Re: 1WAN used instead of combination of other WAN (Load Balancing)
edit : Able to browse when plug in other WAN. and poe5 now not that lag. Just slow to save config since have lots of port forwarding. I have a question.Currently, the system running load balancing....
View ArticleRe: Yet another "L2TP service keeps dying" post
I have to do this everytime I want to access my VPN from my laptop. Luckily my phone can connect everytime to execute this command. Its very fustrating.
View ArticleRe: VoIP/RTP direct media with Cloud PBX
Okay so the issue was the NBN in Australia is the government wholesaler, and they have Traffic Classes which some Service Providers leverage.The Fixed Wireless Service provider we switched to was using...
View ArticleRe: Segmenting LAN1 from LAN2
Blocking packets from going through the router (like LAN1 -> LAN2) is handled with firewall rule applied in IN direction.To filter packets destined for ER itself, apply a firewall rule in the LOCAL...
View ArticleRe: Multicast, Sonos, Phorus & Play-Fi Broadcast 255.255.255.255: Discovery...
Thanks for the patience Changed: interface eth1 { alt-subnet 0.0.0.0/0 role upstream threshold 1 } interface eth1.4 { alt-subnet 0.0.0.0/0 role downstream threshold 1 } interface eth2 { alt-subnet...
View ArticleRe: Destination NAT rules
This sounds odd, assuming you actually have a firewall configured you should have to create a firewall rule to go with your DNAT rules. Assuming the traffic comes from your WAN this rule should be...
View ArticleRe: VoIP/RTP direct media with Cloud PBX
Try:set firewall modify CLEAR_DSCP default action accept set firewall modify CLEAR_DSCP rule 10 action modify set firewall modify CLEAR_DSCP rule 10 modify dscp 0and apply to interface
View ArticleClik here to view.
Re: EdgeRouter X setup, can't get past Netgear router log in
So frustrating.1. I changed the netgear to a different number, but then i lose internet connection, unless i let it obtain IP adress automtically.2. I turned of the wifi (from either my laptop, or the...
View ArticleClik here to view.
Re: GUIDE: How to configure Local PPTP VPN on 1.5.0 Firmware, works on iOS
Yep, pparently PPTP has been shown to be insecure. IOS now offers IKEv2, IPSec, L2TP. Not even OpenVPN, I suppose OSS would go against the grain at Apple
View ArticleRe: IPSec issues after upgrade v1.7.0 -> v1.9.0 on ER-8
Hi, I have the same problem. Wrote on a forum not once, nobody answers. Configs are all standard, in them you won't make much. Everything becomes according to documentation:...
View ArticleRe: EdgeRouter X setup, can't get past Netgear router log in
Take your Netgear out of the way to setup your ER-X.
View ArticleRe: 1.9.0 broke dashboard for me (using Firefox)
Just wanted to say that the patch solves the problems I was experiencing with Firefox 48.0 to 49.0.1. Tested on 2 ER-Lite-3 with 1.9.0.
View ArticleRe: Er 8 loadbalance 7wans
Ok i dont have a problem but i try to understand why on the start i saw speeds like 50mbps and now i see 10-13mbps...I am ok with the result its great...
View ArticleRe: IPSec issues after upgrade v1.7.0 -> v1.9.0 on ER-8
I have EdgeRouter Pro and that same issue with IPSec only reboot fix isse but for few hour. and need again reboot :/ When StrongSwan will be updated to support multi connection form one ip + NAT ??
View ArticleRe: Segmenting LAN1 from LAN2
Do you use zone-based approach? If not, do it - its really much easier to maintain and IMHO to setup. This will show you the basics:...
View ArticleRe: VLAN or Separate Interfaces and Subnets
It depends on the physical network layout as well. As soon as you have an area with several clients that should be in different networks but all of them are supplied locally by a single shared switch,...
View ArticleRe: Access server from blocked subnet via external
No, the router is doing exactly what it's supposed to be doing.You need to add the "accept" rules as described previously to allow devices to access your server.
View ArticleRe: Issues with BGP AS pre pend
Ok so I have got a Spare ER out and configured it so it could replace the Cisco. Now it looks like it is working correctly. See below. BGP table version is 4, local router ID is 2.2.2.1Status codes: s...
View ArticleRe: Yet another "L2TP service keeps dying" post
correction,inDNSconfigtreechange and apply doesnot settled the problem.the restart commandvpneither.it isthatwhichelerebootsolved the problem foranindeterminatetime.wecan not use a service like that !...
View ArticleRe: Script to change configuration will not run
Thanks! Please help me for how to execute set command in same way in perl script. (set system host-name krajuskar). Please help me for this.
View Article
