Clik here to view.
Re: ERPOE internet not working right
My problem is that the voice works perfectly, but the internet doesn't:
View ArticleRe: ERPOE internet not working right
dpurgert wrote:Check your dyndns settings in both routers ... it looks like two different devices are updating the same account (which will sent dyn into a fit).The IPs in the image are the ones for R1...
View ArticleWhat is the best SFP MM Gbic's?
Looking to connect 8 Edge Router X SFPs back to an Edge Switch 12 F using Multi Mode fiber no longer than 500 feet. What is the concencus on the best Gbic's to use that work well with Ubiquiti?...
View ArticleRe: ERPOE internet not working right
what image? you've just got a shot of airlink showing things are (apparently?) dropping out. If a wireless PTP link is dropping, that may very likely have nothing to do with the router.
View ArticleRe: ERPOE internet not working right
dpurgert wrote:what image? you've just got a shot of airlink showing things are (apparently?) dropping out. If a wireless PTP link is dropping, that may very likely have nothing to do with the...
View ArticleRe: What is the best SFP MM Gbic's?
dunno about the MM specifically (as I don't use MM), but these Microtik SM ones are pretty good.
View ArticleRe: ERPOE internet not working right
voice is "usually" low bandwidth (or at least lower bandwidth). what "VLAN" is having trouble?Also, what are the airmax radios?Why's data traversing that link in the first place though -- looks like...
View ArticleRe: ERPOE internet not working right
dpurgert wrote:voice is "usually" low bandwidth (or at least lower bandwidth). what "VLAN" is having trouble?Also, what are the airmax radios?Why's data traversing that link in the first place though...
View ArticleRe: ERPOE internet not working right
First step then is to rollback the change that broke everything.
View ArticleRe: EdgeRouter PoE for LAN & APs
Fantastic, thank you. I didn't realize eth2 - 4 were hardware switched with each other. Perfect solution. The ER-X was running default 1.9, with hwnat enabled. It could do ~800Mbps.
View ArticleRe: VPN | connecting to different subnets
not without multiple VPN servers hosting multiple subnets. Typically though, one would have a single "VPN Subnet"
View ArticleRe: Can't connect my new EdgeRouter PoE to Internet
What address has your computer gotten from the router?
View ArticleRe: Routing locally originated traffic after failover in 1.9.0
I was wrong in all my responses. lb-local is definitely broken. In my case, I "though" it's working because my test was with PPPoE WAN. When PPPoE link is lost main routing table switches to default...
View ArticleClik here to view.
Re: Routing locally originated traffic after failover in 1.9.0
short answer: You can't really have full control over locally generated traffic on any edgerouter.long answer(shortened): it depends(as always) on what exactly you're trying to control.
View ArticleRe: Routing locally originated traffic after failover in 1.9.0
Short/long answer: depends on implementation. What is lb-local then for? I can now 100% confidently prove it's not working and replicate the issue. What is typical local traffic? Mainly DNS requests,...
View ArticleClik here to view.
Design Review / Sanity Check - Robust home network - ~$1,000 budget
Hi,I've about had it with or hodge podge of consumer grade equipment. We will be switching to Fios later this months so am planning to tidy up some cabling in the next few weekends and hopefully...
View ArticleRe: Design Review / Sanity Check - Robust home network - ~$1,000 budget
This is enormous space, and you seem to plan toprovide WiFi coverage as if it were a tract house.I have to assume it is also well-built, which meansthicker walls, more insulation, robust...
View ArticleRe: Design Review / Sanity Check - Robust home network - ~$1,000 budget
Well, i dont think theres much room for improvements here.Between ERL and ER-PRO, both will do the job. I dont think you need the extra ports from the ER-PRO, but if you want to apply some QOS rules in...
View ArticleRe: Design Review / Sanity Check - Robust home network - ~$1,000 budget
For a home installation at 100Mbps+ Internet speeds,even ER-X will be adequate.There are lots moreimportant places to spend your money. Dave
View ArticleRe: ER-X L2TP/IPSEC VPN Dropping Connection on Windows 10 Client & OSX Client.
So, I am just updating an old post because nobody else ever posted here, but I've noticed there are several hundred views. The firmware for 1.8.5 and 1.9.0 have been out for 3 months now, but I just...
View Article
