LLDP reported via SNMP
I'd like to bump this. I know there was a user at one poitn that provided a patch to install lldp into snmp... but i'm not looking to side load things like that (and I'm not sure it would even work as...
View ArticleClik here to view.
Re: ERlite to ERlite ipsec vpn not working when local ip = 'any' - dynamic...
Well I figured this out.I used the CLI to input the dyndns name to the field. Looks to be a bug in the GUI -Bob
View ArticleRe: Internet Distribution for a Mall
dpurgert I get your point, but the image is just from the internet. It was one of my option as to additional costs may occur upon installing new line. We still have vacant cat5e lines hanging around,...
View ArticleInter VLAN routing with vlan-aware enabled
Hoping someone can help me out. Have a switch switch0 on an ER-X that I each VLAN is tagged as needed and works with vlan-aware is enabled but I can't route between VLANs. I disable vlan-aware and I'm...
View ArticleRe: Routing locally originated traffic after failover in 1.9.0
Here is my temporary rough and dirty workaround (fix) that surprisingly seems to work quite reliably. The script is tailored for specific scenario so you can't just copy/paste but it's easy to modify...
View ArticleClik here to view.
Re: Cymru IPv4 and IPv6 fullbogons
Excuse me , JUNOS haven't the same commands of EdgeOS... I need the translation for EdgeOS!
View ArticleRe: Internet Distribution for a Mall
Do the cabling right. One (or two!) for data, one for voice. If your network plan looks like this: ISP -> ER -> (NAT to 100.64.0.0/10) -> Mall Tenant "CPE" Router -> NAT to 192.168.x.x...
View ArticleRe: Inter VLAN routing with vlan-aware enabled
for the ports in VLAN 1, set the "PVID" as 1, not the VID ... for the vlan 1 and 11 port, set one of the two as the PVID as appropriate.
View ArticleRe: Inter VLAN routing with vlan-aware enabled
Just tried that and same results. The devices can be pinged from the router but can't ping from devices across other VLAN. There is no firewall settings between the VLANs switch switch0 { address...
View ArticleRe: Inter VLAN routing with vlan-aware enabled
the devices themselves don't happen to have software firewalls running, do they?
View ArticleRe: Inter VLAN routing with vlan-aware enabled
Nope, as I mentioned I can ping each device fine across VLANs when I disable vlan-aware on switch0.
View ArticleRe: EdgeRouter setup for Swiss FTTH providers
Ok I found the solution for the replay and the records. They all work perfectly now.Here is my config: firewall { all-ping enable broadcast-ping disable group { address-group IPTV-Multicast { address...
View ArticleRe: Having trouble allowing WOL fowarding
So what if I wanted to wake my home computer while at work. Is the only way to accomplish this to ssh into the router?
View ArticleClik here to view.
Re: OpenVPN site-to-site tunnel - ERLite to ERLite - best performance settings?
Try aes128 instead of the default blowfish. Or use IPSec.
View ArticleRe: ERlite to ERlite ipsec vpn not working when local ip = 'any' - dynamic...
I'll have to try again, I think this was a known bug. Though I was doing all the config from the cli. Is this Ike v1 or 2?
View ArticleVLAN tagging on EdgeRouter
Hi, I'm working on adding a few VLANs on my network to isolate things a bit (e.g. separate guest network, and a separate work network since I work from home). I tried to set up VLANs on the switch0...
View ArticleRe: OpenVPN site-to-site tunnel - ERLite to ERLite - best performance settings?
Every time I've setup openvpn on anything the tun interface has always showed a link speed of 10mb. Maybe a limitation to openvpn?
View ArticleRe: OpenVPN site-to-site tunnel - ERLite to ERLite - best performance settings?
erwall wrote:Every time I've setup openvpn on anything the tun interface has always showed a link speed of 10mb. Maybe a limitation to openvpn?Every time you high-jack a thread you should not expect...
View ArticleRe: Is it normal for a PPPoE connection to re-authorize every 30 seconds or so?
After inspecting logs, I'm pretty sure that it shouldn't be reauthorizing every 30 seconds. The router logs show this:Nov 11 19:43:53 ubnt pppd[5810]: peer from calling number 04:18:D6:0E:08:88...
View ArticleRe: VLAN tagging on EdgeRouter
I don't believe you can do that on an ERPoE-5, only the ER-X and ER-X-SFP. Not sure if there are plans to bring that functionality to the ERPoE-5 in the future, there might be a hardware limitation...
View Article