Re: 1.9.0 broke dashboard for me (using Firefox)
Just want to report that the dashborad works just fine with the newly released BRAVE browser. That is with the patch loaded in the router. I will test with a router that does not have the patch...
View ArticleRe: Edge Router -> Cisco Switch (IP unreachable) VLAN Issue?
rdepas wrote:Try adding the access point command to the Cisco switch for ge-1/0/1. It may be that you don't have any native vlan assigned to that port. You're also connecint an access port on the ER...
View ArticleRe: How to bind two LAN ethernet ports?
Thank you, will try this one and keep you posted.
View ArticleRe: OpenVPN policy based routing not working... argghh
Were you able to figure this out on your own? I had a similar problem and it was my OVPN file. I needed to add route no-pull to my OVPN file so I could route a specific network out that interface. When...
View ArticleRe: EdgeMax Router + AirFiber + Cisco Switch
From Site C, the default gateway is transit vlan in SITE A.From Site A, the default gateway is the firewall IP in SITE A. The firewall manage all the routes.
View ArticleRe: 1.9 breaks config on ER-X
Looks like the load-balancing watchdog is the culprit. For whatever reason, shorlty after bootup it will pull all the tunnels from load-balancing even though the ER-X has internet access and the...
View ArticleRe: Having Trouble with Enable Hairpin Nat
Thanks for the suggestion, but that doesn't really do what I would like I don't think. I can already access my website internally if I navigate to my internal IP, I would just prefer if I could...
View ArticleRe: VLAN Routing on Edge Router
Hi can you please post your config as I have the same issue.
View ArticleRe: Edge Router -> Cisco Switch (IP unreachable) VLAN Issue?
Meant to type 'access port' not access point. Need to let the interface know what vlan is used when the traffic comes across untagged. You defined what it should look for when traffic is tagged. Since...
View ArticleRe: VPN Tunnel Down
This is really puzzling. Like the two tunnels not even matching each other.Double check your /etc/ipsec.secrets file to ensure it was generated correctly. Post it here for review (just obfuscate the...
View ArticleRe: 1WAN used instead of combination of other WAN (Load Balancing)
alright. now I will do config for eth4 load balance. Will update again
View Articleconnect my new edgeswitch lite to edgerouter or pfsense?
Hello All.. I think I have looked at too many youtube videos. I an purchasing an edgeswitch lite (24 port) and am very excited.I watched a ew videos on the edgewsitch with POE passthrough and thought...
View ArticleRe: DHCP server always gives out address from .38
Even expired leases are still stored in the leases file, and the dhcp server will try to re-issue the same old expired address to clients.
View ArticleRe: Having Trouble with Enable Hairpin Nat
Easiest way to go is remove your dNAT rule, and add port forward on portforwarding tab.It handles automatic firewall and hairpin stuff in background. Hard way: Duplicate your dNAT rule on any internal...
View ArticleRe: Swisscom IPTV, only records works!
Hello,I tested with the source address 0.0.0.0, but it still does not work.I also changed igmp-proxy with eth5.10 but nothing.records works, I have also access to tv guide but nothing to broadcast all...
View ArticleRe: connect my new edgeswitch lite to edgerouter or pfsense?
Huh? That makes no sense. The Edgerouter also includes firewalls as does 99% of routers out there. No point routing all this traffic inside the network only to have it blocked further down the line....
View ArticleClik here to view.
Re: Running OpenVPN on an ER8: 1.9.0 Issues.
... Found the answers. And they took a lot of work to find...!!!!! Especially when you're not a Network Guru....... Issue 1.The 4G modem I use issues DHCP on the 192.168.1.0/24 network. So the laptop...
View ArticleRe: ER-Pro BGP process lockup
Those symptoms indicate that bgpd is still running but it is stuck in some weird state and ignores messages from CLI and neighbors. Maybe this problem occured some time before, but you noticed it only...
View ArticleRe: Running OpenVPN on an ER8: 1.9.0 Issues.
related to DNS server, when I don't need the local DNS to resolve some hosts that are only inside the LAN/VPN, I use the following: set interfaces openvpn vtun0 openvpn-option '--push route 8.8.8.8...
View ArticleRe: Howto: Use an ER-X as VPN Remote Access Server (IKEv1 + PSK)
Well, I have a couple of reasons. Security-wise both are similars, IKE/IPsec encryption has no major known vulnerabilities, and properly implemented he still secure and easy to manage, without Radius...
View Article