Re: No Internet Access During VPN Session
When I run the command you gave me, Edgemax returns: The specified configuration node is not valid. I ran the following tho command regarding the DNS: set vpn l2tp remote-access dns-servers server-1...
View ArticleRe: bfd static routes and internet access
OK, to simplify things I took 2 ER-8's here at my office and set them up just like your last example except that I had a PC connected to both routers, not just R2: R2 === switch === R1 ----- Internet...
View ArticleL2TP VPN Clients can't access LAN
Hello, Hoping something can spot the error I've made in my config as I can't see it. So what is happening is I've setup l2tp vpn with radius auth on the edgemax pro8 and clients can connect and auth...
View ArticleClik here to view.
EdgeRouter PoE - IP address Vlan bridge not pingable
- EdgeRouter PoEv1.8.5rc1- ToughSwitch PoE Pro- Rocket 5AC PtMP- PBE-5AC-400-ISO I have an EdgeRouter and on eth3 an ToughSwitch PoE Pro connected.On the switch a Rocket 5AC PtMP connected and wireless...
View ArticleRe: rdnss sent, but network not routed
Bug in the fritzbox. But thats no the point. Obviously the fritzbox does not know and has to know nothing about the network to which is the client is connected to.
View ArticleRe: Access websites from servers on the same DMZ net
Thank you for the reply! So if understand this right I need to duplicate the WAN eth1 dNAT rules for eth2.2 (already done this for the LAN eth0) and add the masqurade rule with Outbound Interface to...
View ArticleRe: bfd static routes and internet access
R2 === switch === R1 ----- InternetHow did you make the both sides "Admin-Down"?
View ArticleRe: Is anyone actually using MPLS in production yet?
, which memory did you find stable for 8gb?
View ArticleRe: Multicast, Sonos, Phorus & Play-Fi Broadcast 255.255.255.255: Discovery...
Hi, as mentioned above, I'm quiet new to EdgeOS and its cli and have a problem while installing... I have moved the .tgz-file into /tmp directory on the EdgeRouter via pscp / windows and untared it...
View ArticleRe: rdnss sent, but network not routed
wroteObviously the fritzbox does not know and has to know nothing about the network to which is the client is connected to. In IPv6 world, NAT isn't normally usedIf your ER-X doesn't do NAT for IPv6,...
View Articletrying to block a set of ip addresses
I am trying to block all my cameras from going to the internet. Using an ER-Xhere is my firewall config: firewall {all-ping enablebroadcast-ping disablegroup {address-group cameras {address...
View ArticleSystem login via AD credentials
I have recently updated my EdgeMAX EdgePro router to 1.9.0. I have successfully set up system login so that i can use my Active Directory credentials to manage the router. The only problem is that i...
View ArticleRe: EdgeMAX - Enable RADIUS server for system login - Not working
I have also got this to work; however, my only problem is that i have to set the network policy that i am using to authenticate using PAP and I really need somthing more secure. Is there a way to...
View ArticleRe: Is anyone actually using MPLS in production yet?
I've been wanting to deploy it on our production network. In an all EdgeMax lab environment it has mostly behaved as expected, but once mikrotik is also involved I've run into some real issue with...
View ArticleRe: Multicast, Sonos, Phorus & Play-Fi Broadcast 255.255.255.255: Discovery...
wrote:Hi @britannic, thanks for your detailed information. Because I'm very new into EdgeOS and its cli, I'm very sorry that I need to ask the following very basic questions. I hope you can answer...
View ArticleRe: Multicast, Sonos, Phorus & Play-Fi Broadcast 255.255.255.255: Discovery...
DennisSchmitt wrote:Hi, as mentioned above, I'm quiet new to EdgeOS and its cli and have a problem while installing... I have moved the .tgz-file into /tmp directory on the EdgeRouter via pscp /...
View ArticleRe: Bug (probably): Mixing IPv6 PD on PPPoE and RA (ULA) config on Ethernet
Hello Mephi, I think you are missing the prefix part for the GUA on the eth2 interface, without that your are indeed overwriting the GUA. give this a try: set interface ethernet eth2 ipv6 router-advert...
View ArticleRe: Performance Issue using ERLite3
Hi everyone... After a lot of troubleshooting, I found that the Windows 10 install on the 2 computers I have was causing the problem. I rebuilt 1 computer with CentOS 7 and the network performance is...
View ArticleRe: VYOS PERL API to execute set commands
, the Perl API lib will only let you read the configuration nodes, you'll still have to access the command line shell environment and run set commands from your Perl script. For EdgeMax examples, check...
View Article
