Re: OSPF packets lost after reaching FULL state
This line triggered me , in assuming the VPN gets broken after adding the learned OSPF routes23:13:02.511659 IP 192.168.179.95.500 > x.y.z.101.500:double check that ospf routes don't conflict with...
View ArticleRe: Dual WAN Failover: Restrict Device to WAN 1 (no connection on failover)
Not using failover means: use main routing table.If main routing table has 2 default routes with equal metric (equi-distant), packets will still be sent on both links in 50/50 ratio. To force 1 link...
View ArticleRe: ERPOE DNS Questions.
Sure, you can. Dnsmasq has an option 'strict-order' which instructs dnsmasq to always forward requests to upstream servers in the order you specified. In your case, put 192.168.x.x first and google the...
View ArticleRe: Setup as router only
eth2 needs subnet configuration.Add default route , if more networks are attached on inside, you need to configure static routes for them Use firewall to local-host rules, so you're not exposing the ER...
View ArticleRe: IPv6 DDNS script
#!/bin/bash run=/opt/vyatta/bin/vyatta-op-cmd-wrapper updater_client_key='your_updater_client_key_here' user='username' hosts='example.dyndns.org,another.dyndns.org'...
View ArticleRe: Poor VPN performance
I would second the IPsec recommendation. Whenever feasible, use IPsec instead. It's way faster with lower CPU utilization because EdgeOS enables support for HW cryto offload. For example, IPsec can...
View ArticleRe: IPv6 DDNS script
Nice! Now if some gurus can make this into a Wizard or incorporate this into the EdgeOS!!!!!!
View ArticleRe: OSPF packets lost after reaching FULL state
Hmmm... it makes sense... The remote endpoint of the VPN (fw2's upstream interface, x.y.z.101) IS in the OSPF database. AS External Link States Link ID ADV Router Age Seq# CkSum Route Tag...
View ArticleClik here to view.
Re: is this possible? Edgmax as man-in-the-middle to capture network traffic...
some other information: at least my netflow config is correct: on my capture machine (192.168.4.54), I see incomming packets: But it seems a broadcast from the Edgemax itself (192.168.4.5) to port...
View ArticleRe: ERPOE DNS Questions.
Got it. Thank you. Kudos. Here's the whole setup in case anyone else is in this position: DNS DNAT rule for all port 53 traffic on the LANs pointed to the ER, except the pihole IP address. Pihole...
View ArticleRe: EdgeMax pro 8 crash with only bgp after opening the web interface
mdassilva wrote:Edgemax pro 8 crash with only bgp after opening the web interface....does not login more in the web interface and after it stopped the crash.So your ER crashes when loging via WEB...
View ArticleRe: Policy-based routing (source address based) not working in EdgeMAX 1.9.0...
Hi kevinm207, I'm having exactly the same issue. The problem is that source routing rules apply *before* your (and mine) openvpn connection gets established and "vtun0" gets created. This means that...
View ArticleHelp to design my network
Dear community!Please help me design my home network for best performance. I have fiber2home solution with 250 Mbit, an Edge router(ERPoe-5) + an 24 gigabit switch(TP-link)some of my devices require...
View ArticleClik here to view.
EdgeRouter PoE Ipsec site-to-site
Hello, I have setup 2 EdgeRouter PoE 5, both are working fine to provide internet and L2TP vpn, the ipsec tunnel is up and running but I can't get any traffic passing between the two. Main Office : WAN...
View ArticleRe: Policy-based routing (source address based) not working in EdgeMAX 1.9.0...
Just a quick follow-up - I simply downgraded to EdgeMax 1.7.0 and everything works as expected. Someone filled a bug to devs already?
View ArticleRe: PPPoE server problems
KennethG wrote:...We use RADIUS for authentication....ubnt pppd[12851]: peer refused to authenticate: terminating link... Try testing without RADIUS authentication. Do you still observe same issue...
View ArticleRe: is this possible? Edgmax as man-in-the-middle to capture network traffic...
Hi , can you ellaborate this a little bit? Is there a command for this (especially because I don't do NAT)?
View ArticleRe: Edgerouter Lite config file for 1 Wan, 1 Lan and 1 VLAN for Guest Wifi
With setting up the ER the way that I mentioned, you shouldn't need to mess with any relays (the ER is already handling DNS / DHCP for that secondary VLAN). If you want to use the "guest isolation" and...
View ArticleClik here to view.
Re: Edgerouter / Watchguard site-to-site VPN. Established connection, no traffic
Wow, great to hear the happy ending - pretty impressive also to come back to the thread after all this time! Thanks for the shoutout
View Article
