Re: New to EdgeRouter Pro - Network Discovery
I have never ran into this bug. I can connect via a hostname to all my devices. Thats weird. is this a known bug?
View ArticleRe: Setting up EdgeRouter to be a vpn client
I meant is there another way to avoid this without changing the subnet or class-type network? As you join multiple VPNs together, your bound to run into this. From a google search I came across...
View ArticleRe: Allowing traffic from DMZ to LAN
name DMZ_IN {default-action dropdescription ""rule 10 {action acceptdestination {}log disablesource {}state {established enableinvalid disablenew disablerelated enable}}rule 20 {action droplog...
View ArticleEP-R6 WAN vtun0 to switch0 Access
Hello -I am implementing an EP-R6 configured using wizard as follows -Eth0 - WAN 10.200.201.1/24 (static) - connected to PicoM2HP 10.200.201.12/24 (static), No DHCP service.eth1 - PBE-5ACeth2 -...
View ArticleEdgeRouter Pro - bgp community problems
I have spend several hours trying to get this router to work, but it seems like there is some kind of a bug when I want to set a community to a 32-bit ASN. The router did complain about my community...
View ArticleRe: GRE/IPSEC tunnel won't fully initiate until traffic is seen from the...
Sorry meant udp 4500<->4500.But you do have keep-alive configured, so every 30 sec you should see a packet exchange.other thing to try: -To completely rule out firewall: If tunnel is already up,...
View ArticleClik here to view.
Re: UDP NAT Problem
Focus on tuples shown (source-dest IP addresses and source dest ports) on WAN side of connection:Both connections belong to 1st LAN device. Part shown must be unique, since ER uses it so return...
View ArticleRe: EdgeRouter external IPs on different ports
He only has a single /27.Divide it into 2 halves , both /28Pick the /28 where the ISP default gateway is, pick an IP address in that range, and assign to your WAN port, using /28 mask. Enable...
View ArticleRe: Setting up EdgeRouter to be a vpn client
Normally routes for 10.0.0.0/8 and 10.10.13.0/24 can co-exist fine. On packets destined to 10.10.13.0/24 , the more specific route should be used, the rest of 10.0.0.0/8 destinations uses /8 match....
View ArticleRe: EP-R6 WAN vtun0 to switch0 Access
You're not routing between eth1....eth4 ports. So devices connected probably will not use the ER as default gateway.To at least reach devices in 10.200.200.0/24 add a masquerade rule onto switch0...
View ArticleRe: edgemax dhcp server issue with multiple IP addresses on an interface
This might be an old thread, but I wanted to comment with my two cents and how happy I am I found this. Although, I'm unsure yet if my own implementation will work. In my trials on my edgerouter-poe,...
View ArticleDual WAN, port forwarding and connected routes
Dear community We have the following setup: EdgeRouter PoEv1.9.1Dual WAN with eth0 as primary and eth1 as failover-onlyBoth WAN interfaces get a dynamic IP address from their respective ISP.The...
View ArticleEdgerouter X SFP L2TP/IPSEC loggin WAN / connection problems / Lan
Hello everyone, im trying to set up my VPN Server. Its not like in the tutorials where the VPN is behind a modem. My VPN is in my LAN. Inside my local area network the vpn is working. From home or from...
View ArticleClik here to view.
Re: EdgeRouter external IPs on different ports
16again wrote:He only has a single /27. Yeah, that's what I thought... splitting it and using proxy-arp can work (but tends to open rabbit-holes, in my experience )
View ArticleRe: Allowing traffic from DMZ to LAN
Ive cleared eerything out of the DMZ_IN rule at the minutes and want to start again Ive now lost ssh access to the server on the DMZ, and it has also lost internet access which is fine for now - its...
View ArticleDelays with destination policy routing
Hi I got a ER X-SFP router in a destination port routing mode split between 2 ISP. It all works fine. VOIP down eth0 and everything else down eth1. This all seems to work fine, except there is a...
View ArticleMultiple teli-work VPN issues
I have a edgeouter lite with a unifi switch hooked up to 1 LAN port. The other LAN port is empty due to wanting to offload switching strictly to the unifi switch. My wife works from home and uses a VPN...
View ArticleRe: Multiple teli-work VPN issues
One more note, prior to getting the unifi switch, she used to have VPN issues just connected on her own and her throughput was lower, since incorporating the unifi switch into the mix the throughput...
View Article
