Re: Anyone running a walled garden for suspended clients through the Edgemax?
Sounds like an okay plan. You might run into trouble with people trying to use SSL though.
View ArticleRe: ERPRO L2TP RDP - 2 WAN - NO INTERNET - etc
Ok, here is what it looks like now. But I am still wondering about the DNS forwarding setting for the VLAN since I had the DNS Servers set on the VLAN itself?? firewall { all-ping enable broadcast-ping...
View ArticleRe: ERL Failover with VLANs
If you want your vlans to use the load-balance ruleset then you also need to apply the modify rule to the vlans.
View ArticleRe: 1.9.0 broke dashboard for me (using Firefox)
Hi Ouning Did you have any more luck with the last log file I sent (from when Safari was showing this problem)? Since then, Firefox has stopped, started and stopped working again, unfortunately I...
View ArticleClik here to view.
Re: IPSec VPN sort of not passing traffic, Sonicwall to ER8
Replacing the local address with the eth1 (WAN) IP solved the issue. Thanks stig!! Additionally none of the other firewall rules were necessary for the tunnel to work. I removed everything but an...
View ArticleRe: ERL Failover with VLANs
Not to sound clueless but how would I do that? Which rule is it in the config?
View ArticleRe: Communication between subnets
dpurgert wrote:1. it already is / should be. Your problem is the upstream gateway (10.x.x.x) not knowing about 192.168.x on eth0.2. You may need to NAT though, if you cannot set routing on the other...
View ArticleRe: ERL Failover with VLANs
Addset interfaces ethernet eth0 vif 20 firewall in modify balance set interfaces ethernet eth0 vif 30 firewall in modify balance set interfaces ethernet eth0 vif 40 firewall in modify balance set...
View ArticleClik here to view.
EdgeMax QoS disambiguation(FQ_CODEL, HFQ, SFQ, etc)
Hello, Can anyone shed some light on the correct way of configuration Basic and/or advanced QoS rules? For the basic, my primary needs are serviced based QoS for VoIP/Skpye/general RTP traffic. Via...
View ArticleRe: Communication between subnets
If you can't set static routes on it, you're going to have to do NAT on the ER. Honestly, you might do better setting that thing to bridge mode, and using the ER as your main router.
View ArticleRe: IPSec VPN one end with Dynamic IP
Are you still working this issue? If so, this might help. As always, save a backup of your config before making any changes. Adding these lines to my config.boot file and re-importing, allowed me to...
View ArticleRe: ERPRO L2TP RDP - 2 WAN - NO INTERNET - etc
and ok here are the results: 1. No internet connectivity with both WANs plugged in. If I remove one I can then get out This seems to be working OK now. 2. VPN, I can connect and ping internal...
View ArticleRe: ERPRO L2TP RDP - 2 WAN - NO INTERNET - etc
I'm guess all the issues are related to load-balance since it creates new routing tables for each WAN. Does running "/usr/sbin/ubnt-add-connected.pl" change anything?
View ArticleRe: Can't get traffic on site to site VPN
The static routes may not be necessary if you are simply trying to ping/access the remote subnet over the VPN. If you are looking to route over the tunnel, like 16again said, openVPN would be the way...
View ArticleRe: Communication between subnets
Nope, can't do bridge mode unfortunately, that would effectively eliminate the 10.0.1.x network and I need that for my HDHomerun and wifi in this part of the house (it's an old house, running cable is...
View ArticleClik here to view.
Re: ERPRO L2TP RDP - 2 WAN - NO INTERNET - etc
Connected routes found = 5Route tables found = 2Adding routes to table 201Adding routes to table 202 load-balance member [G-eth1]status = failoverroute table 202default via 71.177.94.1 dev eth1...
View ArticleRe: PPTP server setup - access to router web GUI is ok, but no access to...
Are you still having trouble with accessing your LAN via PPTP? The clients you are testing with, what subnet are they on? If on another LAN in the same subnet as your PPTP server there could be...
View ArticleWas it ever discussed on selling EdgeOS as just an operating system that we...
Yes I do realize that it is Vyos, however nowadays EdgeOS is significantly different than Vyos. Using ZebOS has changed and increased a lot of the capabilities of the box.Was just curious that if there...
View ArticleRe: EdgeMax L2TP VPN issues
I had the same issue a week or two ago with a win10 box. I had no issue connecting with my Linux boxes, iPad, and Mac. I passed it off as a Windows issue on the other persons box.Tomorrow I have...
View ArticleRe: EdgeMax L2TP VPN issues
Actually I think it is Windows 10. I never had the issues when everyone was on 7.
View Article
