Re: Block Google's Data Saver(Web Acceleration) Protocol
"other Google services." are these services located on the clients computer?
View ArticleRe: ER DHCP server without a broadcast interface
Ditto, wondering if anyone has gottent this to work. While the ER router has a tremendous feature set, I would love to use it soley as a DHCP server. This is my preferred scenario - configure DHCP...
View ArticleRe: Is anyone actually using MPLS in production yet?
I use it here and there are others that also use it for there wisp. Having mpls does bring in extra money per month for us when we can offer different services across many business locations that one...
View ArticleRe: Dashboard Broken - 1.9.1 alpha 2
Fwiw mine works with the latest 64bit chrome on El Capitan. Safari doesn't.Just loaded alpha2
View ArticleRe: Block Google's Data Saver(Web Acceleration) Protocol
Yes, and actually I found it was blocking google searches. When I get a chance i want to do a more extensive packet capture and run it through Steelcentral Packet Analyzer to see if I can narrow...
View ArticleClik here to view.
Firewall help - block VLANs from accessing admin network
Got another question for you guys! I've managed to create 3 VLANs and prevent them from communicating with each other but still keeping internet access. I'm struggling to figure out how to stop them...
View ArticleRe: Firewall help - block VLANs from accessing admin network
You'll need to create a separate firewall for VLAN_LOCAL. "IN" deals with traffic going to other LANs, "LOCAL" deals with traffic going to the router itself. The trick here is that you will need to...
View ArticleClik here to view.
Re: specific IPs timing out
Sorry I can't reach the sites so I can't ping them but here are the URLs of the ones we've found so far....
View ArticleRe: EdgeRouter X port forwarding not working
Hi there, Thanks for the quick response. I updated to 1.9.0 as soon as I unboxed the router, and it's been very stable. I deleted the Ruleset in Firewall, and deleted the Destination NAT rule. I...
View ArticleRe: EdgeRouter X port forwarding not working
Thanks for talking the time to debug this. it would be great if you can set the forward via gui then show the config via ssh that was set from the gui.
View ArticleRe: Use Edgerouter ER-X to connect via VPN
1 Example of such a thread:https://community.ubnt.com/t5/EdgeMAX/OpenVPN-Client-Setup-for-Private-Internet-Access/td-p/1154803 2 Be prepared to dive into CLI for this
View ArticleClik here to view.
Re: Strongswan periodically crashes & breaks VPN - "thread 10 received 11" ???
marsboer wrote:train_wreck wrote:I wonder if I could set a slightly lower lifetime on the ERL than the TP-Link? That way the ERL would always expire & rekey the SA first?Yes, that would work. But...
View ArticleRe: ER3 DHCP server without a broadcast interface
You could try to add a scope for the link between ER and L3 switch.Then DHCP server will at least start listening for dhcp requests on that interface, maybe it will service relayed requests too (if...
View ArticleRe: New Edgerouter Lite, slow speed.
Is there any chance this gets fixed? I doubled my speed by deleting my bridge and setting up single interfaces; from ~100mbit to 220mbit now. Although still far from the 400-500mbit it should reach...
View ArticleRe: Firewall help - block VLANs from accessing admin network
In addition to previous post:Read this thread for best firewall explanation around:https://community.ubnt.com/t5/EdgeMAX/Layman-s-firewall-explanation/td-p/1436103 Besides dns traffic, you will also...
View ArticleRe: specific IPs timing out
<no config posted, falling back to "shoot from hip" mode> This might be MTU problem. Try setting mss-clamp to 1452 for pppoe interface. When no pppoe present, set it to all ethernet...
View ArticleRe: Firewall help - block VLANs from accessing admin network
Thanks guys, those are great starting points. I forgot that firewall rules apply to the IN, OUT and LOCAL parts of an interface!
View ArticleRe: ERX Bridge Hairpin NAT Bug
I can't use the switch as I stated in my opening post. The switch can't be bridged to a VPN interface because it only has 4 ports (limitation stated when trying to commit). I need one port for WAN. My...
View ArticleRe: ERX Bridge Hairpin NAT Bug
It was the hardware nat that was causing the issue. When I disable it eveything works as it should. It still is a bug that could be fixed incase anyone has to bridge ports instead of use a switch for...
View ArticleRe: EdgeRouter X port forwarding not working
Your router config looks like it should work and I successfuly port forward with ERX v 1.9 so I don't think it's the router. I use PLEX and default it tries to open up a port with UPNP which is usually...
View Article
