Hi,
Used the GUI to configure, following the guide here: https://help.ubnt.com/hc/en-us/articles/115011373628
Site A:
Firewall: Automatically open firewall and exclude from NAT peer: B.afraid.org description: siteVPN local IP: 0.0.0.0 Pre-shared secret: testtest Local subnet: 192.168.0.0/24 Remote subnet: 192.168.1.0/24
Site B:
Firewall: Automatically open firewall and exclude from NAT peer: A.afraid.org description: siteVPN local IP: 0.0.0.0 Pre-shared secret: testtest Local subnet: 192.168.1.0/24 Remote subnet: 192.168.0.0/24
Get no response to ping.
"show vpn ipsec sa" >
peer-B.afraid.org-tunnel-1: #1, CONNECTING, IKEv1, abcd1234:0000000000000 local: '%any' @ local WAN IP remote: '%any' @ remote WAN IP queued: QUICK_MODE active: ISAKMP_VENDOR, ISAKMP_CERT_PRE MAIN_MODE ISAKMP_CERT_POST ISAKMP_NATD
"show vpn status" >
creating acquire job for policy 192.168.0.40/30[tcp/59447] === 192.168.1.1/32 [tcp/http] with reqid {1}<peer-B.afraid.org.com-tunnel1-1|1> initiating Main Mode IKE_SA peer-B.afraid.org-tunnel1-1[1] to xx.xx.xx.xx (resolved IP)Where's the best place to start troubleshooting? Are there any more detailed logs that record errors? Seems to just be stuck on Connecting.
Thank you!