Re: Dual WAN pppoe and dhcp
Hi Jordan, Thank you for looking at this. I tried changing the default route distance but that seemed to result in partial connectivity. Output of 'show ip route', public IPs masked IP Route Table for...
View ArticleRe: EdgeMax No IPv6 Networking After Upgrade to EdgeOS V1.9.1
Does the router still have IPv6 connectivity to the WAN or is it just the clients that have lost connectivity? I see on eth4 you have the Router Advertisement 'managed' flag set as true. Do you have an...
View ArticleRe: How to capture packets on ER-X acting as a switch?
Not being afraid (on test router...) I tried all /sbin/switch commands ending in dump.Previously I wondered: How could they get individual switch ports onto the router. This command shows they do it...
View ArticleRe: How to capture packets on ER-X acting as a switch?
16again wrote:Not being afraid (on test router...) I tried all /sbin/switch commands ending in dump.Previously I wondered: How could they get individual switch ports onto the router. This command...
View ArticleClik here to view.
Re: How to capture packets on ER-X acting as a switch?
Thanks everybody. It looks like I need to use port mirroring.
View ArticleRe: Xbox Live NAT issue with Edgerouter X?
B4KN1GHT wrote:Here's my configuration. upnp2 { listen-on eth1 listen-on eth2 nat-pmp disable secure-mode disable wan eth0 }Have you tried to enable nat-pmp? I'm not sure which one does it, but I...
View ArticleRe: Xbox Live NAT issue with Edgerouter X?
Wait I think I see the problem. upnp2 { listen-on eth1 listen-on eth2 nat-pmp disable secure-mode disable wan eth0 }You need to "listen-on switch0" because you've bridged them together. I think. But...
View ArticleRe: Problems with L2TP - Client stays connected but can only load limited...
When you say "L2TP between locations" do you mean one L2TP server per site?Note that IPsec site-to-site is not affect.This issue only affects L2TP on Edgerouters (ER-X, ER-X-SFP, EP-R6) with IPsec...
View ArticleRe: local hostname resolution with dnsmasq in v1.9.1
recently posted in another thread about setting the system name-server to 127.0.0.1 for local LAN dns resolution. gfunkdave wrote:... It will also make the router use itself as DNS server, which will...
View ArticleRe: So you want to replace a BT Homehub?
Yeah, 1492 will work. But since FTTC supports it, it's just nice to not have to fragment 1500byte frames.
View ArticleRe: New set up with modem
Thanks karog. So just to clarify, the Arris SB6183 only has a bridged mode and does not need to be adjusted for this?
View ArticleRe: New set up with modem
Bridging only applies to gateways. It basically turns off everything except the modem part of the gateway so that it a acts solely as a modem.The modem, eg your SB6183, has nothing to set in this...
View ArticleRe: local hostname resolution with dnsmasq in v1.9.1
day2late wrote:@gfunkdave recently posted in another thread about setting the system name-server to 127.0.0.1 for local LAN dns resolution. I've tried this already, doesn't make any difference...
View ArticleRe: fix Bufferbloat on Edgerouter X (simply)
I maintain binaries for sch_cake in the thread 4thPotato mentioned. I'm also curious about fq-pie. I'll try to get a build for that running also.
View ArticleRe: Edgerouter X web pages not loading properly or delayed
Oddly enought the situation seems to of gone away and I haven't done anything lately to change the configuration so I don't know what to say.
View ArticleRe: Problems with L2TP - Client stays connected but can only load limited...
Hmm, our plan was to use two edgerouters to implement l2tp over ipsec as described here : https://help.ubnt.com/hc/en-us/articles/204959404-EdgeMAX-Set-up-L2TP-over-IPsec-VPN-serverSo, its unclear how...
View ArticleRe: Load balance or failover from single ISP?
That's pretty clean. I like that. Time to order another router!
View ArticleRe: So you want to replace a BT Homehub?
I agree. I have had issues with 1500 whilst using the white Huawei/ECI modems though and had to resort to MTU 1492. It's normally the domestic Infinity I have the issue with rather than the nBusiness...
View ArticleRe: Impossible Traffic Stats on Dashboard
Thanks Jordan, I'll pm you the config. show load-balance watchdog = Group WAN_FAILOVER eth0 status: Running pings: 4615 fails: 0 run fails: 0/2 route drops: 0 test script : /config/scripts/pinger - OK...
View Article