EdgeRouter Lite Settings for Gigabit ISP
Hello everyone, Just today I got a symmetric gigabit ISP, however when my traffic goes through my router, there is a definite hit taken on the speed. The best I've gotten through my router is about...
View ArticleRe: models with USB drive
ER-Lite and ER5-PoE have USB storage. ER8/ER8Pro are onboard eMMC, but also have a usb port on the front so you could add extra storage with that. Worth noting the eMMC on the ER8/ER8Pro is much larger...
View ArticleIs it possible to make config changes via a cronjob?
ER-poe5 running v1.9.0 I need to change traffic policy (both limiter bandwidth and shaper bandwidth) every evening and morning. Can this be automated with a cronjob?
View ArticleRe: models with USB drive
Thanks . Is there reason to believe that the onboard eMMC in all the other models is more reliable than most all usb drives?
View ArticleClik here to view.
Re: models with USB drive
aluders wrote:Thanks @NVX. Is there reason to believe that the onboard eMMC in all the other models is more reliable that most all usb drives?I've never had any eMMC fail in EdgeRouters. I've had flash...
View ArticleRe: Cloudflare DDNS 1.9.0
Got it thanks to some help from the beta forum. You have to do: set service dns dynamic interface eth5 service custom-cloudflare host-name www.yoursite.com set service dns dynamic interface eth5...
View ArticleRe: EdgeRouter Pro 8 crashing
I have a crash log when it crashed running 1.8.5. PTP Clock: Using sclk reference at 600000000 Hz bio: create slab <bio-0> at 0 usbcore: registered new interface driver usbfs usbcore:...
View ArticleRe: POLICY BASED ROUTING USING DESTINATION PORT
Biggest cotcha: applying firewall modify rule should be:set interfaces switch switch0 firewall in modify FTPMoreover, you're using rule number 21, this is unrelated to ftp being port 21. (but still...
View ArticleRe: Restored ER-Lite with EMRK and can't log into the GUI
kai_h wrote:I'm well aware that this is a warranty voiding exercise, but stay with me for a bit... I had an ER-Lite that the USB flash died in it. I've since replaced it with a SanDisk USB flash drive...
View ArticleRe: EdgeMax rescue kit (now you can reinstall EdgeOS from scratch)
Hi as I can expand the 1.4G partition?i have 16G for Kingston D16GBTSE9H ThanksRegards
View ArticleISP IP Passthrough
Hello, I would buy a EdgeRouter Lite to replace the box from my ISP but before I would like to know if you can configure it to pass the public IP address to the firewall (pfSense) on lan. I not want to...
View ArticleRouted IPTV
Hello everybody, I recently bought a new ERPoe‑5 and try to get working with my ISP. The router will be used for normal internet traffic and IPTV. Configuration:eth0 interneteth0.4 VLAN 4 for IPTVeth1...
View ArticleRe: Restored ER-Lite with EMRK and can't log into the GUI
Hi and thanks for chiming in... I'm adding the users in the configure mode, so they're added to the configuration tree. The GUI seems to load - I can get to the login page, but it reports invalid...
View ArticleRe: OpenVPN CA cert not valid
You only need to specify "-config [file]" if you want to use this config file instead of the default one. Maybe you manage multiple CAs with different matching policies. Then you'd make a copy of the...
View ArticleRe: Is it possible to make config changes via a cronjob?
Write a script like the sample below and install it as a cronjob. That should do the trick. https://help.ubnt.com/hc/en-us/articles/204976394-EdgeMAX-How-can-I-use-scripts-to-change-the-configuration-
View ArticleRe: ERPRO8 (Firware:1.8.5) - Internal LAN as well as Internet is slow
Hi I have tried a switch between Upstream device and the ERPRO8. The status shows connected even after changing the NTU to 100/Full. However the network is incredibly slow as before. I am attaching a...
View ArticleRe: Speed issues. Please review my configuration
To simplify the setup, i have bought a second switch to carry the vlans of the vlans i have to "limit". And then going to force the port to 100 mbps That raises a question about edgemax setup. How do a...
View ArticleRe: Newer Kernel Requested
I have just compiled and run a 4.7 kernel on my development ERL-3 which doesn't do much routing. It has been stable and running for about 12 hours without problems though more time in a routing...
View ArticleRe: ER-X SPF questions about SFP port
Hi, Djursland01, I recommend this site for you to choose from: http://www.fs.com/I have bought many times here and they never fail me. Hope it helps!
View ArticleDMZ under edgerouterconfig.nl config cannot reach internet!
Hi, Used the config from https://www.edgerouterconfig.nl/basis-community-config/ with v1.8 ERL firmware which has the following configurations: eth0 = WANeth1 = LANeth2 = DMZWAN is on the basis of...
View Article
