Bandwidth usage, stats and history - Edgemax
Hi Guys, I can't find a concrete answer to this issue.Is it on the roadmap for EdgeOs to get to a state where is records and displays Bandwidth usage, stats and history per IP for data flowing through...
View ArticleRe: EdgeRouter X SFP fiber link to Unifi Switch not working
Maybe check through this post if your SFP modules are compatible i know not all modules are compatible.https://community.ubnt.com/t5/EdgeSwitch/SFP-modules-compatibility/td-p/1059539 I use two...
View ArticleRe: VLAN Offloading Issue?
Are there any updates about this issue? When weturnVlan offloading on we get this messages:Aug 17 11:11:01 bln0-cr-01 kernel: protocol 0800 is buggy, dev bond0 Aug 17 11:11:01 bln0-cr-01 kernel:...
View ArticleRe: EdgeRouter X SFP fiber link to Unifi Switch not working
also make sure your fibre port is configured, if its working over copper it sounds like your missing some config somewhere either it be on the fibre port or the switch receiving the fibre
View ArticleRe: Bandwidth usage, stats and history - Edgemax
I might be miss understanding but are you not referring to DPI, in witch case the EdgeOs does support DPI but I do believe atm its model specific which routers support the DPI functionality I have an...
View ArticleRe: how do i import configuration commands?
Excuse this noob question but does the download configuration not pull down the CLI issued config also, because i only use the download config function and was assuming this is a complete config copy...
View ArticleRe: Policy based routing for specific ports
16again wrote:test2: destp port=80 : Check if page used does a redirect to https. If so , test with both dest ports 80 and 443test3: So source port filter works! This is sort of how you use it for DL...
View ArticleUpdate to 1.9 broke my l2tp/ipsec
Very strange behaviour. I updated my ER-8 to 1.9 an suddently I cannot access my server ILO4. The L2tp config is the same unchanged: l2tp { remote-access { authentication { local-users { username...
View ArticleRe: ER-X-SFP - setting the SFP port speed
Hi, is this the SFP1G-SX-85 SFP module you mentioned above ? http://www.fs.com/products/13274.htmlOr can you provide us the link to refer to in the future? Thanks in advance.
View ArticleRe: Bandwidth usage, stats and history - Edgemax
apologies, should have given a bit more info. i'm running edgeos 1.9 on an ER-XDPI is active.doing a brilliant job at web filtering, bandwidth usage and reporting per IP.but it's not retaining...
View ArticleRe: how do i import configuration commands?
The "CLI configuration commands" are stored in /config/config.boot (after you issue the save command when entering tem). So if you want to backup only that all you need is /config/config.boot.There are...
View ArticleRe: block clash of clans game (port tcp 9339)
can you tell me what to do in this to block coc?
View ArticleRe: OpenVPN is connected, but showing TBD for the IP address
yes I have, but I believe that's only affecting 1.9.0 installations, I'm running 1.8.5.
View ArticleRe: Policy based routing for specific ports
But test3 succeeded (source port 1024 - 65535) , so using sourceport works, and passes VPN tunnel fine. Test2: You could try using 2 seperate rules for dest port 80 and 443. Maybe combining multiple...
View ArticleVPN tunnel between three devices - two Public IPs and one Private
Hello!I would like to connect three routers using VPN tunnel.Two routers have public IP and one has private IP.I would like also to ping hosts between LANs, for example: host from LAN 10.10.10.0/24 has...
View ArticleSuspicious ssh activity
Hi On my WAN_LOCAL, I had enabled remote ssh and while going through my firewall stats, I saw the stats counter building up. nestat showed an establised connection over port 22 from IP 157.181.28.113,...
View ArticleRe: High CPU/latency when using QoS Basic Queue
I'm pretty sure I had read in an earlier forum that QoS does not disable hwnat but I think you are right about the ER being underpowered for this. In any case, it makes the QoS function essentially...
View ArticleClik here to view.
Re: Ipv6 config on ERL with 1.9
Does Comcast actually only give out /60? I know my ISP does /64. I'll give it a try though, thanks I never would of thought of it otherwise
View ArticleClik here to view.
Re: 1.9.0 broke dashboard for me (using Firefox)
Here is websocket capture from Firefox developer:
View Article
