Clik here to view.
EdgeRouter X + 2 Unifi AP AC (topology suggestion)
I'm a noob but willing to learn and read.I'm thinking of upgrading my home network. Draft topology is: Any suggestions? Thanks!
View ArticleRe: Migrating to Zone based firewall
Some basics that you are probably already familiar with:ZBF uses a concept of managing traffic flow. In other words policies are applied to traffic flowing from one zone to another, rather than being...
View ArticleSlow downloads on Steam
Hello everyone! I hope you can help me out here. Currently my internet plan is 500 down/25 up and I get those speeds for the most part. Doing a speedtest via speedtest.net usually yields ~450 down and...
View ArticleRe: Can't route over a site-to-site tunnel...
On firewall 2, this won't help: name VPN_OUT { default-action drop description "" }During test, get rid of all firewall rules on vtun interfaces, then apply them one by one
View ArticleRe: GRE/IPSEC tunnel won't fully initiate until traffic is seen from the...
At least 4 mins exceeds the default udp timeout timer......but keep in mind we're talking about timers on the NAT device, not on the ER
View ArticleRe: How to protect from ipsec outbound leakage?
VTI or GRE/IPSEC tunnel should be usable. Make 2 routes (for each remote network). The normal route is pointing to tunnel device, and set preference (metric) to value like 50. Now add exactly the...
View ArticleEstablishing GRE tunnel with a server using Open vSwitch
Hello, I've a dedicated server which uses Open vSwitch to manage some networks (with kvm virtual machines and some remote sites). On my server, i've the following : [root@astatine ~]# ovs-vsctl show...
View ArticleRe: Establishing GRE tunnel with a server using Open vSwitch
I doubt you can do:set interfaces tunnel tun0 local-ip 0.0.0.0try hardcoding an ip address
View ArticleRe: Establishing GRE tunnel with a server using Open vSwitch
hello, this works with my method ''bridge''. gre packets are transmitted, i guess that my tunnel is working. no?
View ArticleOpen VPN and PPTP/L2TP VPN
Hi,I have an Edgemax router running 1.9.1 and have had a PPTP VPN running for several months. This week I setup an OpenVPN connection using source IP rules so that I could have some clients on my LAN...
View ArticleRe: Vlan Aware on Switch0 unavailable now on V1.9.1
I was pretty sure I saw it in a previous release like 1.8.x and I checked the bux in the GUI and then lost management to unit, reset to factory and just did a basic config but neever proceeded any...
View ArticleRe: "!PE Ring" kernel warning appearing in logs on ER-X
16again wrote:Google doesn't come up with anything usefull, so my guess it's specific to offloading hardware.Try with offload disabledHave done some testing with the various offload options and it...
View ArticleRe: Slow downloads on Steam
Look for and fix any ethernet links in the chain that are negotiating only 100Mbps speeds.
View ArticleRe: Slow downloads on Steam
How do I go about doing that exactly? Forgive me I'm not the most advanced user, but I can get around and check stuff with some guidance.
View ArticleRe: How to protect from ipsec outbound leakage?
VTI is not an option in many situations, including mine. It requires VTI on both sides of the connection, and I have multiple 3rd parties who I have no control over. I have to use the old policies...
View ArticleRe: Plugin framework
Which commands do you want to fix? We have fixed the missing leases issue and the fix will be available in the next firmware release.
View ArticleRe: Slow downloads on Steam
Is the Linksys managed or unmanaged? Does it have indicator lights?
View ArticleRe: Migrating to Zone based firewall
waterside wrote:Some basics that you are probably already familiar with:ZBF uses a concept of managing traffic flow. In other words policies are applied to traffic flowing from one zone to another,...
View ArticleRe: Slow downloads on Steam
It's an unmanaged switch. It is a Linksys SE3008 and it does have indicator lights on it which light up green for activity. The things I have hooked into it are my main PC, a spare PC that stays off,...
View ArticleRe: Allowing traffic from DMZ to LAN
ive made that rule and now i can access teh server via SSH from my lan but, how can i allow the server to access one of the devices on my lan on say http? which ruleset does this enter
View Article
