Clik here to view.
Clik here to view.
Re: Debian Repo down?
I got mine to work. I manually downloaded an updated apt package from here: https://packages.debian.org/wheezy/mipsel/apt/download I transferred the file into my ERX with SCP, then saw that ruh rowh,...
View ArticleClik here to view.
Offloading causing RDP issues
Hello, So the tl:dr is that RDP connections to a termial server were constantly disconnecting/reconnecting and I believe it happened due to offloading. From what I can tell as soon as I run;set system...
View ArticleRe: ERL was fast but not is very slow - Centurylink says its my issue
I lowered the clamp to 1412 from 1452. No change
View ArticleRe: CLI Integrated dnsmasq Adblocking & Blacklisting v3.5.5 Easy Config
Got any ideas for getting cbs.com streaming to work without having to remove doubleclick.net from domains include? Something like ublocks allowing something in a certain domain. So being able to set...
View ArticleClik here to view.
Re: Offloading causing RDP issues
I moved to 1.8.5 at Site1 (the site with the problem with offloading) and it appears RDP now is working with offloading enabled.
View ArticleRe: routing based on switch port - is that possible?
Your mangle test results are within my expectations:The ethx ports are Layer2 ports, the switch0 port , having the IP address, is layer3 port. Maybe this is an alternative: create DHCP reservations...
View ArticleRe: PPTP server setup - access to router web GUI is ok, but no access to...
afaik , pptp does not push route(s) to the client. It just uses classfull routing based on IP address given.For a 192.168.x.x , the client only sends /24 through the tunnelFor a 10.x.x.x. address,...
View ArticleRe: Adjusting interface restrictions on DNS server?
My first shot would be be trying to get DNS requests from the VPN client to ER LAN interface working. Did you try that already?
View ArticleRe: Offloading causing RDP issues
jgould wrote: ... Site2's ERL has v1.7.0....Offload packet corruption was known issue and it was fixed in 1.8.5.See release notes: ...[Offload] Fix possible "download corruption" issue triggered by...
View ArticleRe: PPTP server setup - access to router web GUI is ok, but no access to...
, thanks for the reply, the checbox "use GW on remote network" is checked on the Windows remote connection. It seems all good. I have the list of routes on the Windows PC before and after the...
View ArticleRe: Edge Router Pro as endpoint for a dark fibre
Hello, thank you for the input.I have checked the link before but the 40km optic is not listed there. Looks like I have to wait until the fiber is completed and then test if the optic I got is working....
View ArticleRe: Edge Router Pro as endpoint for a dark fibre
I think it can work well as long as it is compatible with your edge router, because it is the same with this one I used before. http://www.fs.com/products/29854.html
View ArticleRe: Edge Router Pro as endpoint for a dark fibre
Hi, oh that looks good. I can reconfigure the optic so it will behave like a Juniper SFP. Thank you for your input. -- Alex
View ArticleDo you need Static IPs for Dual-WAN Failover? / Can't get failover working
Do you need to have static IP addresses for Dual-WAN Failover? Or just for Dual-WAN Load Balancing? I have two WAN connections from two different ISPs and I want to set up one as a backup (failover)...
View ArticleRe: Unable to get Internet on ETH1. New setup
NotSoAlien wrote:Guys I just wanted to say thanks again! I am up and running, had the two issues (DNS issues, Switch issues) which are now both fixed! Thanks so much for the help with the DNS issue I...
View ArticleRe: subnet isolation
It may just be easier to enter 's CLI commands one by one followed by a commit and save.configure set firewall name PROTECT_LAN default-action accept set firewall name PROTECT_LAN rule 1 action drop...
View ArticleRe: Do you need Static IPs for Dual-WAN Failover? / Can't get failover working
Load balance will work fine on 2 DHCP connections. Add below , so load balance uses fixed remote IP to test connectivity, instead of relying on DNSconfigure set load-balance group G interface eth0...
View Article