Re: ER-X and multiple webserver setup
Be aware that http vs https will distinguish the servers rather than the domain names. So, both http://results.domain.com and http://demo.domain.com will go to the server at 10.1.10.39 and...
View ArticleClik here to view.
Re: 192.168.1.1/23 not allowed?
I need to get myself an Routing for hardheads book. which is the other router? got lost there. I appreciate the patience.
View ArticleRe: IPSec tunnels with main site prefix overlapping remote site networks no...
Could you post the config file for both the main site and a remote site. I'm trying to reproduce this in the lab and haven't even been able to get it to work with v1.7.0.
View ArticleRe: ERL was fast but not is very slow - Centurylink says its my issue
That almost looks like a duplex issue ... try setting rach side to gig / hdx (it'll make things a bit of a mess, but for testing it should be okay)
View ArticleLoad-Balance with Zone-Policy
Hello I bought a Edgerouter X one week ago, EdgeOS is amazing plataform. But I´m having problem to configurate load-balance with zone-policy together. I got make a config to work load-balance with 2...
View ArticleRe: Question: How can I improve this ER-5 setup?
Ok, great. The admin interface on http://192.168.2.1 is now working, so it all seems good. Guess I just needed to wait for everything to "settle down". And, for those interested, the FaceTime issues...
View ArticleRe: ERL was fast but not is very slow - Centurylink says its my issue
I also thought the same. I'll hard set it.
View ArticleRe: If PBR routing table has many default routes
alex2h wrote: ... The problem is that when required interface becomes connected the appropriate default route is not coming up. The command "show ip route table 110" shows nothing. ...Have you tried...
View ArticleRe: ERL was fast but not is very slow - Centurylink says its my issue
That almost looks like a duplex issue ... try setting rach side to gig / hdx (it'll make things a bit of a mess, but for testing it should be okay) Now getting about 600Mbps each direction. We are...
View ArticleRe: Simple way to point traffic to specific WAN port with VLANs and OpenVPN?
https://help.ubnt.com/hc/en-us/articles/204952274-EdgeMAX-Policy-based-routing-source-address-based-http://www.forshee.me/2016/03/04/ubiquiti-edgerouter-lite-setup-part-3-vlan-setup.html
View ArticleRe: Access internet or Azure VM using T2TP VPN client
hmuralt wrote: ...Current situation:The l2tp clients can successfully establish a VPN connection and access the office local network. So far so good. But accessing the internet through the VPN...
View ArticleRe: Setting up EdgeRouter POE-5 with Comcast 5 static IPs
I went to the system tab on the GUI, and entered the WAN address into GUI. It works. Including the config.boot below. What do I add so that traffic coming into 50.76.130.125 gets routed to...
View ArticleRe: Setting up EdgeRouter POE-5 with Comcast 5 static IPs
kalee wrote:What do I add so that traffic coming into 50.76.130.125 gets routed to 192.168.2.70 on my local network? Another option is to simply be able to see 50.76.130.125 on my local network, as...
View ArticleRe: Adjusting interface restrictions on DNS server?
This achieves exactly what I was looking for! Thanks!
View ArticleRe: Help turning VLANs into true "silos?"
Nice! Glad to see you got your VLANS and Firewall rules worked out. Have fun!
View ArticleRe: Do you need Static IPs for Dual-WAN Failover? / Can't get failover working
I figured out what the issue was. I was missing the following modify rule in the firewall. I also added the "firewall in modify balance" rule to the LAN interfaces. Am I supposed to add that to all...
View ArticleRe: Site-to-Site VPN between EdgeRouter Pro 8 and Cisco ASA 5510
Unfortunately still no luck. I confirmed the following, where "auto-firewall-nat-exclude" is enabled: vpn { ipsec {...
View ArticleFiberPoE Help
Hello, I've just purchased a FiberPoE and SFP module and I have started doing some testing on the bench, but I'm having some issues getting the unit working how I envisaged. Essentially I want to use...
View Article