Re: L2TP VPN - Clients can only access local interfaces, no LAN or WAN access
oooops - i'm sorry, i see that you already have that/....
View ArticleRe: L2TP VPN - Clients can only access local interfaces, no LAN or WAN access
Jackson, I'm not an expert at this, but i just hakced my way through getting mine to work and thought i could help...i'll leave you in better hands who know my than i do! lol I'll leave you with one...
View ArticleFeature Request: Adding support for Open vSwitch
Hello, I need to have Open vSwitch on my EdgeRouter ErPOE-5. I tried to add debian repository, i've installed it, but i've the following error when i try to start the service (openvswitch-switch) :...
View Articlerouting with static ip BEHIND router
I have an unusual request. I have a small tower site that is setup on my routed network that has a static ip address that everyone on that tower shares. (hepls me figure out when i get a spamming...
View ArticleRe: L2TP\IPSEC VPN works, then stops until reboot. xl2tpd process at 99% CPU.
This exact problem showed up on another client's firewall, and I was able to gather some logs. I don't see anything here, but maybe somebody else can notice something? They reported VPN issues, and...
View ArticleRe: [Bug?] EdgeOS 1.9.1: Bizarre routing behavior with VPLS
I make make it wierder. Take the rotuers from above and add to the topology a bit. I've added a switch between routers R3 (config above) and R2. R2 is now an Edgerouter8Pro. I've also added R4 and...
View ArticleRe: Failing Setup for Centurylink Fiber
Remove the modem? Thats an interesting idea.When you say lower the MTU, just how low, right now I have all ports set at 9000?I typically use the wizards since the CLI scares the life out of me.
View ArticleRe: Another VLAN config question (ER PoE & TL-SG1024DE)
Sorry I didn't reply sooner; I was setting up my AP-AC-M-Pro yesterday. With the devices you listed, tag ONLY ports 1 and 10 in your TP-Link VLAN configuration! Your Apple devices will not be able to...
View ArticleRe: Multiple WAN QoS
That's just how QoS works. First try to delay packets, and if packet rate remains too high, drop excess packets. That'll slow them down...hopefully. (at least, works for TCP) Since it's working now,...
View ArticleRe: Failing Setup for Centurylink Fiber
Its really easy to setup via CLI. I highly recommend using it to setup the ERL. The GUI is fine as well though. You just need to make sure to set it up correctly.I personally use the ERL connected...
View ArticleRe: Failing Setup for Centurylink Fiber
Is there anywhere I could find a tutorial on the CLI setup for CL fiber? I'd rather not just copy and paste.It seems like my best best for now is to setup the ER in a test environment, do the CLI setup...
View ArticleRe: replacement for Edgerouter
Why is only eth0 affected in the log? For test, try with an extra dumb switch inbetween ER and ISP modem . If the remote device brings down its ethernet interface, eth port on ER also goes down, the...
View ArticleRe: EdgeRouter Lite died
Bought a serial port for my PC motherboard and it started to work as expected. Don't know why but my SERIAL-USB cable doesn't work with this router.
View ArticleRe: Failing Setup for Centurylink Fiber
I can help. but my experience is more with the Unifi product line. in my experience the only way to really get CL Fiber to work with UBNT is via cli.
View ArticleRe: Failing Setup for Centurylink Fiber
My mother has the same service as you. Here is the config I use for hers. There really isn't a tutorial per se, you have to enable VLAN 201 tagging, PPPoE login, whether you do it via GUI or CLI. I...
View ArticleRe: Failing Setup for Centurylink Fiber
Thanks everyone for all your help. I will setup the test environment this afternoon and report my findings to everyone today. Wish me luck!
View ArticleUnbound DNS ad blocking problem
I've had no issue getting Unbound up and running on my EdgeRouter Pro. Here is my unbound.conf # The following line includes additional configuration files from the # /etc/unbound/unbound.conf.d...
View ArticleRe: IPsec Routing issues
More reading and I see the GRE seems to be the best route from what others have posted. So again I have a perfect working IPSEC tunnel I attempted to add GRE and get this error (At End) Here is the GRE...
View ArticlePlex and ERL Not working on LAN or remote
Hey folks, first of all, I am a newbie here. I was advised by a tech friend to get Ubiquiti products when I had my new fiber internet installed so I did. I am sincerely trying to learn how to use this...
View Article
More Pages to Explore .....