Re: Load-balance wizard 5 WAN PPPoE EdgeRouter Pro 8
I changed my config to do the PPPoE on the egde router and not work with the dynamic IPs of the ISP. I had problems with that config.I will try it again with the 5 WAN setup just to see how it goes.
View ArticleRe: Compound NAT solution?
I think the VLAN's were a good start. I just don't see how 1 device could do all of them, but there is a lot of people with more knowledge and experience then me on these forums so I'm sure you'll get...
View ArticleRe: Advice needed
If you have the USW-24-250W then passive POE might not be much of a selling point. I would stick with the ERX myself, assuming the switch is in a nice central location.
View ArticleClik here to view.
Re: Compound NAT solution?
Since ER isn't VRF aware (yet...) you can't do this on a single device. You need multiple seperate interfaces each having 10.100.4.201 address. With VRF, you can partition a router sort of like you...
View ArticleRe: L2TP VPN + NAT hairpin
You're already outside, the webserver is pulished on the internet....so why first go through the VPN?On L2TP client, disable "use gateway on remote network" , now VPN is only used for traffic...
View ArticleRe: Compound NAT solution?
Option 1: 8xER-X dedicated for each UUT, no need for the switch or VLANs... setup in about an hourOption 2:1xER-X with 8 VLANs set up for each of the 10.100.4.200's, via the ES-48. You would then do a...
View ArticleRe: Compound NAT solution?
Yes, I am hoping someone is around that knows more about configuring NAT than I do. Is it possible to have a single router do multiple NAT translations (for the different VLANs) but for the same IP...
View ArticleRe: Tab completion bug in vbash
Thanks aebooth37.It was intended more as bug report.I think you are right about the space. My experience is that scripts are often written without spaces in mind unfortunately.
View ArticleRe: Will This VPN Setup Work?
A single openvpn server allows multiple VPN clients. Assign each VPN client with a fixed IP address (ie the address on vtun) , so each remote site has dedicated vtun address. Routing protocol like...
View ArticleRe: Compound NAT solution?
Thanks for the responses, guys! 16again, I didn't realize until your comment that what I drew looks exactly like an IC interconnect, lol. I thought I was just drawing a block diagram... I am not...
View ArticleRe: WAN_LOCAL DROP Packets - I dont understand why the SRC IP is showing my...
Sorry I'm a network newb what do you mean by this?<quote>UDP10001 is ubiquity discovery protocol, might be from router itself.</quote><quote>Are the other 255.255.255.255 destination...
View ArticleRe: Compound NAT solution?
By Everything do you mean the computer and the 3 uut ports? yes it would.
View ArticleRe: Will This VPN Setup Work?
TeamViewer is going to be a better approach; I think it can do everything you need in the paid version.The OpenVPN will max out at 10Mb or so, but if that works it shouldn't be a barrier. I think you...
View ArticleRe: L2TP VPN + NAT hairpin
Generally speaking my dev sites aren't publically accessible unless I want them to be. So when I'm working away from home I use the VPN to go in and do stuff, be able to view them etc etc. I also have...
View ArticleER-X WAN disconnects
I'm new to EdgeRouter X. Here's my basic setup: FiOS ONT connected to LAN port on 24V 0.5A POE adapter (as provided with UAP-AC-LR).ER-X eth0 connected to POE port on 24V 0.5A POE adapter (as provided...
View ArticleRe: VLANs on a Managed Switch, just want to make sure I have this correct?
http://networkengineering.stackexchange.com/questions/6483/why-and-how-are-ethernet-vlans-tagged Don't connect end devices (computers, media streamers, etc.) to tagged ports. Use a tagged port to...
View ArticleRe: VLANs on a Managed Switch, just want to make sure I have this correct?
tocirahl wrote: Port 1 is the uplinkPort 2 is the APPorts 3 - 6 are wired devices I want on the untagged VLANPort 7 is a wired device on VLAN 2Port 8 is a wired device on VLAN 3 VLAN 1: Ports 1 - 6...
View ArticleRe: VLANs on a Managed Switch, just want to make sure I have this correct?
How are you getting 8 ports from a ER-L?
View ArticleRe: ERX as a second firewall and DPI.
Sorry to bump this thread, but i found it interesting.Could you ad firewall rules and drop traffic to block the categories from a particular IP?
View ArticleRe: VLANs on a Managed Switch, just want to make sure I have this correct?
goldlineIT wrote:How are you getting 8 ports from a ER-L?tocirahl wrote:then I have that running to a 8-port NetGear Managed Switch
View Article
