1.9.1 ERL: DHCP server stopped updating DNS servers
Hi,after updating my ERL to 1.9.1 the DHCP server stopped updating the DNS server, which resides on a different host. Prior to the ERL update, it worked like a charm. I'm quite certain that I didn't...
View ArticleRe: ERX v1.9.1 firmware issue? router locking up hard!
as you can see, it's locking up about every 8 hours. when i first got the unit, 1.7 ran for 2 days, before i starting updating firmware, beginning saturday.
View ArticleRe: ERX v1.9.1 firmware issue? router locking up hard!
No such known bugs I know of. Post your config. Have you checked the logs on the router?
View ArticleRe: Blocking Internet access of host on WAN_OUT or LAN_IN
thanks and good point. quick question how you would you make the firewall destination to block only internet but not the other subnets from the LAN_IN firewall rule? Currently I have a LAN_IN rule...
View ArticleRe: Help With Firewall Rules On Edgerouter Lite (ERL) Restricting Traffic...
Thanks for the reply. I was able to setup firewall rules on Eth 2 to a) deny access to the router setup (through Eth 1) and to separate 1 network (interface) from the other. However I still cannot seem...
View ArticleRe: Help With Firewall Rules On Edgerouter Lite (ERL) Restricting Traffic...
Try configure edit service mdns repeater set interface eth1 set interface eth2 top commit save exitsetting the interfaces to whichever you want to discover across.
View ArticleRe: Help With Firewall Rules On Edgerouter Lite (ERL) Restricting Traffic...
Thanks, will give this a try tonight
View ArticleRe: Private Internet Access Open VPN - Step by Step Configuration
First off thank you for this, I seem to be having some issues as once i enable vtun0 my internet goes down completely. nothing goes out I have one machine in the OPENVPN_COMPUTERS 172.30.95.55 that is...
View ArticleHow to / Setup Guide to Configure iOS / iPhone to use Ubiquiti Router L2TP /...
First off, I take zero credit for creating these rules and commands. What I'm doing here is consolidating information from 3 or 4 different threads into a single location. Hopefully I hit enough...
View ArticleRe: Bandwidth of Site-to-Site VPN
I'm finally able to max out my upload with the new Netgear CM700. It's been about 7 months since I've been dealing with this. Thanks for replying back to the thread about the modem issue. I would have...
View ArticleRe: Private Internet Access Open VPN - Step by Step Configuration
Thanks a ton for all the information. I very carefully read through this posting and the previous posting that stemmed this one. I am new to any kind of enterprise networking and definitely new to...
View ArticleHow to traceroute spec port in CLl
what is traceroute from spec. external IP & spec port command in edgemax CLI? Thanks
View ArticleRe: Multicast, Sonos, Phorus & Play-Fi Broadcast 255.255.255.255: Discovery...
Does this work on a USG-Pro-4? Thinking about setting up a site-to-site with a USG and USG-Pro and would like select broadcast traffic to traverse
View ArticleRe: ERX v1.9.1 firmware issue? router locking up hard!
i'm a newb, how do i access the config? what's the best way to post them? when i locks up hard, i can't access the logs. i'm running 1.7 now and has been up 3 hours.
View ArticleRe: ERX v1.9.1 firmware issue? router locking up hard!
ok. here's the 1.7 config file:ubnt@ubnt:~$ cat /config/config.boot firewall { all-ping enable broadcast-ping disable ipv6-receive-redirects disable ipv6-src-route disable ip-src-route disable...
View ArticlePrioritize traffic for IpSec tunnel
Hi, We have a tunnel which is connected to a cloud service where all our LOB apps are run. We'd like to make sure this tunnel gets the highest priority amongst all other traffic going out through the...
View ArticleRe: Requests/suggestions for new hardware models
Ideally would be looking for something along the lines of the Juniper EX2300-C series, 8-16 gig ports and a couple of 10gb ports, rackmount, passive or at least low noise fans. Preferably an option of...
View ArticleRe: Windows DHCP clients have to use FQDN to resolve local hosts
Only problem I've run into is I was specifying different DNS servers and default GW for a specific host with the static-mapping-parameters command and I can't seem to figure out how to do that with...
View ArticleRe: EdgerouterX
ipsec will setup it's own route table #220 , having only the 0.0.0.0 route.This will overrule all other routes.Ugly hack: add script , that after startup adds your local LANs to table 220, using...
View ArticleClik here to view.
bonding + vlan
Hi dear community! Can I realise this scheme and what best solution for it?In router i configure:bounding bond0 (eth2 + eth3) layer2 802.3.adboundifg bond1 (eth4 + eth5) layer2 802.3.adwhere I need to...
View Article