Re: Edgerouter ER-4 multiple LAN and GUI issues
I was also initially concerned about heat, but the unit was in a well ventilated area and was never hot to the touch. Considering the GUI would fail after a few minutes after powering back on, and...
View ArticleERX-ERX: Site to site VPN w/ dynamic DNS not working
Hi, Used the GUI to configure, following the guide here: https://help.ubnt.com/hc/en-us/articles/115011373628 Site A:Firewall: Automatically open firewall and exclude from NAT peer: B.afraid.org...
View ArticleRe: Authentication Failure When Connecting to NordVPN
ip r a t 220 192.168.1.0/24 dev switch0The above command allows me to maintain access; however, Internet access is not secured. The web gui is very sluggish and barely functions but cli is responsive.I...
View ArticleRe: IPv6
IPv6 provides other technical benefits in addition to a larger addressing space. In particular, it permits hierarchical address allocation methods that facilitate route aggregation across the Internet,...
View ArticleEdgerouter 4 OpenVPN configuration removed after firmware update.
I noticed everytime I do a firmware upgrade on this router the OpenVPN configuration that I setup is gone. The routes/firewall rules everything. I try to restore a backup of my config and it doesn't...
View ArticleRe: IPv6
- you do realize you replied to and resurected an almost five-year old thread, with a response that has nothing to do with the issue in the thread, and is for a very old EdgeOS release that is many...
View ArticleRe: ER6P Firmware Version 1.10.5 FAILS eth4 - help
The Switch configuration ability is not in the ERX router data sheet either. Is this a hardware or software change. Where is this change documented?The ER6P config tree shows a switch option but all...
View ArticleRe: Recommendation(s) on symmetric gigabit WAN setup using EdgeRouter model(s)
Traffic on the same subnet would never leave the switch and would never even be seen by the router. The link between the router and the switch does not come into play for traffic between devices on...
View ArticleRe: Edgerouter 4 OpenVPN configuration removed after firmware update.
If you are referencing files in your config, they should be placed in /config folder hierarchyThen config should survive firmware upgrade. Interface and routes might disappear, are the firewall rules...
View ArticleSFP SC modules
HiDoes SFP SC modules with Ubiquiti routers work?My provider can provide me with only such a cable.Thank you.
View ArticleRe: DDNS IP constantlly changes between WANs
Yes, I see what you mean now. Everything seems to work perfect for days now! Also, the other ER-6P that I was experimenting on? I am on-site now and it was also crashing, just much less frequently. It...
View ArticleRe: 30-35Mb IPSEC VPN (ERX, ER-PRO, ER4)
wrote: To test if it's ISP related, you could expose the iperf port to the WAN to allow testing without using IPSEC. If I do that, I get about 86 Mbps and the ER-4 CPU usage is 3-4%. It's still all...
View ArticleRe: Dropped Internet - Losing Hope
What firmware version are you running ?Latest is 1.10.5
View ArticleEdge Router in a Data Center
Hi, Hoping to get some advice, currently have 1 Rack in a Data Center with a single Ethernet connection from the data Center for IP transit. Have a /24 IP range that the data Center is announcing for...
View ArticleClik here to view.
Re: Release: WireGuard for EdgeRouter
Yeah....I figured something wasn't alright when I saw those LAN addresses I specified listed as destination in my routing table... Thanks for the pointers.That Andrew Dunn link is great! Haven't...
View ArticleRe: Send WOL packet from Server to EdgeRouter
This is the AVRG750LCD power supply that I currently...
View ArticleRe: SFP SC modules
The Ubiquiti SC fiber modules should work. But there are several more things you need to match. 1) Is this GPON or a direct connection? 2) Is it SC/UPC or SC/APC ?3) Is it single mode or multi mode...
View ArticleClik here to view.
Re: SFP SC modules
wrote:HiDoes SFP SC modules with Ubiquiti routers work?My provider can provide me with only such a cable.Thank you.You need to transition from SC to LC - and there are jumpers to do this easily. You...
View ArticleRe: SFP SC modules
My provider gives modules like this:https://shop.nag.ru/catalog/02086.Moduli-SFP/06896.WDM-odnovolokonnye/15145.SNR-SFP-W35-20-II don't find ubiquiti SC modules, hey exist?
View ArticleRe: SFP SC modules
Information from provider's site:We use the WDM TX 1550 / RX 1310 SFP module, the radiation power is not higher than -10 dBm, the sensitivity of the receiver is not lower than -20 dBm.
View Article