Re: Unclear on EdgeRouters and their switching
The ERPoE has a hardware switch on eth2-eth3-eth4 (and a fourth port connecting to the CPU so it can route). If you look, there's a line on the front of the router connecting those three ports, to...
View ArticleRe: L2TP and IPSec with EdgeOS 1.9.0 not working
Well, I figured it out (and feel like I'm talking to myself in this thread...). The only issue was the the DNSMasq daemon wasn't set to listen on the L2TP tunnel, as I mentioned above. I looked around...
View ArticleRe: AirPlay Availability on WAN+2LAN2
This is a different problem from what is described in teh original thread - you have an EdgeRouter X which has a switch, and you have the ER-X configured for one network. The OP had an Edgerouter Lite...
View ArticleClik here to view.
Basic networking help
Hi all --First, thank you in advance for your help. By way of background, I am fairly new to networking, but have a good understanding of the basics, i.e. I understand IP addressing, I've done basic...
View ArticleRe: Unclear on EdgeRouters and their switching
gfunkdave wrote:I seem to recall that bridging can restrict throughput to something like 10-20Mbps (though I'm sure someone will correct me with the correct number if I'm wrong).On the ERL it is about...
View ArticleRe: Unclear on EdgeRouters and their switching
Are we talking wan to lan throughput? What about lan to lan?
View ArticleRe: ERL3 to ERL3 IPsec WebGui
sorry.. been away and just got back. i would also really like to stick to 1.9.0 since you have advised that it would work. I couldn't figure out how to bridge my Modem so can i port forward instead?...
View ArticleRe: Unclear on EdgeRouters and their switching
WAN to LAN on the 100 Mbps I cited. Never measured LAN to LAN myself. That could be broken into two interfaces in the bridge or one interface in the bridge and one not (not so applicable to the ERL...
View ArticleRe: Unclear on EdgeRouters and their switching
So to achieve max possible throughput, you basically have to use eth0 and eth1 (wan > lan) or eth0 and 2,3,4?
View ArticlePlex won't work on internal LAN. It can't connect to my local server. ERL on...
I'll preface this by saying this was working on my previous router setup—an Asus RT-N66u running Toastman's TomatoUSB firmware. I've got a Plex server running on a Mac running OS X 10.11.6. My router...
View ArticleCan I generate a single .ovpn client file for import to OpenVPN programs?
I have an edgerouter lite running version 1.8. Below are the files that I have generated in my directory and I have included the configlet for my openvpn server interface. Can someone please help me...
View ArticleStrange FW log entry
hello, Monitoring logs recently i noticed this entry: Sep 18 18:19:57 DCRT kernel: [LOCAL-WAN-30-D]IN= OUT=eth0 src=xx.xx.xx.xx DST=184.105.139.123 LEN=576 TOS=0x00 PREC=0xC0 TTL=64 ID=46648 PROTO=ICMP...
View ArticleHelp on Policy Routing Dyndns via specific ISP
I'm new to EdgeOS, and have just replaced my home router with ER-X. I've 2 WANs, configured on failover mode, eth0 is static IP, eth1 is on pppoe and failover. Have setup dyndns with afarid.org I've...
View ArticleRe: EdgeOS 1.8 - Wheezy or Jessie?
I am new to EdgeOS but a longtime Debian and OpenWRT user. I just got the Edgerouter lite and installed v1.9. I want to install some packages that are not included, but it seems that Debian wheezy is...
View ArticleRe: Plex won't work on internal LAN. It can't connect to my local server. ERL...
Not sure it this will work but try options "rebind-domain-ok=plex.direct"Note the different syntax. According to the DNSMASQ doc, the /'s are only needed when the value has multiple domains.
View ArticleRe: EdgeOS 1.8 - Wheezy or Jessie?
Hey Mate, Late to the party. Yes they are still lollygagging on wheezy. You can install packages by adding the base wheezy repository to your config but be sure to leave the security repo URL out...
View ArticleRe: Strange FW log entry
TYPE 11 is Time Exceeded and CODE 1 for TYPE 11 is Fragment Reassembly Time Exceeded. From: The TCP/IP GuideThere is another “time expiration” situation where ICMP Time Exceeded messages are used. When...
View ArticleRe: Can't get VPN client access to work (both L2TP/IPSec and PPTP)
Some help with this please, anyone? And if you don't have the solution, maybe a pointer as to where to look, which logfiles to check or something?
View ArticleRe: EdgeOS 1.8 - Wheezy or Jessie?
Here's another example. The current stable curl build for wheezy LTS is 7.26.0-1+wheezy15 But the 1.9 package is: 7.26.0-1+wheezy13 The issues relate to client certs, so probably not a huge issue....
View ArticleRe: Poor Quality Video Streaming
SmartQueue tries to divide bandwidth over currently active network connections, so each gets its fair share.But a single user might have multiple connections (like windows update does) , effectively...
View Article