Re: Help with two separate WiFi networks behind EdgeRouter X

Based on the suggestions by  I decided to reset everything and start over.

This is my configuration file:

firewall {
    all-ping enable
    broadcast-ping disable
    ipv6-receive-redirects disable
    ipv6-src-route disable
    ip-src-route disable
    log-martians enable
    name WAN_IN {
        default-action drop
        description "packets from Internet to LAN & WLAN"
        enable-default-log
        rule 1 {
            action accept
            description "allow established sessions"
            log disable
            protocol all
            state {
                established enable
                invalid disable
                new disable
                related enable
            }
        }
        rule 2 {
            action drop
            description "drop invalid state"
            log disable
            protocol all
            state {
                established disable
                invalid enable
                new disable
                related disable
            }
        }
    }
    name WAN_LOCAL {
        default-action drop
        description "packets from Internet to the router"
        enable-default-log
        rule 1 {
            action accept
            description "allow established session to the router"
            log disable
            protocol all
            state {
                established enable
                invalid disable
                new disable
                related enable
            }
        }
        rule 2 {
            action drop
            description "drop invalid state"
            log enable
            protocol all
            state {
                established disable
                invalid enable
                new disable
                related disable
            }
        }
    }
    receive-redirects disable
    send-redirects enable
    source-validation disable
    syn-cookies enable
}
interfaces {
    ethernet eth0 {
        address dhcp
        description WAN
        firewall {
            in {
                name WAN_IN
            }
            local {
                name WAN_LOCAL
            }
        }
    }
    ethernet eth1 {
        address 192.168.1.1/24
        description LAN-eth1
    }
    ethernet eth2 {
        address 192.168.2.1/24
        description LAN-eth2
    }
    loopback lo {
    }
}
service {
    dhcp-server {
        disabled false
        shared-network-name LAN-eth1 {
            authoritative disable
            subnet 192.168.1.0/24 {
                default-router 192.168.1.1
                dns-server 192.168.1.1
                lease 86400
                start 192.168.1.2 {
                    stop 192.168.1.254
                }
            }
        }
        shared-network-name LAN-eth2 {
            authoritative disable
            subnet 192.168.2.0/24 {
                lease 86400
                start 192.168.2.100 {
                    stop 192.168.2.150
                }
            }
        }
    }
    dns {
        forwarding {
            cache-size 150
            listen-on eth1
            listen-on eth2
        }
    }
    gui {
        https-port 443
    }
    nat {
        rule 5000 {
            description "masquerade for WAN"
            log disable
            outbound-interface eth0
            type masquerade
        }
    }
    ssh {
        port 22
        protocol-version v2
    }
}
system {
    host-name ubnt
    login {
        user ubnt {
            authentication {
                encrypted-password $1$zKNoUbAo$gomzUbYvgyUMcD436Wo66.
            }
            level admin
        }
    }
    ntp {
        server 0.ubnt.pool.ntp.org {
        }
        server 1.ubnt.pool.ntp.org {
        }
        server 2.ubnt.pool.ntp.org {
        }
        server 3.ubnt.pool.ntp.org {
        }
    }
    syslog {
        global {
            facility all {
                level notice
            }
            facility protocols {
                level debug
            }
        }
    }
    time-zone America/New_York
}


/* Warning: Do not remove the following line. */
/* === vyatta-config-version: "config-management@1:dhcp-relay@1:dhcp-server@4:firewall@4:ipsec@3:nat@3:qos@1:quagga@2:system@4:ubnt-pptp@1:vrrp@1:webgui@1:webproxy@1:zone-policy@1" === */
/* Release version: v1.0.2.4507738.121107.1250 */

Even though the WRT-54G is intended to be on eth2 in the end, it is currently connected to eth1.  I have now set up the router like so:

Basic Setup

I assume they are because everything seems to be working, but are the Gateway and DNS addresses correct?

Advanced Routing

With this setup, I *am* able to connect to the internet when I am on WiFi, letting the router give me an address.  However, if I use a network cable, I cannot get on the internet but I can get into the router settings.  Another thing that's odd is that Windows is telling me the IP address of the laptop when connected via WiFi is not in the 192.168.20.X range as I would expect, but rather 192.168.1.X:

Wireless LAN adapter Wi-Fi:

   Connection-specific DNS Suffix  . :
   Link-local IPv6 Address . . . . . : fe80::4a8:915d:b851:f967%2
   IPv4 Address. . . . . . . . . . . : 192.168.1.2
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1