Quantcast
Channel: All EdgeRouter posts
Browsing all 60861 articles
Browse latest View live

Re: VOIP dropped connections

There is no sticky configured on the LB-group used for VOIP.  Moreover, it's fail-over only so only single interface will be used. (as long as it's up)

View Article



Re: Site-to-Site VPN between EdgeRouter Pro 8 and Cisco ASA 5510

Hi 16again, Not sure if I followed your suggestion correctly. From the CLI, I typed: sudo swanctl --log<Enter>ping 72.13.6.218<Enter> All I get after each <Enter> key is a blinking...

View Article

Re: Hairpin NAT from VLAN1 to VLAN2 (I cannot access my webserver on VLAN2...

I am not sure this is solved or not.I only have one device in the vlan2, it can access my domain controller as well as my exchange server by accessing the external IP address. Since I do not have any...

View Article

Re: Site-to-Site VPN between EdgeRouter Pro 8 and Cisco ASA 5510

You should ping from device on your LAN that uses the tunnel.  wroteFor local subnet, I entered a specific IP that belows to the first segment of my private network which belows to my Eth2 port. The...

View Article

EdgeRouter Lite problem

Network: Network A 192.168.33.1 = EdgeRouterPro ---> 192.168.33.10 = PowerBeam AP (bridge) -> 192.168.33.20 PowerBeam ST (Bridge) ---> 192.168.33.30 PowerBeam AP2(bridge) ---> 192.168.33.40...

View Article


Re: Site-to-Site VPN between EdgeRouter Pro 8 and Cisco ASA 5510

The device on my end is a printer, so not sure how to initiate a ping from printer. On the far end, it is trying to connect to a print server, which they have tried pinging already and it is not working.

View Article

Re: EdgeRouter Lite problem

post both of your ER configs.

View Article

Re: Site-to-Site VPN between EdgeRouter Pro 8 and Cisco ASA 5510

also, we both agreed that my local subnet is 192.168.1.250/32. We have confirmed this setting on both ends.

View Article


Re: Trouble upgrading on a new EdgeRouter ERPoe5..

I am getting the same thing. I can't upgrade from WebGUI (fails) and then when I try to do CLI I get the following error: ubnt@ubnt:~$add system image...

View Article


DPI - Netflix shows up as 'Web-Other'

1.8.5, verified I had updated signatures, and when streaming Netflix video, DPI shows this traffic as Web - Other, not under streaming media, so I'm not able to shape it anymore.

View Article

Re: VOIP dropped connections

Sorry, I misread and thought that was just RDP. It sounds like the RTCP is going missing and without reading carefully I jumped to a quick silly conclusion. Hopefully the timeout above resolves the...

View Article

Re: DPI - Netflix shows up as 'Web-Other'

Paging  and   I think I've got one running 1.9a1, will check if that triggers as expected ... though, will be a bit before I can get to it. 

View Article

Re: EdgeRouter Lite problem

EdgeRouter Lite. EdgeRouter Pro no problem, LAN A not use EdgeRouter Pro. LAN A no use ISP for access LAN B. LAN B and LAN A use AirMAX Rádios.

View Article


Re: mdns-repeater with ipv6 networks

If you ever start this work: I have noticed that the repeated messages from MDNS-repeater also forwards link-local adresses (FE80::/10). Connecting to these from another segment obviously wont work....

View Article

Re: EdgeRouter Lite problem

Still need both configs to make sure it's not a misconfig between them. If you don't want to post them both, post the output of show ip routeon both.

View Article


Rule faild

Hello, eth0 Interneteth1 Lan88eth2 Lan33 Rule Set eth2 outDEFAULT - Droprule 1 -action ACCEPT source eth2 des 88.40 rule 2 - action ACCept source eth2 des eth0 i can not ping vom 33.55 to 88.40 and i...

View Article

Re: Site-to-Site VPN between EdgeRouter Pro 8 and Cisco ASA 5510

ome printers allow you to telnet in, and then ping from console. ;-)Best to unplug printer and give that IP temporary to a PC 

View Article


VPN failing, Win 2012 R2 Radius server

Help,  Need debug pointers/tips/hints....  vpn configuration listed below.  Trying to get VPN working.  I have Win 2012 NPS configured, but not sure if its right...  Win 2012 R2 server is at...

View Article

EdgeRouter X SFP never came back after reboot

I just rebooted my X SFP router and it never came back.  walked through a hard reset and am trying to start over, but no connectivity to 192.168.1.1 on eth0.  my laptop has an IP of 192.168.1.2 set...

View Article

Re: EdgeRouter Lite problem

EdgeRouter Lite: P Route Table for VRF "default"S *> 0.0.0.0/0 [1/0] via 192.168.25.1, eth1*> [1/0] via 179.185.51.201, eth0C *> 127.0.0.0/8 is directly connected, loC *> xxx.xxx.xxx.xxx/29...

View Article
Browsing all 60861 articles
Browse latest View live




Latest Images