Quantcast
Channel: All EdgeRouter posts
Browsing all 60861 articles
Browse latest View live

Re: Port forwarding is not working at all, port remains closed.

Go here http://www.whatsmyip.org/ and compare that your WAN IP with what you see on the interface. If you want, PM me your real public IP and I'll scan it from here. ... and let me know to which port...

View Article



Re: Port forwarding is not working at all, port remains closed.

Trytcpdump -i pppoe0 'tcp port 2001' or tcpdump -i pppoe0 'tcp port 2001' > /config/tcpdump.2001

View Article

Port forward on new subnet

Hello, Not very good at this networking stuff so go easy on me. So my network is like this:Modem>Edgerouter X>UAP AC PRO Previously my connection went like so:My computer>UAP AC PRO via...

View Article

Re: Port forwarding is not working at all, port remains closed.

 Thanks, but I don't really feel comfortable given out my public address. I'm sure you understand. However 'whatsmyip'confimed the same address as what's in my config  So, I ran that command with the...

View Article

Re: Port forwarding is not working at all, port remains closed.

rgalley wrote:@BranoB Thanks, but I don't really feel comfortable given out my public address. I'm sure you understand. However 'whatsmyip'confimed the same address as what's in my config As you wish,...

View Article


Re: Port forwarding is not working at all, port remains closed.

21:35:06.913831 IP (tos 0x0, ttl 53, id 48606, offset 0, flags [DF], proto TCP (6), length 60) 122.177.30.250.44422 > bas3-harris14-3477892200.dsl.comu.org.2001: Flags [S], cksum 0xc77f (correct),...

View Article

Re: 1.9.0 broke dashboard for me (using Firefox)

Everything is still working perfectly here - on both Safari and Firefox. I would imagine there'll be a general release with this fix shortly, but am assuming they wanted to leave it a day or two to...

View Article

Re: Port forwarding is not working at all, port remains closed.

This confirms that something from 122.177.30.250 (probably the scanner you're using) is hitting your port 2001. So the ISP is not blocking the port.

View Article


Re: 1.9.0 broke dashboard for me (using Firefox)

Agree that the patch appears to have resolved the issue with the GUI loading in Firefox. I do think that they will include the fix in the next release, but I am not certain that the test has been long...

View Article


Re: switch0 and vlans confusion

tribunal88 wrote:I was having this exact problem tonight and what shook it loose was to reboot the router. After that, all my VLANs on the switch started responding.It is also worth noting that any...

View Article

Re: Poor Quality Video Streaming

Hi er824,When you say you have smart queue enabled do have it for both upload and download?Also what is your connection speed and what values/speeds have you placed on the qos page?Thanks

View Article

Re: EdgeRouter Pro 8

Hi ottunifi,Unfortunately I can't help you with questions 1 or 3 but i have some ideas on question 2.For question 2 if i understand you correctly you want to limit each port ex: (eth1) to 20mbit down...

View Article

Re: EdgeRouter Pro 8

Why not use VLAN to saperate the different departments? Having 5 switches seems too much to me. 😂😂😂Thanks,Jack.

View Article


Re: EdgeRouter Pro 8

Set up a firewall rule to prevent Inter-Interface routing. It's a little bit like preventing interVLAN routing, but the difference is that you are handling interfaces not VLANs. Make a new ruleset for...

View Article

Re: EdgeRouter Pro 8

For question 3, if you enter your UniFi Controller's info into the DHCP Server, the router will FQDN record for *unifi* allowing your APs to resolve *unifi*. *unifi* is their default inform address. As...

View Article


Re: Poor Quality Video Streaming

I pay for 15 Mbps down / 1 Mbps up though actual performance seems to be closer to 20/1.5. Yes - I have Smart Queue turned on for both up and down. Upload is set to 1.2 Mbits/sec and Download is 17...

View Article

Quick sanity check on a new config please

Deplying my first Ubiquiti device, an ER-Pro8. I just wanted to post my config before i take it out to the client site and see if anyone sees any glaring errors. I have configured many Cisco,...

View Article


Re: Quick sanity check on a new config please

looks fine why so many rdp to internal that must be headache to deal with rdp gateway if they domain jion might be option or vpn less ports to open

View Article

Re: Quick sanity check on a new config please

I'm inhereting this client from someone else and they had it configured that way. For now I'm just replacing their aging cisco 2800, hopefully soon I can start improving other things.  Thanks for...

View Article

Re: Poor Quality Video Streaming

Hi er824,Thanks for the infoIt could be possible that your internet speed is not fast enough to support both at the same time.But that would be strange because smart queue should prioritize video...

View Article
Browsing all 60861 articles
Browse latest View live




Latest Images