Re: 1.9.1 OpenVPN issues / Firewall problem?
Sorry, didn't paid attention to tha fact that the 10.10.10.x is already used by the vtun0, did you try with a different ip address?
View ArticleRe: 1.9.1 OpenVPN issues / Firewall problem?
vtun0 is currently (and was) 10.10.10.1eth0 was 10.10.10.5client PC was 10.10.10.10 Should I put eth0 on 10.10.0.1 and client PC on 10.10.0.5 ?
View ArticleRe: 1.9.1 OpenVPN issues / Firewall problem?
I figured out the issue thanks to you guys helping me troubleshoot. It turns out that I had a DNAT or Firewall rule incorrectly configured which was forwarding all traffic externally to my NAS. It was...
View ArticleClik here to view.
Re: Edge router Lite v 1.9 drops RDP connection both NAT and Outgoing
Yes i have one forgot to put it in. I don't know what it does but it works To disable IPv4configureset system offload ipv4 pppoe disableset system offload ipv4 vlan disableset system offload ipv4...
View Articlere new releases, Initial issues with downloading
I would like to suggest that you upload the firmware to the servers, before you post the release info on your blog.Also lock it for comments, and start a forum thread for intial comments. Almost every...
View ArticleDual WAN pppoe and dhcp
Hi All, I am (as a complete novice) trying to set up an Edgerouter Lite (1.9.1) to load balance between An ADSL link (~4Mb/s, uncapped, pppoe, on eth0 ) andA 4G link (~50Mb/s, capped at 18G, using a...
View ArticleSMB Edgemax light, using Eth2 as a secure public hotspot subnet
HI guys, new Ubiquiti user here managing IT for a small business. I have our edgemax light 3 port router set up with eth1 as the primary subnet, on which our Point of Sale database communication and...
View ArticleRe: How to block router access from internet
I am on version 1.9 now. I did use the wizard. I might need to reset it and run the wizard again.
View ArticleRe: Masquerade issues
:~$ sudo tcpdump -i eth1 tcp | grep 192.168.1.2tcpdump: verbose output suppressed, use -v or -vv for full protocol decodelistening on eth1, link-type EN10MB (Ethernet), capture size 262144...
View ArticleAdvanced Queue QOS Setup Questions
All,I have been playing with the Advanced Queue QOS for a few hours this weekend. I have a very slow internet connection and I’m trying to exercise a lot of control over it to help it seem faster. The...
View ArticleRe: Error Upgrading the System
Having the same problem I'm new to this and pretty inept when it comes to networking in general. I understand this thread is "solved" but if anyone is still out there can you step me thru this scp...
View ArticleRe: Using an Ubiquiti Edgerouter with AT&T Gigapower fiber
dpurgert wrote: No, putting the AT&T box in dmzplus mode does not leave it in the equation, at all. It acts as nothing more than a modem, and all other ports on the device no longer work. I have...
View ArticleECN Marking
Is ECN marking available in queues I create, or is it automatic. Perhaps is is only available in SmartQueues? I'm just getting my feet wet with Queues so if this is an obvious miss, my apologies. -Nate
View ArticlePreserve source IP using Policy Based Routing for Transparent Web Proxy
I've configured PBR for my web proxy (transparent mode) which is working well. The only problem is I was planning on catagorizing users by their IP addresss (I use DHCP reservations per device). After...
View ArticleRe: Using an Ubiquiti Edgerouter with AT&T Gigapower fiber
That mfg / model doesn't sound right ... perhaps I've a newer one (AT&T guy did say something about other regions being jealous we got the shipment of new kit -- I figured he was talking about his...
View ArticleRe: MPLS Guidance
Arthur - thank you - You've pointed me in the correct direction and I believe this is solved. If this is useful to anyone else, here is the commands as implemented on each of the three EdgeRouters: R1...
View ArticleRe: Error Upgrading the System
Download WinSCP if you are on windows. Load it and launch it. Use it to connect to your edge router and copy the firmware over to the unit, much like you could copy files in windows explorer or ftp. I...
View ArticleRe: SMB Edgemax light, using Eth2 as a secure public hotspot subnet
Start by revieweing this Layman's firewall explanation
View ArticleRe: QoS CLASS with multiple IP or MAC addresses
afaik, that'll work....but on most setups packets will aready be NATted and all have same source IP.
View Article
