boot-config-loader removes SNMP config
Device rebooted, compare shows `service snmp` is missing thanks to root by boot-config-loader erlite-3 v1.9.1.4939093.161214.0705
View ArticleRe: EdgeRouter X WAN+2LAN2 slow LAN speed
Thought the same thing, but the system gateway address on the ER is 192.168.0.1, so I'd assume that the next network is 192.168.0.0/24 .... (Even if, on the wan side, I'd set a fixed ip address, rather...
View ArticleRe: EdgeRouter X WAN+2LAN2 slow LAN speed
I'd prefer to have other nerwork 192.168.1.0/24
View ArticleRe: EdgeRouter X WAN+2LAN2 slow LAN speed
192.168.1.0/24 is your network, but your friend's network (the wan for your ER) seems 192.168.0.0 ... correct ?
View ArticleClik here to view.
Re: Norwegian Altibox - ER-X-SFP - can't seem to get internet connection thru...
Where are you located? I'm pretty sure Altibox is on TX 1310 / RX 1550 where I live. (Bergen). It's a good idea to open up the media converter and check the numbers before ordering the SFP.Did you get...
View ArticleRe: Help with two separate WiFi networks behind EdgeRouter X
From there as long as you have the edge router set up correctly and you don't plug anything into the WAN ports of the WRT and r7000 everything will just work. The edge router will give the access...
View ArticleRe: Enable Remote SSH access to an Ubuntu VM
Bridging eth1 and eth2 is to be able to keep the same 192.168.1.* scheme. Is that bad practice?
View ArticleRe: Enable Remote SSH access to an Ubuntu VM
Fausty0 wrote:Bridging eth1 and eth2 is to be able to keep the same 192.168.1.* scheme. Is that bad practice?Yes, but for what your using it for it will be fine.
View ArticleRe: Enable Remote SSH access to an Ubuntu VM
It appears that your three VMs on the same machine. I can't see how this can work, because all the VMs would be reached via the same router port.
View ArticleRe: Configure internet adapter
kjmck thank you so much, this is exactly the kind of step-by-step guide I'm looking for. Too late to do it tonight but will try it sometime this week and report back. Thanks again.
View ArticleRe: Configure internet adapter
Also, after you run the WAN+2LAN2 wizard and plug in to a port besides eth0, be sure to re-set your network adapter to get DNS and address information automatically. the EdgeRouter line is not targeted...
View ArticleRe: Disable iPv6 DNS servers
Post your config? or at least the service dns forwarding, service dhcp-server, and system parts.
View ArticleHaProxy transparent TCP configuration - tproxy support?
So, I've had my EdgeRouter X for a week or so now and I decided I was going to see if I could get HaProxy working as a transparent TCP proxy. I seem to be having trouble however, and I'm not sure if...
View ArticleBasic QoS questions: Differences in QoS options and rationale for shaping...
So I recently purchased the EdgeRouter Lite and am extremely pleased with its throughput and configurability. I haven't yet set up the QoS. To be honest, it's a bit confusing. In the interface,...
View ArticleRe: Basic QoS questions: Differences in QoS options and rationale for shaping...
There's more then 3 via CLI. But as far as the difference that is best left to the vyatta documentation. Look at the 6.3 and 6.5 vyatta documentation.
View ArticleSubsystem Configuration Persistent after upgrades
Is it possible to modify a susbsystem configuration (e.g. sshd) and have that change persist through updates?
View ArticleRe: Help with two separate WiFi networks behind EdgeRouter X
goldlineIT wrote:From there as long as you have the edge router set up correctly and you don't plug anything into the WAN ports of the WRT and r7000 everything will just work. The edge router will give...
View ArticleRe: Help with L2TP over IPSEC VPN - server did not respond?
Hi mate, Not too sure if you're having issues with the VPN on the 4G now however I came across this topic via Googling IPSEC & Dovado. Please note that IPSEC support on the Dovado will be limited...
View Article
