Re: eth0 interface disappeared
Sir, once i get a chance to do that I'll do. It's just I am busy working and dealing with random edge router mess up is not my priority right now. I will look into it when i can can. This should not...
View ArticleRe: How to manage ER-X configured as switch?
Thanks for those ideas. I can ping the ERX 10.1.2.16 from the ERL (but not from the PC which is at 10.1.1.54). After hours, I will try connecting the ERX directly to ERL eth2 and see if that changes...
View ArticleRe: How to manage ER-X configured as switch?
"Double check your IP address set up on the ERX. Ensure you have the correct mask and gateway." Mask and gateway entries are not input for ERX switch0 configured with a static IP. Should I be looking...
View ArticleRe: ddclient with Load Balance
Similar issue has been deicissed here -> https://community.ubnt.com/t5/EdgeMAX-Beta/BUG-lb-local-not-working/m-p/1757416/highlight/false#M18823 Root cause is that locallly generated traffic is being...
View ArticleRe: How to manage ER-X configured as switch?
On ER-X ,use a route of type "gateway", as in the 1st of 3 route screenshots. But next hop should be set to 10.1.2.1.
View ArticleRe: How to manage ER-X configured as switch?
To add default geway. Using a broswer, connect to the ERX.. at the bottom of the main UI page click on System Tab - If System gateway address: is blank, add your gateway address - scroll down further...
View ArticleRe: Private Internet Access Open VPN - Step by Step Configuration
Thanks, Yeah I like having the different WiFis for VPN and no VPN. My main use is streaming purposes. I just recently moved out of country so I can easily switch devices back and fourth from VPN and...
View ArticleRe: How to traceroute spec port in CLl
If you want to find out if specific port is open/listens then you may want to use nmap, telnet or curl.
View ArticleRe: How do you Upgrade X SFP to 1.9.1 ?
Ok unfortunately i lost everything When i tried to backup config it was Timing out in the browser.I was not able to save to config. The only way to fix my issue was to do Hard Reset and yes i had to...
View ArticleClik here to view.
DPI with Zone-based Firewall?
Hi guys, has anyone successfully implemented a zone-based firewall including DPI based filtering? I've got an ER-8-Pro with 8 zones and one ruleset per pair (lan-wan, guests-wan, lan-local,...
View ArticleRe: Private Internet Access Open VPN - Step by Step Configuration
Definitely add route-nopull to your VPN config.Remove source clause from NAT rule 5000.You didn't define table 1 to interface-route 0.0.0.0/0 to vtun0.
View ArticleRe: Hairpin NAT not working since 1.6.0 > 1.9.0 upgrade
Its working for me. I'm in 1.9.1 with a edge lite and the hairpin works perfect... I did do every upgrade in succession up to 1.9.1 and I started my config after 1.9.0 not sure if that has anything to...
View ArticleRe: How to manage ER-X configured as switch?
Adding the gateway 10.1.2.1 on the system tab also worked. Thanks for the tip.In the end I used the Static route to gateway 10.1.1.0\24 with next hop 10.1.2.1 because adding the route did not require...
View ArticleER-X and Unifi UAPs with VLANs
Hi to All I have to build a simple office network using one ER-X and three UAPs (one standard AP and two AC Lite's) Network will be used by three companies, lets name them A,B,C. There will be also...
View ArticleRe: How To: Install BIND DNS Server on EdgeRouter
running the P2 version for more than 24h without any problems .... this seems to be the first stable version *fingers crossed*
View ArticleRe: How to manage ER-X configured as switch?
In summary: If an ER-X configured as a switch is to be managed by a PC from a different subnet on an ER-Lite you shouldadd a gateway to the system tab on the main page (10.1.2.1 in my situation) oradd...
View ArticleRe: VRF - Patches and working binaries inside!
VRF-Lite is a version 2.0 roadmap feature. The beta should arrive in the late March early April.
View ArticleL2TP too slow
I am only getting around 250 kbps performance on LT2P to a Windows 7 client - painfully slow. I swapped in my old SonicWall TZ170 and I get 2500 kbps (with their GlobalVPN). How to fix this? The VPN is...
View ArticleRe: How to manage ER-X configured as switch?
The correct way would be to add all the network information when using the Wizard to confing the ERX for switch mode..Ip address, Netmask, Default gateway..
View ArticleClik here to view.
Re: How To: Install BIND DNS Server on EdgeRouter
Sounds promising! I have run mine since friday when I released the packages here without any issues. //Anders
View Article
