ERL & L2TP client (no ipsec)
As I understand it, it should be possible to get a l2tp client running without ipsec, even if it means hacking the system about a bit to do it, since it's not currently supported in the cli. Does...
View ArticleClik here to view.
Re: Steps after the first step
If you decided to add Unifi APs I would recommend skipping the Pro model, unless you have cash to burn. It is a great AP, I use them frequently, but generally prefer to use a UAP-AC-LR if only using a...
View ArticleSending Traffic for external address to local host
I am trying to route traffic from a small dedicated appliance to a raspberry Pi internally on my network. I have an EdgeRouter X v1.8.5. I can't modify the appliance but I can intercept its packets...
View ArticleERL Dropping DHCP Assigned IP
Hello, I seem to be having an issues with my ERL dropping the IP address my ISP assigned. I have narrowed it down to one firewall rule for dropping bogon networks. I also noticed that after typing my...
View ArticleRe: ER-Lite, VPN and browsing the local network.
Hi James, I did look over your config but didn't see anything suspisious. Would you be able to modify your original post using the 'Insert Code' for your config. Just having a bit of trouble reading it...
View ArticleRe: ER-Lite, VPN and browsing the local network.
Just edited my original post to make the config more readable (hopefully)!
View ArticleRe: ER-Lite, VPN and browsing the local network.
Thanks James! Try explicitly definining the network you'd like to allow. Also specify the external ip and the next hop it should take to access your internal network. See the lines with ">". Let me...
View Articlefq_codel on, still have huge latency spikes
I'm running 1.8.5 on an ERL for my home network connecting to DSL which is supposedly 6m down, 768k up. Seems more like 5m down, 640k or less up in practice, but whatever. Common usage at the house...
View ArticleRe: fq_codel on, still have huge latency spikes
With QoS disabled, perform upload speed test. Preferred is a test that not only presents a averaged upload number, but also some chart showing fluctuations in time. Ideally , this should be flat...
View ArticleRe: New to the EdgeRouter family, putting the ER-X through it's paces
I think I may have found the issue; too much aggressive logging of firewall rules + squid makes the little box overloaded. No crashes yet with logging disabled on the most chatty rules. However,...
View ArticleRe: ERL Dropping DHCP Assigned IP
Just enable logging on bogons rule on WAN_LOCAL and review log output to see what packets got intercepted. (DHCP might involve 255.255.255.255 address, blocked by last bogon rule)
View ArticleRe: Sending Traffic for external address to local host
hairpin to the rescue.You already made a dNAT rule , replacing destination TCP 5.5.5.5:80 into local IP:80.It needs to be accompanied by a sNAT hairpin rule (assuming internal server =...
View ArticleRe: ERX linespeed performance with Hardware offloading
MT7621A (ER-X SoC) not include DPI block - so it can't be hardware accelerated.In MT7621 packets handled by CPU or HW_NAT block.HW_NAT can offload NAT for IPoE/PPPoE, TCP/UDP checksums, TSO, GRO, VLAN...
View ArticleRe: VPN On Second Router
A general advice when dealing with VPN: You should not use a common subnet like 192.168.1.0/24. This is probably the most used subnet in the world. As soon as you want to connect to your home VPN from...
View ArticleER-X SPF questions about SFP port
HiIthinkbuying anER-XSFPbutit can runLAN onSFPportand not justWANI have a24ESLiteand will useSFPto linkthem togetherif possible /Flemming
View ArticleRe: ER-X SPF questions about SFP port
Yes, the ER-X SFP is 100% flexible on what each port does. I've mainly use the SFP for LAN but also as WAN. There is also a high speed switch which the SFP can be part of.
View ArticleRe: Tunnel on dynamic WAN IP route all traffic through tunnel
dpurgert wrote:Yeah, you can create site to site VPNs with a pair of ERs (or an ER and some other router, if you don't have an ER at site A) Yes I know that. Maybe I haven't been clear enough. Can you...
View ArticleRe: ER-X SPF questions about SFP port
Okay thanks for the responseI had hoped forI'll just find out the cheapestSFP modules in Europe are there some whohave some suggestions /flemming
View ArticleRe: powering EdgePoint
Hello I have seen the Edge Point S16 only 24V and 54V can .Now I wanted to put my R5 Ti to the S16 but I lack the 48V ?How can I solving ?Can I infect R5 Ti with 54V and use ?
View ArticleRe: ER-X SPF questions about SFP port
For SFP+ (10Gbit) most cheapest solution to connect 2 device is DAC (direct attach cable) - from 10$.But can't find such solution for SFP.
View Article
