Re: Commit failed when setting up firewall
After the wizard, you might want to create a firewall group for WAN-Deny, and add all the cameras to that group; only access them via VPN. You create a firewall rule to block WAN-Deny to 0.0.0.0, and a...
View ArticleClik here to view.
Re: Unable to go from 1.8.0 to 1.9.1 (and 1.9.0)
I've been using various edgerouters since before there was even beta hardware released There are no other images on the system besides the 1.9.0 release. I had to clean all of the others just to go...
View ArticleWhat are people's thoughts on edgeRouter with Verizon modem (internet only)
Hello all, I'm just curious seeing that I selected verizon service for my new place. I'm suspecting that the ONT will use Coax, considering that's what's configured on the floors above. I'm wondering...
View ArticleRe: EDGEMAX / Verizon FIOS help
I've heard getting these things into bridge mode is a total pain ... considering I'm thhinking of doing this ...
View ArticleRe: Unable to go from 1.8.0 to 1.9.1 (and 1.9.0)
I'm seeing the same thing, no other image on the system, download is fine, but the upgrade fails from both the cli and the web interface.
View ArticleClik here to view.
Re: Unable to go from 1.8.0 to 1.9.1 (and 1.9.0)
esseph wrote:@BranoB I've been using various edgerouters since before there was even beta hardware released OK. So post some evidence. Let's see where the space on your system is used? Just...
View ArticleClik here to view.
Re: What are people's thoughts on edgeRouter with Verizon modem (internet only)
Hello Cambridgeport90, I did this a while back for a few years on FIOS. I had them switch the internet over to the ethernet port on the ONT (instead of MOCA). Just used the coax for CATV. I vaguely...
View ArticleClik here to view.
Network layout help needed. VLANS?
Not sure if this is the most appropriate place for this, but I use a few different Ubiquiti products to make it all work. Currently I have 2 farm sites with internet at the house and computer in the...
View ArticleSpecific Domain Access Restrictions
I am using edgerouter POE (EdgeRouter PoE v1.9.1alpha2)There are multiple domains connected to a single public IPFor example, to connect to a server using ssh or RDP, you can use aaa.com as a specific...
View ArticleRe: EDGEMAX / Verizon FIOS help
The ONT or the router? I have an Ethernet cable from my ONT to my Edgerouter and I don't have a Verizon supplied router.If you're doing this, read the FIOS FAQ over at dslreports. It'll break it all...
View ArticleRe: What are people's thoughts on edgeRouter with Verizon modem (internet only)
I replied to your other post, but again, I would read the dslreports FAQ first.Are you going to have their TV or phone service? If so, you give up some things by not having the Verizon router in place...
View ArticleRe: Wan address within the local network
I checked that I have hairpin nat enabled although I do see that 1.9 broke hairpin nat
View ArticleRe: isis support
The last post on this was almost a year ago. ISIS is the default backbone routing protocol we have used for 15+ years with BGP for all routes. Convergence time is nearly instant and we only carry...
View ArticleRe: Settings for 1Gbps Ftth
I did update that, but I could only do it for IVP4 I thinkHow do I get my setup to show what I have and don't have?
View ArticleRe: Settings for 1Gbps Ftth
I had similar issues. Remove any of the following you may have setup:BridgeQoSDPITaking those three off got me back to decent speeds with removing the Bridge being the biggest factor.
View ArticleRe: Settings for 1Gbps Ftth
No bridging is going on... In fact I have Eth2 shut off all together.Nothing in QoSAnd I didn't touch anything for DPI
View ArticleRe: Settings for 1Gbps Ftth
I just checked... and I don't have DPI on... it's set as Disabled
View ArticleRe: Wan address within the local network
bennuss wrote:I checked that I have hairpin nat enabled although I do see that 1.9 broke hairpin natIt worked perfectly for me since the early 1.9 alphas and is working now on 1.9.1. I use this feature...
View ArticleRe: Requests/suggestions for new hardware models
jabettan wrote:Any chance there can be a refresh of the ES-24 line?Same everything except either change the SFP ports to SFP+ or add 2x SFP+ ports.Heck, it would be fine if you could just change one to...
View ArticleRe: Requests/suggestions for new hardware models
+1 on both of those SFP+ is fast becoming the norm.
View Article
