Re: Gigapower + EdgeRouter X + UniFi AP AC Lite : Speed issue
And can you make sure your connected on 5g instead of 2.4
View ArticleRe: Gigapower + EdgeRouter X + UniFi AP AC Lite : Speed issue
Default settings on the AP's, yes 5 Ghz. Channel 2 on the B , 20 dBm. Channel 157, +1 same 20 dBm. I have about 15 devices, and they are evenly connected between the two AP's.
View ArticleRe: Gigapower + EdgeRouter X + UniFi AP AC Lite : Speed issue
download a wifi analizer on your phone and check for the best channel available and switch the ap to non overlapping channels with the least interference. Then either A. drop the power to both bands...
View ArticleRe: Gigapower + EdgeRouter X + UniFi AP AC Lite : Speed issue
I performed a RF Scan from within the UniFi AP interface, and the channels seem to be free/unused. I removed the EdgeRouter and connected the AP's directly to the Pace router, now I get slightly...
View ArticleSimple question
If you upload a backup configuration, and realize it is the wrong one, how do you deleted so it doesn't take over?
View ArticleRe: Edgerouter Lite and Uverse Gigapower slow speed- newbie
jacobturner wrote:Your config looks fine for more throughput than you are seeing. I wonder if it is an MTU issue? Try lowering your "WAN" mtu on the ERL or using the MSS clamping wizard.tried to...
View ArticleClik here to view.
Help Building a City Wide VPN
So normally , clients would connect to the VPN like this: but what i want is : Why I want this ?- Because NIC1 is a city wide intranet connection . There is no internet .Hence to access websites, NIC2...
View ArticleRe: Help with two separate WiFi networks behind EdgeRouter X
- I currently have the following routers I'm trying to get this setup to work with, and the ports I intend to connect them to when all is said and done: Netgear Nighthawk R7000 (eth1) - This is the...
View ArticleRe: EdgeRouter X WAN+2LAN2 slow LAN speed
Thanks for your reply! You can see config.boot attached. Network in front of ERX is:1. Nano M5 to eth0 of ERX.2. Nano M5 to some cheap wifi router on my friend's side. Internet works at speed 20-25...
View ArticleClik here to view.
Re: Help with two separate WiFi networks behind EdgeRouter X
Based on the suggestions by I decided to reset everything and start over. This is my configuration file: firewall { all-ping enable broadcast-ping disable ipv6-receive-redirects disable ipv6-src-route...
View ArticleClik here to view.
Re: Help with two separate WiFi networks behind EdgeRouter X
And ... I've lost internet connectivity. Haven't changed anything, other than going in to change the default SSID and set up the security for it. Looking at the connection information Windows 10 is...
View ArticleRe: EdgeRouter X WAN+2LAN2 slow LAN speed
Could you try to upgrade to 1.9.1 ? Is the ER-X SFP ? If you have the NS's PoE injector, you may even try disablng the PoE on the ER's eth0 and power up the NS with its PoE.
View ArticleRe: Help with two separate WiFi networks behind EdgeRouter X
First, is flat wrong about being able to get an ip address from the ERX. You can as and I stated above.Second, I noticed that for LAN-eth1 you have the pool start at 192.168.1.2 which conflicts with...
View ArticleRe: Simple question
Yep, but if you just uploaded a backup of it, you should already have it saved somewhere.Of course I may not be fully understanding what you're going for here, you may want to rephrase your question.
View ArticleRe: Help with two separate WiFi networks behind EdgeRouter X
What ip address do you get on you computer when connected to a wired port ?Is the wire from the edgerouter to the WRT-54G plugged in to the WAN port ?
View ArticleRe: Help Building a City Wide VPN
I'm not sure I am understanding, what you have illustrated is the standard VPN layout if you routed all traffic through the VPN. If your looking for a interface that represents your VPN then use ipsec...
View ArticleER3 IPTV lagging so much !
Hi everybodyHere is my Internet setup: Internet ----> ER3 WAN (PPPOE eth0) -----> ER3 eth1 DHCP ---> Unmanaged TPlink 24 ports 1gbs switch ---> My PC and 3 Set top box. Im a newbie here...
View ArticleRe: OpenVPN and IPv6 Tunnel
That sounds reasonsable, I haven't thought of that.I guess I do not need a second /64 net, private addresses should also work, or? I tried the following now: openvpn vtun0 { description "OpenVPN...
View ArticleRe: EdgeRouter X WAN+2LAN2 slow LAN speed
sounds almost like he's traversing the M5 link to his "friends house" to get to something over there ... You don't happen to have IP address collisions do you?
View Article