Re: VPN L2TP connected but no remote access to LAN
I was able to fix my problem.I set the dhcp pool for the lt2p clients within the subnet of my local lan (but outside of the local lan dhcp range), then set the "local-ip" of the lt2p vpn settings on...
View ArticleRe: Edgemax with Google Fiber and TV
: In rule 40 and 50 of your WAN_IN, I see you have "invalid enable" as well as "new enable." Do you purposely want to enable this rule for an invalid packet, or was that a copy-and-paste holdover from...
View ArticleRe: Plex and ERL Not working on LAN or remote
When you say you can't it to work on the local LAN or remotely, what are you testing?Does going to https://192.168.1.68:32400/web work on the local LAN?If that works then it may be worth checking the...
View ArticleRe: Edgemax with Google Fiber and TV
Updated configs now posted, which should support the Google TV changes.
View ArticleRe: ECMP OSPF masquerade problem
Hi to all. I'm retrying to work with ECMP OSPF between an edgerouter X SFP with two L3 links (radio) to a PA-VM 100 (Palo Alto Networks).In PA vRouter i've enabled ECMP and added on edgerouter and on...
View ArticleRe: Plex and ERL Not working on LAN or remote
Thanks for the reply. Going to https://192.168.1.68:32400/web worked just fine. None of the plex apps on my phones/ipads/rokus will work though. They all say cannot connect to the server. I unchecked...
View ArticleRe: Edgemax with Google Fiber and TV
sjjenkins wrote:@lignumaqua: In rule 40 and 50 of your WAN_IN, I see you have "invalid enable" as well as "new enable." Do you purposely want to enable this rule for an invalid packet, or was that a...
View ArticleRe: Hosting a local website - issues with port
Would my hostname be my domain name or the address to my pi site? For example, my pi website is xyz.domain.com Not sure if my hostname should be domain.com or xyz.domain.com --- Also, how do I go...
View ArticleRe: ubnt-discover interface disable not working
afaik, ubnt-discovery protocol uses udp port 10001 as destination, whereas your config shows all different ports. Is it possible some packets on your LAN get NATted out somehow?
View ArticleRe: Edgerouter Lite - High CPU usage
It occurs after about a minute after bootEdgeRouter Lite running EdgeOSv1.8.5It is for a small business that has about 20 workstations and 15 voip phones. firewall { all-ping enable broadcast-ping...
View Articleblock torrent with DPI ER-8-Pro from gui
anyone here know how to block torrents using DPI and the gui and feels like sharing how to do it?cli would work too
View ArticleRe: ER Lite with BT Hub & 4G Router setup - how?
Turns out, with a lot of head scratching and hair pulling, I've solved it indeed in the end it was rather trivial.All it finally took was a diagram off a basic networking example that made me realise...
View ArticleIPv6 no internet access
Hi,I've got an ERP8 connected to our ISP via eth0 on vlan 1999, vln 1999 is running dual stack and theres transit networks for both IPv4 and IPv6 on that vlan.IPv4 is fine all working happy days.IPv6...
View ArticleRe: VPN (L2TP/IPSEC) not connecting to one WAN link
Anyone have any ideas on what could be causing this? or you guys usually have some ideas...?
View ArticleRe: Multiple WAN QoS
Gotcha. So here is the config. First I added the firewall modify rules to mark incoming packets on the WAN interfaces. admin@ubnt# show firewall modify...
View ArticleRe: IPv6 no internet access
I may have found the issue, I can now ping inbound...the IPv6 side of the ERP seems to be a little...flaky? Applying the ACL's seems to take quite a while before taking affect.BTW does anyone know if...
View ArticleRe: IPv6 no internet access
nope not fixed for some reason inbound ping is intermittent. Works maybe 1 on 10 attempts for around 10 pings.Very strange.The ACL i've got on the WAN for IPv6 is as follows;Default-action accept -...
View ArticleRe: IPv6 no internet access
Make sure your firewall config is allowing the ISP to do a neighbor discovery. I have found some providers dropping the route for delegated prefixes after a period of time if they can't complete a...
View ArticleRe: IPv6 no internet access
Thanks for the info johnsom, I'm assuming that should be fine at the moment...with the default action being accept. I have just noticed that the allow establised/related rule doesnt have a protocol...
View ArticleNewbie: Vague question about slow speeds
Hi. I'm a new Ubiquiti user, and have a horribly broad question that I will do my best to help me get the right answer.... I'm "competent" with computers, use Linux, etc. but I'm in no way skilled or...
View Article
More Pages to Explore .....