Re: L2TP VPN config - today's puzzle!
I may have found a solution to this issue. Go through all your firewall rules and make sure they have descriptions make them simple no special characters. check your nat rules as well and do the same...
View ArticlePlugin framework
I'd like to make a plugin to fix CLI commands with dnsmasq dhcp, is there a edgeos plugin development framework I can use to add commands?
View ArticleRe: ER-8 Not replying to ARP broadcasts
Here's the output for those commmands: show interfaces:ethernet eth0 { address description WAN duplex auto firewall { in { name WAN-IN } } speed auto...
View ArticleRe: L2TP Stopped working after working fine for over a year.
WAN_IN rule 50 was the last rule put in, also just happens to be around the same time L2TP stopped working. Heres the rules I added after rule 50 that never worked: WAN_IN: rule 60 { action accept...
View ArticleRe: L2TP Stopped working after working fine for over a year.
Maybe one doesn't have anything to do with the other....IDK....It works now
View ArticleRe: NAT Loopback Stopped Working After Adding Firewall Rule
Sorry, the auto firewall is only for the wan interface ...As test, add these lineedit firewall name ETH1_ETH2_IN set rule 5 action accept set rule 5 description "what you want" set rule 5 source...
View ArticleRe: L2TP VPN config - today's puzzle!
If that doesn't work or if you want to try before hand in non-configure type "show firewall statistics and take note on the number (or lack thereof) for your l2tp rules. then try to connected from a...
View ArticleRe: Emerging Threats Blacklist
Many thanks to everyone who has contributed to this thread. I have spent the day reading, and have implimented the Emerging Threats blocklist. $ sudo ipset -L ET-A | count912$ sudo ipset -L ET-N |...
View ArticleRe: Router Setup Question - No WAN Access on eth2
To be honest, I don't see anything which could block ... but is Sunday evening here, and I'm a bit tired ...Maybe , a couple of fresh eyes, here around, will be able to see something that I'm missing,...
View ArticleRe: Router Setup Question - No WAN Access on eth2
That's the strange part, I was able to get a dhcp address just fine on eth2. However, couldn't reach the gateway or any sites, including pinging 8.8.8.8I'll keep at it, thanks for checking
View ArticleRe: Using an Ubiquiti Edgerouter with AT&T Gigapower fiber
I did some data throughput tests with my ERLv3 a while back, and with hardware offloading disabled (as it would be in bridged mode), throughput maxed out at around 160Mbit/sec. See 4th post in this...
View ArticleRe: ERLite vs. ER-X vs. ER-POE?
Some ProSafe switches are managed, others are not. If you can log in to yours via a web page then it most likely supports VLANs.
View ArticleRe: ERLite vs. ER-X vs. ER-POE?
gfunkdave wrote:Some ProSafe switches are managed, others are not. If you can log in to yours via a web page then it most likely supports VLANs.Mine is a GS108. It is definitely not managed.
View ArticleRe: CLI Integrated dnsmasq Adblocking & Blacklisting v3.6.3 Easy Config
Is there a way to have a local file for excludes? I find that there are quite a few sites that need to be excluded and installing the latest version wipes all previously excluded sites.
View ArticleRe: /var/log/auth.log spam from ubnt-util, EdgeRouter Lite 1.8.0
I don't think they ever got it fixed.
View ArticleRe: Router Setup Question - No WAN Access on eth2
I noticed on screenshot your WAN IP is in /24 subnet.....so maybe you're already behind another router doing NAT.Is WAN IP also in 10.0.0.0/24 range?
View ArticleRe: Router Setup Question - No WAN Access on eth2
So eth1 is my main home network that everything is currently running on. I just recently added eth2 into the situation going to a seperate switch that I am plugging into with this issue. I assume that...
View ArticleRe: Plugin framework
I don't believe so, but I would root through this "plugin" to get an idea of what you need to...
View ArticleRe: Router Setup Question - No WAN Access on eth2
Check that your ISP isn't using the 10.0.0.0/24 network as well .....Could you post the output of the routing table ?route -n(In case, hide the first two octets of your wan's ip address)Cheers,jonatha
View Article
More Pages to Explore .....