Re: EdgeRouter Lite queries - DDNS & Load Balance
I hope this helps them: I was presented with the same situation mentioned here. The problem is the source of the value for the IP address to update on the DDNS service. In order for the EdgeOS to place...
View ArticleRe: Dell PE + BCM57712 + EdgeMAX issue
This is the routing forum post in the switch forum.
View ArticleRe: Dell PE + BCM57712 + EdgeMAX issue
But if i had to guess upgrading to the latest firmware 1.7 would probably solve your problem.
View ArticleRe: Dell PE + BCM57712 + EdgeMAX issue
You may be correct about the threat so I'll start another but 1.7 appears to have only broke parts of the GUI, interfaces still down but good suggestion.
View ArticleIPSEC VPN Help
Hi, I am trying to set up IPSEC site to site VPN's between a variety of Edgerouters (lite, X sfp and pro). Currently I'm trying to get a test session set up between a Lite and and X sfp. I've read...
View ArticleCan't Stay Connected to Web GUI
I'm having a strange issue that just popped up. I'm not able to stay connected to the web interface for more than 10-15 seconds before I get a message saying "Unable to connect to the router. Please...
View ArticleDNAT with multiple ! (not) destinations
I have a DNAT rule that forces all clients to a Google DNS server, the problem I having is with the "!" (not) setting. I need to be able to specify multiple "!" (not) addresses or use "!" (not) with...
View ArticleRouter Setup Question - No WAN Access on eth2
I had a 3 port edge router lite. I honestly can't remember which wizard I chose during setup but currently I have eth0 as WAN and eth1 going to a switch. I had eth2 disabled up until today when I...
View ArticleRe: Error message pppoe from CLI
afaik, mostly older ERL in plastic case had this USB drive problem.Repeat that command the next days, and see if something is filling up.Maybe a setting in your config causes heavy logging, filling up...
View ArticleRe: ER-8 Not replying to ARP broadcasts
Isolate the ER from the network, and only plugin a PC on one of its ports, and test ARP.Use sniffer on both sides
View ArticleRe: IPSEC VPN Help
What's inbetween the ERL and ERX? It should route between 11.11.11.11 and 22.22.22.22Also , the tunnel must be initiated by traffic from localLAN destined to remoteLAN (or the other way around). Run...
View ArticleRe: Can't Stay Connected to Web GUI
How did you re-run the setup wizard? It requires browser connection.
View ArticleRe: DNAT with multiple ! (not) destinations
add a dNAT exclude rule before, and use it to specify destinations that shouldn't be NATted
View ArticleRe: EdgeOS Blacklist script
hello, I get a " Blacklist update failed ".How can i solve this ?amarcu5 wrote:New update Supports whitelists - both hard coded and URL's like the blacklistImproved error resilency - no partial...
View ArticleRe: EdgeRouter X SFP Dual Wan QoS Question
Indeed use WAN port to do QoS using advanced queue, or (imho deprecated) shaper.That's single point where you can "own the queue" and assign priority at will Other fancy queues use an internal port,...
View ArticleRe: OpenVPN Client Setup help please
Hi: Could you post your config, please? I'm struggling to do the same thing - firewall blocks vtun0 getting an IP addressI can't set traffic to route through vtun0Thanks, Ram
View ArticleRe: Problem keeping or restarting IPSEC with Cisco RV180
Dear OzPHB, I see you have a experience with IPSec VPN. Could you help me in my problem.I have a CISCO RV180 router as a client and VPS with static IP (X.X.138.131) as a server (running up on the...
View ArticleRe: Error message pppoe from CLI
thanks @16againMy ERL is in metal and is recent manufactured so no problem in this case. otherwise, after 16 hours here is my space filling:Filesystem Size Used Available Use% Mounted on /dev/root 1.6G...
View ArticleRe: Vlan Aware on Switch0 unavailable now on V1.9.1
Figured it out after 2 days of lab experiments and printing the config wizards of load balancing, basic config, WAN+2lan2 ect..
View ArticleRe: L2TP Stopped working after working fine for over a year.
Ok so there must be some kind of bug that I hit with the firewall because none of my newer rules were hitting. I was getting ready to do a factory reset, but before that I made sure went around and...
View Article
More Pages to Explore .....