Simple LAN 1:1 NAT ER-X
Bit of a noob, I need to NAT 192.168.1.x (eth0) to 172.25.10.x (eth1) and the reverse. There is no Wan.
View ArticleRe: CLI Integrated dnsmasq Adblocking & Blacklisting v3.5.5 Easy Config
britannic wrote:vlsn wrote:Hello and thank you for this great method of blocking ads, it's working great on my home network with an ER-X. The main issue I'm having is that Spotify is currently not...
View ArticleRe: Multicast, Sonos, Phorus & Play-Fi Broadcast 255.255.255.255: Discovery...
, thanks for the feedback, I have updated post 8.
View ArticlePseudo ethernet woes
I'm trying to create a separate subnet for certain devices on my network. To this end I created a pseudo-ethernet interface attached to one of my internal network ports. eth0 WAN external ipeth1 LAN...
View ArticleStatic IP wierd issue
I have bee assigned a statip IP. when I enter the infoIPGatewayDNSinto edge router lite. some of my clients cant see the IP address. its like its black listed but its not. As soon as i switch to...
View ArticleRe: Access websites from servers on the same DMZ net
I duplicated the dNAT rules to eth2.2 and added the masqurade rule but I still have the same problem.
View ArticleRe: Simple LAN 1:1 NAT ER-X
Did you try with SNAT and DNAT rules (Firewall/NAT, NAT tab) ? The router can translate the s.ip/d.ip of the packets direct, or which are leaving, its interfaces.Cheers,jonatha
View ArticleRe: Followed this guide to replace usb pen but it boots once then wont reboot...
So Ive started getting this error again on a pen that was working fine. Here is the output of console during boot: U-Boot 1.1.1 (UBNT Build ID: 4567941-g15e9b5d) (Build time: Jun 4 2013 - 14:51:00)...
View ArticleEdgeRouter Pro - Virtual Router Redundancy Protocol (VRRP)
Is anyone using Virtual Router Redundancy Protocol (VRRP) at the moment, and is it working? Does this auto-failover if one unit stops working? We are proposing this for an island location where...
View ArticleRe: EdgeRouter Periodically Loses Connection
I've been running a continuous ping this afternoon to three addresses. 192.168.1.254 is the inside LAN1 interface. \192.168.100.1 is the cable modem.8.8.8.8 is Google DNS.All three of these were...
View ArticleRe: EdgeRouter Pro - Virtual Router Redundancy Protocol (VRRP)
I had it working perfectly between two Pro's in our production rack but ended up needing room and took the second one out. Just make sure that they dont both try to become master. This is most easily...
View ArticleRe: Pseudo ethernet woes
Your peth1 doesn't have an IP assigned. Here is my config that works: ethernet eth0 { address 192.168.100.1/24 description "Internal LAN" duplex auto } pseudo-ethernet peth0 { address 192.168.168.1/24...
View ArticleRe: What is Smart Queue and when would I use it?
is there any way to check on how its working? stats, etc?
View ArticleRe: CLI Integrated dnsmasq Adblocking & Blacklisting v3.6 Easy Config
Yes, v3.6 is installed on all the ER-X's I have access to, without issue.
View ArticleRe: bfd static routes and internet access
I did disconnecting/connecting for 30 some times, I couldn't reproduce the issue. The ping on the client kept working afterwards. Ping logs -ubnt@osboxes:~$ ping 4.2.2.1 PING 4.2.2.1 (4.2.2.1) 56(84)...
View ArticleRe: Pseudo ethernet woes
So simple and obvious! But I missed it none-the-less. Thanks for the swift help.
View ArticleRe: hw offload, load-balance and why not just enable all?
You can keep offload enabled at all time. Traffic that is not eligible for offload will not be offloaded.
View ArticleMultiple Address Groups
Hi There.... Considering the following LB rule, can I add a second address-group..?? Or do I need to add a second rule? Thanks..!! rule 50 { action modify description "Do not load balance these...
View ArticlePublic IP routing for a /28
Hey Guys, Im new to the EdgeMax line and have some questions. I tried some of the other suggested threads but nothing for exactly what I want. From my provider i get a WAN IP via PPPoE (that part seems...
View Article