Re: Disabled interfaces enables itself after some time
Hey afomins, I haven't tried the other ports. Also i'd check the log and there is something strange going on. Even with nat disabled dhclient.c tries to send packages to (disabled) eth1. ddclient seems...
View ArticleRe: how to setup my wireless APs
post the whole config - it'll be easier to see what you're up to...
View ArticleRe: IPSec site to site VPN using vti interfaces with one router behind a NAT
Try peer 0.0.0.0 instead of peer 185.x.x.x on the Pro.
View ArticleRe: Having issues with "EdgeMAX - VLAN Walkthrough”
The final solution was to move back from v1.8.5 to v1.7.0.... v1.8.5 has been a continuing pain in the butt...
View ArticleRe: Having issues with "EdgeMAX - VLAN Walkthrough”
delstel wrote:The final solution was to move back from v1.8.5 to v1.7.0.... v1.8.5 has been a continuing pain in the butt...I don't consider that a "solution". Is something still not working?
View ArticleRe: IPSec site to site VPN using vti interfaces with one router behind a NAT
UBNT-Arthur wrote:Try peer 0.0.0.0 instead of peer 185.x.x.x on the Pro.Unfortunately I don't think that works with VTI. VTI currently requires a static public IP address.
View ArticleRe: EdgeMax - forward HTTP to Squid
Hello, please can somebody show config of HTTP forwarding to external transparent squid? I have got LAN 192.168.1.x and my sqiud has IP 192.168.1.25 and works on port 3128.I was not able to forward...
View ArticleRe: Having issues with "EdgeMAX - VLAN Walkthrough”
All I'm saying is that I've had 2 seperate vlan issues that were solved by downgrading. I had worked for 2 weeks tring to figure out my mistake. Then downgraded and it corrected the issue. I did not...
View ArticleRe: Having issues with "EdgeMAX - VLAN Walkthrough”
Sorry, I misunderstood your intent of your post. Everything is working and I truely appreciate you response. You guys do have great products. I have a ES-8-150W on order!!! Thanks,Joe
View ArticleL2TP VPN not working after 1.9.0 Upgrade
HI guys I recently upgraded the system image on ER-Lite from 1.8.5 to 1.9.0. The thing is: when any client on Windows connects to Router using L2TP VPN, just have access to router (192.168.10.1 in this...
View ArticleRe: L2TP VPN not working after 1.9.0 Upgrade
Yes Sr, active/active. No changes in router configuration since 1.7.0
View ArticleRe: L2TP VPN not working after 1.9.0 Upgrade
Run following script /usr/sbin/ubnt-add-connected.pl Add it to your wlb transition script too.
View ArticleERX 1.9 L2TP (no load balance)
I cannot get the L2TP/IPsec VPN working under 1.9. I'm testing with iOS 9. Sometimes when I'm already on the network over WiFi I can connect, but even that is sporadic. My ISP says they aren't blocking...
View ArticleL2TP VPN Issues
I have an issue with L2TP. Connecting to an ER Pro from a Macbook Pro. No problem connecting and VPN works well. I think I have narrowed it down to this - If i don't disconnect the VPN before...
View ArticleRe: ER-X L2TP slow connection
try to update your windows 10。early windows 10version has some problem of vpn。
View ArticleRe: ERX 1.9 L2TP (no load balance)
Tryset vpn l2tp remote-access mtu 1360 set vpn l2tp remote-access outside-address 0.0.0.0 set firewall options mss-clamp interface-type all set firewall options mss-clamp mss 1400
View ArticleRe: L2TP VPN Issues
Paging ...can this be related to the recent kernel L2TP module change? did you experience this on 1.8.5 or lower?
View ArticleRe: ERX 1.9 L2TP (no load balance)
That did it, thank you! I think it was switching the dhcp-interface to outside-address, I didn't even need the mss-clamp settings.
View Article
