Re: Dual WAN Failover with OpenVPN Client
Ideally all traffic from local LAN 192.168.2.0/24
View ArticleRe: ERL / ERX / USG - transparent proxy / filtering / bandwidth shaping
Thank you for the info, on both topics - I figured the ERL would be a little limited somewhere past maybe 200Mbps with such features in place. It's still a fantastic little box, and I might...
View ArticleRe: ipv6 tunnel Hurricane Electric intermittent
load-balance and tunnels do require some extra care (search help.ubnt.com for wan load-balance for the KB). You might want to post your config file also.
View ArticleDisabled interfaces enables itself after some time
Hi, If i disable a port - let's say eth1 in the GUI - it seems that it enables itself after some time. It's still greyed out in the dashboard but i can see packets flowing in the TX/RX collumn. Is this...
View ArticleRe: Brand new Edgrouter Pro (ERPro‑8) Very slow WAN performance
Can you please post your config file.
View ArticleRe: ERL / ERX / USG - transparent proxy / filtering / bandwidth shaping
For USG question you probably should ask on the USG forum.
View ArticleRe: Dual WAN Failover with OpenVPN Client
You need policy-based routing, please refer to this
View ArticleRe: Help getting OpenVPN (Client to PIA) to come up
Why is the port for aes-128-cbc different than the ovpn config that PIA gives me which is 1194 not 1198?
View ArticleRe: Troubleshooting VLAN over load balancing
Try set firewall in modify balance under vif 30
View ArticleRe: Unique DHCP setup
Tried the setup above. My DHCP stopped working. Any ideas? I created a second DHCP to get things moving again, and it works withouth any issues. The only think I have not tried yet, is to...
View ArticleRe: WAN Failure notification
The transition script is callled for every interface in the load-balance group.
View ArticleEdgeRouter PoE - Multiple WAN IPs Port Forwarding
Hey Gang, I have been running this OS as a nubie for about a year. I have learned a lot but cant seem to bust through this one. I havemultiple static WANip addresses. I want to split traffic INCOMING...
View ArticleRe: WAN Failure notification
That makes sense. Any ideas on why $status is returning as $status?
View ArticleRe: WAN Failure notification
Single quote means the variables aren't seen as variables.
View ArticleClik here to view.
Re: Brand new Edgrouter Pro (ERPro‑8) Very slow WAN performance
Here you go, forgive my pushyness. Just anxious like a kid who's new christmas toy isn't working
View ArticleRe: How to repeatedly crash an ERX
It would be worth making sure this isn't an iperf bug. The version of iperf3 included with EdgeOS is rather old. 3.1.3 is the most current, while 3.0.11 or 3.0.12 is the latest from the 3.0 branch.
View Article1.9.0 DPI Problem
Two separate ER-X routers at different locations both have an issue with DPI after about 2 weeks of service. They start moving services (streaming/media) into web/other. A reboot will correct...
View ArticleRe: How to repeatedly crash an ERX
Wasn't running iperf3 on the ERX's. Was running the latest version on the Linux boxes on each end. The bi-directional iperf3 traffic was just flowing through the ERXs
View ArticleRe: Brand new Edgrouter Pro (ERPro‑8) Very slow WAN performance
Nothing obvous in the config file which makes me wonder if the interfaces is autonegotiating to 100Mb instead of 1Gb. Could you do a "show interfaces ethernet physical" to see if the autonegotiation...
View ArticleRe: Brand new Edgrouter Pro (ERPro‑8) Very slow WAN performance
Settings for eth0: Auto-negotiation: on Speed: 1000Mb/s...
View Article
