Re: Tagging, untagging, Trunks, VLANS. 2 WAN - trunk
It was a partial solution, removing the pvid on the trunk port completely seemed to take care of it. Thanks!
View ArticleRe: EdgeRouter X Tag and Untag Ports Layer 2 Traffic
So it appears I have finally got it working, although its not how I figured it would of worked.... ERX1 on switch0 eth1-PVID 100eth2-PVID 200eth4-VID 100eth4-VID 200 ERX2 on switch0eth4 VID 100eth4 VID...
View ArticleER-X running SquidGuard 1.9.0 - does it work?
I setup SquidGuard on an ER-X SFP running 1.9.0. The next day it locked up. Had to pull the power to get it to respond and start passing traffic. Noticed now the filtering isn't working. I would like...
View ArticleRe: Edgerouter X is it possible to setup with multiple vlan?
Absolutely. I set a couple up now. Have one place running 3 APs off the ER-X with multiple VLANs trunked to the APs. Also have one port trunked to an HP switcfh to separate staff, student and printer...
View ArticleRe: Edgerouter X is it possible to setup with multiple vlan?
Make sure you upgrade to firmware 1.9.0 first.
View ArticleERL ping failure
I just setup an ERL at my daughters apartment to resolve some QoS issuues. It's working great and I used the first run basic setup wizard to set her ISP's static IP info. She has fantastic connectivity...
View ArticleRe: internet speed issues
Hello All, I'm back sorry it's been a while, I've removed the power brick and just powering the router with it's power supply. When set the WAN port to 100 FDX i get less speeds. I'm running cat5e...
View ArticleRe: HE tunnel not working anymore
7tigers wrote:Yes, I am trying to configure the change in IP address on the HE web portal and it's not working because HE can't ping my router anymore. I deleted the HE tunnel and want to start over,...
View ArticleRe: Problem with only edgerouter itself accessing IPv6 WAN IP addresses
Well, what does your WAN6_LOCAL look like?
View ArticleRe: Disable IPv6 by host mac addr?
Based on your description, I conclude that I'm in the same boat as you. Did you make any progress on this?
View ArticleRe: ERL ping failure
Add a firewall rule to your WAN_LOCAL. Name: Allow ICMPAccept protocol ICMPEstablished, Related, Recent Time: 15 Make sure this rule is on TOP in the firewall tree.
View ArticleRouting from VLAN blocked
Hi,I just bought an EdgeRouter POE5 router, and I'm trying to configure it with a VLAN (for a guest wireless network).I started with the WAN+2LAN2, connected the wireless access points to the second...
View ArticleRe: Which router for gigabit fiber?
Well, Fiber7 officially acknowledged the problem but is shifting the blame to Ubiquiti: https://twitter.com/fiber_7ch/status/782840133510918144 Meanwhile the reply I got was: "We tried to auto-neg on...
View ArticleRe: Martians from 0.0.0.0
Its seems it's not a bug, it's a warning with a risk of IP spoofing nothing related to ubnt:http://www.linuxquestions.org/questions/linux-security-4/getting-martian-source-messages-185672/ I'm...
View ArticleClik here to view.
Re: WAN Watchdog Edge Router-X - the easy way...
Thank you very much for your solutions, I'll try them!
View ArticleIssues with BGP AS pre pend
Hello, Im am having some Issues with AS pre pend using EdgeRouter pros. When I run "show ip bgp neighbors advertised-routes"The path that is displayed looks like how I have configured the devices,but...
View ArticleRe: Which router for gigabit fiber?
A friend of mine has exactly the same problem. He lost ipv4 connectivity from Friday to Saturday night. The ER-X SFP was working fine for several weeks with 1.9.0 before that incident. Also the ipv6...
View ArticleEdgeOS v1.9.0 | ICMP Ping OK, but no WebUI, no SSH
Hi Guys, in the last days we hit some very strange things... We upgraded EdgeOS from 1.7.0 to 1.9.0 and at the same time we upgraded our PtP Link PBE-M5-400 from 5.6.2 to 6.0-beta13. We discovered some...
View ArticleRe: EdgeMax Router + AirFiber + Cisco Switch
In my setup, you'd have something like this: site A ERLeth0 -> WANeth1 -> AF to site Beth2 -> SiteA LAN siteB ERLeth0 -> AF to siteAeth1 -> AF to siteBeth2 -> SiteB LAN siteC ERLeth0...
View Article
