Re: To enter on account not ip doubt
This isn't going to do you any good: nat { rule 1 { description servidor destination { port 5950 } inbound-interface eth0 inside-address { address 192.168.2.201 port 5950 } log disable protocol tcp...
View ArticleRe: Restoring configuration file from EdgeRouter to EdgeRouter Pro
Did you perchance try loading from a factory default state? Yeah, that doesn't work, because some hooks are missing (and the router is a bit stupid in the load and does things out of order with how it...
View ArticleRe: To enter on account not ip doubt
My friend could you tell me the steps I should follow?I do not know what I have to do
View ArticleRe: EdgeOS CLI Primer (part 1)
You can install these tools via apt-get. Make sure you configure repos first.
View ArticleClik here to view.
Re: Help getting a noob off the ground - WAN and 3 LANs with a DNS server...
Yup -- that "accept established / related " rule lets "requested for" traffic through. Here's a diagram of the router's logic / featureset Let's say the cloud on the left is your local LAN, and the...
View ArticleRe: Questions about ER-X-SFP
1) Yes. Make sure you upgrade to latest firmware first.2) No USB stick in ER-X / ER-X-SFP. Flash only.3) No problems.4) Yes. Same EdgeOS and functionality on all ER models.
View ArticleClik here to view.
Re: Questions about ER-X-SFP
BranoB wrote:1) Yes. Make sure you upgrade to latest firmware first.2) No USB stick in ER-X / ER-X-SFP. Flash only.3) No problems.4) Yes. Same EdgeOS and functionality on all ER models.thx for quick...
View ArticleRe: Restoring configuration file from EdgeRouter to EdgeRouter Pro
That's really helpful. The new router came with firmware 1.3 and when I upgraded to 1.9 (the first thing I did) it didn't give me the prompt to run one of the wizards because it was in a factory...
View ArticleRe: Restoring configuration file from EdgeRouter to EdgeRouter Pro
yeah, since it booted up, all should be fine. I do enough "new routers" that I just keep a "my defaults" around, and load it up after running the basic wizard. I'd really love it if the load feature...
View ArticleRe: Time to update the guts of the ERL?
As the external line rate reaches the internal line rate, the requirement for QoS drops off. If the router is capable of forwarding every packet that comes in as soon as it comes in, there's nothing...
View ArticleRe: EdgeRouter X - High latency to ERX when under load
Check if offloading is really enabled."show ubnt offload". When there is a process or setting that prevents offloading, it can be disabled even when it is enabled in the config. You should see...
View ArticleSecond set of eyes on loadbalancing failover config
Hey Everyone, So been working on this configuration for about 3 months, I can't seem to access the VLAN 1 from my "Home" VLAN which is possible on the current configuration that I built this...
View ArticleGUI IPSec Site to Site not going up. ERL to ERX
I've tried configuring an IPSec Site to Site between an ERL and an ERX and it's not going up.It seems that you guys are pretty good at this?Can someone please take a quick look in my config files and...
View ArticleRe: Edgerouter Lite - 10/100 on WAN instead of 1000
I am also on EPB fiber, and can pull about 120mbps on the 100mbps connection with my ERL. Your config looks pretty good, the traffic control/QoS has the right number of zeros, nothing stands out for...
View ArticleRe: Time to update the guts of the ERL?
Fair point on QoS. But Bridging caught me out. My1Gbs line dropped to ~80mbs. Disabling QOS brought it to ~130mbs. Turning off bridging to about 400 to 600mbs. Turning off DPI took it back to around...
View ArticleRe: Edgerouter Lite - 10/100 on WAN instead of 1000
EDIT: Disregard, I missed the part you did plug straight into your end device...I'd double check CLI and ensure offloading is enabled. Have you tried testing the speed straight from the ONT device?...
View ArticleRe: Will this rj45 to usb cable work for console ?
This is nicely built, is available via Amazon Prime, and works on macOS with no attitional drivers:EDIMS 6 FT FTDI Chip USB RJ45 Console Cable for Cisco Routersjust used it successfully to bring back a...
View ArticleRe: Can someone check my config please?
Great.Yes WAN 1 and 3 are in the same subnet.I'm completely new to code. I appreciate your help but it seems you assume that everyone has a specific amount of as knowledge. I do not. I can appreciate...
View ArticleRe: Can someone check my config please?
They did disable offloading but not in later f/w versions.
View Articlevlc or iperf causing packet loss
I have attempeted to use VLC to stream video through both an ERX and ER Pro. Both times, as soon as the connection is made, I receive a few dropped packets and the video stops playing. Occassionally I...
View Article
