firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians disable
name WAN_IN {
default-action drop
description "WAN Inbound"
rule 1 {
action accept
description "Accept Related"
log disable
protocol all
state {
established enable
invalid disable
new disable
related enable
}
}
rule 2 {
action drop
description "Drop Invalid"
log disable
protocol all
state {
established disable
invalid enable
new disable
related disable
}
}
}
name WAN_LOCAL {
default-action drop
description "Internet to router"
rule 1 {
action accept
description "Accept Related"
log disable
protocol all
state {
established enable
invalid disable
new disable
related enable
}
}
rule 2 {
action drop
description "Drop Invalid"
log disable
protocol all
state {
established disable
invalid enable
new disable
related disable
}
}
}
options {
mss-clamp {
interface-type pppoe
mss 1452
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address 192.168.1.1/24
description Local
dhcp-options {
default-route update
default-route-distance 210
name-server update
}
duplex auto
speed auto
}
ethernet eth1 {
description "Centurylink WAN"
dhcp-options {
default-route update
default-route-distance 210
name-server update
}
duplex auto
speed auto
vif 201 {
description "Centurylink VLAN"
pppoe 0 {
default-route auto
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
}
mtu 1492
name-server none
password <your PPPoE password>
user-id <your PPPoE user>@qwest.net
}
}
}
ethernet eth2 {
disable
duplex auto
speed auto
}
loopback lo {
}
}
service {
dhcp-server {
disabled false
hostfile-update disable
shared-network-name LAN-DHCP {
authoritative disable
subnet 192.168.1.0/24 {
default-router 192.168.1.1
dns-server 192.168.1.1
lease 86400
start 192.168.1.2 {
stop 192.168.1.255
}
}
}
}
dns {
forwarding {
cache-size 1000
listen-on eth0
listen-on eth1
name-server 208.67.222.222
name-server 208.67.220.220
system
}
}
gui {
https-port 443
}
nat {
rule 5000 {
description PPPoE
log disable
outbound-interface pppoe0
protocol all
type masquerade
}
}
ssh {
port 22
protocol-version v2
}
ubnt-discover {
disable
}
}
system {
config-management {
commit-revisions 20
}
conntrack {
expect-table-size 2048
hash-size 32768
table-size 262144
}
host-name ubnt
login {
user ubnt {
authentication {
plaintext-password "password"
}
full-name ""
level admin
}
}
name-server 127.0.0.1
ntp {
server 0.ubnt.pool.ntp.org {
}
server 1.ubnt.pool.ntp.org {
}
server 2.ubnt.pool.ntp.org {
}
server 3.ubnt.pool.ntp.org {
}
}
offload {
ipsec enable
ipv4 {
forwarding enable
pppoe enable
vlan enable
}
ipv6 {
forwarding disable
}
}
time-zone America/Los_Angeles
traffic-analysis {
dpi enable
export enable
}
}
/* Warning: Do not remove the following line. */
/* === vyatta-config-version: "config-management@1:conntrack@1:cron@1:dhcp-relay@1:dhcp-server@4:firewall@5:ipsec@5:nat@3:qos@1:quagga@2:system@4:ubnt-pptp@1:ubnt-util@1:vrrp@1:webgui@1:webproxy@1:zone-policy@1" === */
/* Release version: v1.8.0.4853089.160219.1607 */
↧
Re: CHAP authentication failed - Centurylink Gigabit Fiber
↧