Enabling dhcpv6-pd pd on openvpn breaks ipv6 for LAN
With all the helpful posts I've managed to get everything working with my current provider XS4ALL.nl however, there is this one thing i just can't get my head around. IPv6 works like a charm on the LAN...
View ArticleRe: Smart Queue and Windows 10 updates
Hi Xan thanks so much for your interest and advice. Just for the sake of the thread I'll restate the primary concern and that is "can one configure the Smart Queue to recognize and throttle the win10...
View ArticleRe: Smart Queue and Windows 10 updates
BTW here is my config for the ERX here in my shop. Pretty basic...
View ArticleRe: Smart Queue and Windows 10 updates
I can also offer that in my experience this anomaly is unique to win10 updates not win7 or 8.1.
View ArticleRe: CLI Integrated dnsmasq Adblocking & Blacklisting v3.6 Easy Config
britannic wrote:@esseph, hmmm, looks like the configuration didn't take during setup and a mangled source URL was fed to the Perl "URI::_generic" module. Can you tell us more about the router model,...
View ArticleClik here to view.
Re: edgerouter, easy ways to import large numbers of rules?
dpurgert wrote:esseph wrote:Heyyyoooo! Let's just say I wanted to import large rule-lists for ip blackholding, or dns blackholing. What would be the easiest way to go about this? The Emerging Threats...
View ArticleClik here to view.
Re: edgerouter, easy ways to import large numbers of rules?
Makuckn wrote:A script. See the example below where I modify an address group with a script. For white-/blacklisting it's enough to set up one rule which accepts/rejects/drops all traffic originating...
View ArticleNot receiving IP from ISP using dhcp on eth0 (Edgerouter Lite and D-Link...
Hi, I have setup the Edgerouter Lite using the standard wizard where eth0 is connected to a bridged 4G modem (D-Link DWR-923), eth1 and eth2 are local LAN's. The problem is that I don't get any IP...
View ArticleRe: Ipsec vpn between Edgerouter and Draytek 2960
I would be as granular with the proposals and auth as you can. what is available?
View ArticleRe: Cake compiled for the EdgeRouter devices
Hi Six, Is the below right for the config. I used what the adsl mobem syncs at and put the percentage at 95% on both upo and down. The custom options i put both best effort what other option are...
View ArticleRe: Not receiving IP from ISP using dhcp on eth0 (Edgerouter Lite and D-Link...
set the d-link device to bridge (modem-only) mode. edit --> might also need to shut it off for a few minutes too -- a lot of ISPs lock to the first device they see (in your case, the other computer).
View ArticleRe: Not receiving IP from ISP using dhcp on eth0 (Edgerouter Lite and D-Link...
Hi, The modem is in bridge mode and then I don't get a dynamically assigned IP to the edgerouter on eth0. If I connect a laptop I get the IP without any problem. I have turned it off several times and...
View ArticleRe: Not receiving IP from ISP using dhcp on eth0 (Edgerouter Lite and D-Link...
Try masquerading the ER's MAC address to that of your PC. Could be that they're not releasing the "lock" on that MAC address. THEN 1. Turn off modem & router2. Wait 2-3 minutes3. Turn on modem,...
View ArticleRe: pppoe or ?
No, I don't. My provider will give me whatever I need, so long as I use them. However, I currently have only 2 statics available to me.
View ArticleRe: pppoe or ?
You can't give your customers publics until you own a block. You will have to use CGNAT until then.
View ArticleRe: IPv6 Offload not working?
I dount you will ever get an answer. I have an ERL where my IPSEC tunnel is slower with offloading turned off. Have tried several times to get an answer and all I have ever gotten was crickets chirping.
View ArticleRe: pppoe or ?
Dpurgert, thank you for your time. I have heard of CGNAT, do you know of any technical information that I can use to aide me in setup. I am currently using an edge router pro.
View ArticleRe: pppoe or ?
It's not really any different that regular NAT -- just that you're using RFC6598 space (100.64.0.0/10) instead of RFC1918 space (10.0.0.0/8, 172.16.0.0/12, or 192.168.0.0/16). So your setup will end up...
View ArticleVPN Clients and Multicast
Hi, I have enabled L2TP w/IPSec VPN on my Edgerouter X. My VPN clients are able to succesfully connect and see other hosts on the remote network but the VPN clients cannot communicate to the multicast...
View Article
