Re: Open VPN networking is working but no internet access
Connect with a windows host to the VPN (run OpenVPN as admin), then after connected, open the command prompt, and post the outputs ofnetstat -r nslookup google.com tracert -d 8.8.8.8
View ArticleCan't access Apache after DMZ
I have an ERL-3 and was attempting to open access up to my webserver. I have done this with another server with no problems. However with a siminlar configuration I am running into problems. I'm...
View ArticleRe: CHAP authentication failed - Centurylink Gigabit Fiber
Ahhh should have added I have tried with and without those firewall rules, however I ONLY have interent service. Not sure the firewall rules would affect that. notice any differences between our...
View ArticleRe: CHAP authentication failed - Centurylink Gigabit Fiber
firewall { all-ping enable broadcast-ping disable ipv6-receive-redirects disable ipv6-src-route disable ip-src-route disable log-martians disable name WAN_IN { default-action drop description "WAN...
View ArticleRe: Help with traffic shaping EdgeRouter X
hi nachopro,does this mean you don't use edgeOS anylonger? how'd you install fireQoS on the ERX?Thanks,jeff
View ArticleRe: CHAP authentication failed - Centurylink Gigabit Fiber
I posted my config. I do not see anything specifically that catches my eye.
View ArticleRe: CHAP authentication failed - Centurylink Gigabit Fiber
Yeah just skimmed and all the basics seem the same. Have you tested with 1.9.0 or 1.9.1 firmware as well?
View ArticleEdgerouter X no WAN IP all of a sudden
I have a Edgerouter X connected to a fiberconverter that I have been using for over a year without any problem. Now all of a sudden I'm not getting a WAN IP I tried to connect a computer to the...
View ArticleRe: help: routing internet traffic from Germany to the US via 2 Edgerouter Xs
Cool, from what I understand the fastest point to point would be ipsec gre. I'm curious what the latency would be though being they are that far away. Let us know how you make out.
View ArticleClik here to view.
Inter VLAN with EdgeMax Router and Switch Cisco SOHO
Hello Ubiquiti GURU Hi I'm really confused with the problem. I don't know what I'm doing or I'm just missing something.I´m planning to build the SOHO using EdgeMax Router with Cisco Swtich 2900 I´m...
View ArticleRe: Can't access Apache after DMZ
when your doing manual port forwarding DNAT is done before it hits the firewall. So you need to add a firewall fule allowing the local ip address.
View ArticleRe: help: routing internet traffic from Germany to the US via 2 Edgerouter Xs
you might be better off placing a ER-X at a datacenter here in the us, and pay for it as you will need a fast upload speed. Thanks,David.
View ArticleRe: ARP Broadcasts not being received?
Very often, the wireless bridges behave strangely, if not 'fully L2 transparent', some of these do 'bridging 2.5' ....Try with tcpdump on the AC-Pro for see if outgoing arp replies are...
View ArticleRe: EdgeRouter X Losing Speed
Thanks so much for the very detailed response! I'll have to do some more research as to whether I want to keep the downstream smart queue active. The only thing that I have running that might be...
View ArticleRe: ARP Broadcasts not being received?
I can guarantee that the bridge is NOT fully L2 transparent, which I'm sure is a large part of the issue. I'll have to double check on the source MAC for 45, but I'm guessing it's probably the MAC of...
View ArticleRe: Edge Switch: VLAN rewrite / translation
I don't want to route between these 2 VLANs. I want to rewrite it. Routing and higher intelligence is made at a different point in the network with a Mikrotik device.
View ArticleRe: ARP Broadcasts not being received?
It's way beyond broadcast filtering.An ARP sent from .45 to 192.168.1.127 might be answered directly by Asus device. If the Asus device already knows IP/MAC mapping cached, there's no need to...
View Article
