Unhelpful SSH Key Addition
Hi, I'm trying to add my SSH key to the configuration since simply adding this to authorized_keys gets nuked on a reboot or whenever the router feels like it. I've tried adding the key through the web...
View ArticleRe: Firewall SOHO Defenses
I truly appreciate the disussion, recommendations and criticisms. rule 10 has been considered for the event where one of my hosts opens a legitimate communication against my will, ie. via internal...
View ArticleRe: Firewall causing trunk to stop working
I appreciate the response. So, I added: name ALLOW-ALL { default-action accept rule 1 { action accept state { established enablenew enable related enable } } rule 2 { action drop log enable state {...
View ArticleRe: Firewall causing trunk to stop working
You have to assign, for the vlans, the sub-interfaces (ethX.Y) to the zones, not the physical interfaces .Sorry, didn't read before about the default policy 'accept ' ...... why accept ?Cheers,jonatha
View ArticleRe: Firewall SOHO Defenses
Post your config so we can see what the rule is actually doing. Edit -grr autocorrect
View ArticleRe: Firewall SOHO Defenses
Attached is the firewall section from show configuration. If more is required, please say so. Thanks again for the efforts to help me to decrease our computer vulnerabilities.
View ArticleRe: Firewall causing trunk to stop working
That was it! Of course, in hindsight, it makes total sense... Thank you for the solution. As for the universal accept, it was to make sure I wasn't blocking something with the firewall. I wanted to...
View ArticleRe: Edge Router Cannot Download at Max Bandwidth
Thanks for the suggestion. I have disabled the QoS and the problem still persists.
View ArticleRe: DNS Forwarding
I don't see anything in your config that would explain what is happening. What is the content of /etc/dnsmasq.conf?
View ArticleClik here to view.
Re: Multiple webproxy/squidguard
Why are you wanting to deny your teachers of finding a date? Teachers need love too!
View ArticleRe: DNS Forwarding
Here is dnsmasq.conf and resolv.conf# # autogenerated by vyatta-dns-forwarding.pl on Fri Sep 2 15:22:38 EDT 2016 # log-facility=/var/log/dnsmasq.log interface=eth1 interface=eth1.5...
View ArticleRe: EdgeMax rescue kit (now you can reinstall EdgeOS from scratch)
andrewglass3 wrote:However when I unplug power and move the router then power it on it fails to see the usb pen and drops to the following prompt Octeon ubnt_e100# Any ideas?if you want to avoid issue...
View ArticleRe: EdgeMax rescue kit (now you can reinstall EdgeOS from scratch)
Try a USB 2.0 stick.Or add some more time at boot so that the USB Drive is initialized before being accessed.
View ArticleCannot tracert from Win10 through ER-X to Internet
Hi, I am new to the ER-X series so appologies if this is simple. I have a simple network configured with Wan2Lan2 wizard. I enabled hwnat offloading to prevent the cpu from maxing at 500mbits, but...
View ArticleERL Audible Hissing
Picked up an ERL a few weeks ago and have noticed an audible hissing/noise attributed with load on the router. It will make a high pitched hiss and click like sounds (similar to a laptop hard drive),...
View ArticleRe: Lutron and ERL IGMP and Multicast
Im having the same issue. The odd part is that i could reach the repeater sporatically but now i cant connect at all. Very frustrating!
View ArticleBlock interface to WAN out
Trying to block access from eth2 to Internet on v1.9.0. Set Intreface Addr (either Network) as eth2 with CLI, but eth2 still able to send packets to Internet. What's wrong? interfaces { ethernet...
View ArticleRe: Cannot tracert from Win10 through ER-X to Internet
Just tested a Mac on my network and it works fine, so I'll throw this out as a Win10 issue and not the firewall.
View Article