Re: ERL 1.9 - Use DNS name for firewall source address
I'm not aware of Netfilter (the firewall/NAT in Linux) has such a feature but I could be wrong. I expect a feature like this would significantly slow down the swiftness of Netfilter anyway. Seems to...
View ArticleClik here to view.
Re: Policy-based routing (source address based) not working in EdgeMAX 1.9.0...
Yes, that's the reason. No problems with previous firmware versions.
View ArticleRe: ERL 1.9 - Use DNS name for firewall source address
Yep that was the first thing I checked. Netfilter doesn't support it. Can't hurt to ask if it can be implemented as a feature into the ERL 'configure' program. You're right, the best solution for now...
View ArticleRe: ER-PoE constant high CPU since 1.8.0
Those symptoms might be caused by new interfaces constantly appearing/disapperaing and triggering routing protocol update scripts (ubnt-static.pl, ubnt-ospfs.pl, ubnt-bfd.pl...). To troubleshoot this...
View ArticleClik here to view.
Re: ERL 1.9 - Use DNS name for firewall source address
The script shall be simple. Could be as few as three lines. I gave you two essential lines to do the update already. Plain shell command line. No Vyatta CLI required. To schedule a cron job in EdgeOS,...
View ArticleRe: Yet another "L2TP service keeps dying" post
yes in Web GUI Config Tree best regards
View ArticleRe: EdgeMax rescue kit (now you can reinstall EdgeOS from scratch)
In case you would want install other debian packages eg I had squid running on this...you need more space
View ArticleRe: unblock US Netflix with dnsmasq
Try unitedly.com it is not a VPN but a DNS masking service for as low as 5$ USD per month. It really works if u r willing to pay the cost
View ArticleRe: unblock US Netflix with dnsmasq
Try unotelly.com it is not a VPN but a DNS masking service for as low as 5$ USD per month. It really works if u r willing to pay the cost
View ArticleRe: Automatic, recurring IPSet commands
itis possible that thisis due to service cutsVPNipsec/l2tp.these cutsarerandom as explained here :...
View ArticleRe: EdgeRouter X-SFP PoE Issue
The one Unifi-PRO takes 48V passive or 802.3af power, not 24V passive. It won't work. The second Unifi-AC, is that the Pro model too? Because Unifi-AC-Pro takes 48V passive or 802.3af power as well.The...
View ArticleRe: EdgeMax pro 8 crash with only bgp after opening the web interface
Do you have a console cable that you can use to access ER when it becomes unreachable (instructions)? When issue repeats (...lose its memory up to 40% free and after it begins to lose ping and...
View ArticleRe: 1WAN used instead of combination of other WAN (Load Balancing)
pandera999 wrote:Hi, i tried the method for modify balance in LAN. Buti have face this issue ubnt@ubnt# set interfaces ethernet eth4 vif 10 in modify balance The specified configuration node is not...
View ArticleRe: Policy-based routing (source address based) not working in EdgeMAX 1.9.0...
16again wrote:@mihandro wrote:reason - source routing rules apply before interface becomes active.Seems to me the reason is: you can't add a route to a table for an interface that's down. This keeps...
View ArticleRe: EdgeOS 1.9: PPPoE "% Malformed gateway or interface not found"
The "Malformed gateway or interface not found" message means that routing daemon is not aware of pppoes72 interface which is strange because you see it via show pppoe-server. Lets compare list of...
View ArticleIpsec 2 of the tunnel 2 ISP
Hello. $ show version Version: v1.9.0 Build ID: 4901118 Build on: 08/04/16 11:39 Copyright: 2012-2016 Ubiquiti Networks, Inc. HW model: EdgeRouter Pro 8-Port HW S/N: 24A43CB36E47 Uptime: 12:32:03 up 1...
View ArticleClik here to view.
Re: 2 IPS, loadbalance and IPTV-box working only with first IPS
Yeah, you'll need igmp-proxy for the IPTV. Luckily it's pretty straightforward
View ArticleRe: BFD interface settings ?
UBNT-Arthur wrote:This command should work. Could you elaborate the issue? I'm testing and will get back soon :-)
View ArticleRe: BFD interface settings ?
Where can I find complete Command List for BFD on EdgeRouter ?
View ArticleRe: HTTP/HTTPS/DOMAIN available on WAN port
where are you running nmap from? If it's from a host on the inside, then it's working as expected, as it will be the "LAN_LOCAL" firewall (default = accept) that is allowing the packets through, rather...
View Article
