Re: Port forwarding from inside and outside network
"ok" firewall { all-ping enable broadcast-ping disable ipv6-receive-redirects disable ipv6-src-route disable ip-src-route disable log-martians enable name WAN_IN { default-action drop description "WAN...
View ArticleRe: Managing EP-R6 configured as a switc carrying VLAN
I created the VLAN and set the ip. I am now able to reach the EP-R6 via that IP. This created some more questions for me. If I want a port to carry VLAN 2, 3 and 4, I would add VID 2, 3 and 4 to that...
View ArticleEdgerouter blocking L2TP authentication?
hey guys, it looks like i've got a pretty weird problem,i have a VPN server set up behind Edgerouter, and using L2TP.i then have forwarded 500, 1701 and 4500 port to that IP. However, whenever i try to...
View ArticleRe: Ege Router Lite Dropping Connection to DSL Modem in Bridge Mode
Yup! DHCP Server quit and nada! down again. v1.90a2 2 Possibilities.. 1. The DHCP Server is shutting down randomly.2. The Internet Connection & the DHCP Server is dropping out randomly. I have hard...
View ArticleEdgeRouter Lite not working after sitting on shelf for 6 months
So i used the ERL for a long while and then switched to a PFsense box to run some tests with that. after 6 months of using the PFsense box I decided that the ERL should be more than capable for my...
View ArticleRe: Edgerouter blocking L2TP authentication?
Post your configuration. I'm more inclined to think that there's something up with the VPN server or client configuration. Any other details on how you have thigns set up?
View ArticleRe: Edgerouter blocking L2TP authentication?
Are you using a Windows Server for the VPN Server? If so, google L2TP behind NAT. Small annoying registry fix. If you are also doing DFS, you need to update your hosts file.
View ArticleRe: EdgeRouter Lite not working after sitting on shelf for 6 months
Get a new USB drive and flash on one of the pre-built images from HERE, or follow manual process to create USB from firmware download HERE.
View ArticleRe: IPSec x509 VPN Setup on ER POE Fails
Can you please share your steps to make this work? I tried adding Subject Alternate Name on openssl.cnf and I am still unable to make this work.
View ArticleRe: Bandwidth of Site-to-Site VPN
Two things: - make sure hardware offload is enabled on the EdgeRouter Lites. - don't use the speed test built-in to the router as it's CPU-bound. test from computers behind the routers on each end,...
View ArticleClik here to view.
Re: Edgerouter blocking L2TP authentication?
thanks for reply. i was using default synology VPN servcer, and another one was mac server, also default configuration. both having same issue. also, when i try to use the same credentials setting up...
View ArticleRe: Edgerouter blocking L2TP authentication?
no... i tried mac server and synology VPN server, i dont have a windows machine....
View ArticleRe: EdgeRouter X - High latency to ERX when under load
Since download speed is way lower than configured max, I don't expect packets queue-ing up.What's the CPU load on ERX when ping response is slow?
View ArticleRe: Port forwarding from inside and outside network
Config looks fine.You're also using the outside port numbers (2001....2003) on connection attempt?
View ArticleClouDNS Dynamic DNS
I am trying to setup a Dynamic DNS on ClouDNS, where I get my DNS servers hosted. For Dynamic entries they have a choice of the following to choose from as an IP update: URLwgetPERLPythonPHP Which one...
View ArticleRe: ERL-3: upnp2 no longer working after upgrade from 1.8.5 to 1.9.0
Same here, theres a discission with the minupnpd developer here: http://miniupnp.tuxfamily.org/forum/viewtopic.php?p=4740&sid=3051e6eb9f472671fb98e3664051db1d#4740 Sadly I don't yet see an...
View ArticleRe: Not able to get site to site VPN up
Just a quick update on this: I think the problem was that I had moved to connecting to my ISP via connections that were not bridged and so the setup for the VPN should have been modified. I have forced...
View ArticleRe: Port forwarding from inside and outside network
16again wrote:You're also using the outside port numbers (2001....2003) on connection attempt?Yep
View ArticleRe: Port forwarding from inside and outside network
Was able to sovle this by using `switch0` instead of `eth1` as the lan interface.
View Article