Re: Link status suddenly disabled, connections ok,strange problem
If you are talking about trouble with the GUI, there have been serveral threads in the last week or so that say there are problems with some browsers, particularly FireFox but some have also had...
View ArticleRe: EdgeRouter dashboard doesn't work with Safari
ER-POE and 1.9.0.Confirmed not to work. Must use Firefox instead.
View ArticleRe: ipv6 tunnel Hurricane Electric intermittent
Returning to this topic. I had a "brown paper bag" moment the other day when I realized that _maybe_ load balancing had something to do with my problems. So, to prove my case, I disconnected from the...
View ArticleRe: Guest wireless using ERLite-3 and DD-WRT AP
Bridging eth1 and eth2 on the ERL is a bad idea as bridging is done in software and has a big performance impact, typically limiting throughput to about 100 Mbps. It is better to plug switch 2 into a...
View ArticleHelp Opening and Verifying OpenVPN tunnel to ProXPN (ER-X)
Hello, Firstly I have taken the .ovpn file from the ProXPN windows client. It is listed as shown:client dev tun ; proto udp resolv-retry infinite nobind persist-key persist-tun cipher BF-CBC keysize...
View ArticleEdgeswitch16XG 12 SFPs and 4 1gb ports
Hi There,Im setting up a mikrotik CCR with SFP 10G connection to Edgeswitch SFP 10GB. The trunk port is up. I have setup a bridge port on the mikrotik with 2 vlans with DHCP and DHCP on the bridge...
View ArticleRoute display issue with v1.9.0
Hello, I noticed after upgrading my ER-POE to v1.9.0 that my default route (which is set via PPPoE) does not appear in the Routing section of the GUI. My other routes are all there - only the default...
View ArticleRe: Help Opening and Verifying OpenVPN tunnel to ProXPN (ER-X)
First, in the opvn file you included in your post, it includes a private RSA key that you have now made very public. That is a big no no as it is now effectively worthless as a private key. To see if...
View ArticleRe: Guest wireless using ERLite-3 and DD-WRT AP
Thanks karog. The performance degradation is what I'd understood would happen, but I wasn't sure if it would impact me because I have 15 Mpbs down, 1Mbps up. Does the slowdown happen from eth0 to the...
View ArticleRe: Guest wireless using ERLite-3 and DD-WRT AP
With your rates, it won't impact you on your WAN. I am not certain about between eth1 and eth2 but I think it might impact that as well. You can test with iperf3. I would get rid of the bridge...
View ArticleHardware Refresh of EdgeRouter Lite?
Good evening, I was wondering whether there are any plans regarding a HW refresh of the EdgeRouter Lite or any other of the 'end-user' / home models in regards to their CPU performance. I am wondering...
View ArticleClik here to view.
Re: Help Opening and Verifying OpenVPN tunnel to ProXPN (ER-X)
Thanks for the heads up on the RSA key. I always feel like I am forgetting to take certain things out of posts. As for the interface: I see it come up in the dashboard with an IP I have never...
View ArticleHelp getting OpenVPN (Client to PIA) to come up
I have used the following thread for help but it seems a bit old and im wondering if anything has changed with PIA setup or something within EdgeOS in the newer versions. Im just looking for a quick...
View ArticleRe: Help Opening and Verifying OpenVPN tunnel to ProXPN (ER-X)
You are the client on a routed (as opposed to bridged) OpenVPN tunnel so the server sets its own subnet and gives the client an ip address in that subnet. So if you got an ip address, that is good. Now...
View ArticleRe: Help Opening and Verifying OpenVPN tunnel to ProXPN (ER-X)
I get "Cannot find active OpenVPN client connections." I was also trying a source ping using:sudo /bin/ping/ -I vtun0 8.8.8.8 which resulted in nothing. I also tried a traceroute from the vtun0...
View ArticleClik here to view.
Re: Help getting OpenVPN (Client to PIA) to come up
Getting these messages in Log Monitor: Aug 28 16:17:01router openvpn[2560]: SIGUSR1[soft,tls-error] received, process restartingAug 28 16:17:01router openvpn[2560]: TLS Error: TLS handshake...
View ArticleRe: Help Opening and Verifying OpenVPN tunnel to ProXPN (ER-X)
Try dev vtun0 in your opvn rather than dev tun. That is a guess based on some googling. Be sure to restart openvpn after changing the config and use ps ax | grep openvpn to see the command that is...
View ArticleRe: Help Opening and Verifying OpenVPN tunnel to ProXPN (ER-X)
I was able to get replies back. I had my modify rule on the wrong interface. It was on switch0 instead of vtun0. Now onto making sure the traffic is on the right interface. Edit: This appears to only...
View ArticleRe: BGP SNMP OID
I did that first but it doesn't mention anything about BGP in the walk so I'm doubting if it even has BGP for SNMP.Which would really be unfortunate as part of using a router is being able to monitor...
View ArticleClik here to view.
Re: Can I protect 2 types of customers with this simple vlan idea ?
Both networks could be the same ip range as long as the a and b routers would be handing out/translating to unique ips... as a and b would not touch each other logicaly... so might have to go to POP...
View Article
