Re: No default route with dhcp client.
What kind of IP is not the key, the key is default router.
View ArticleRe: Consistent Packet Loss
Ozwald wrote: I saw the notes about ipv4 offload, which I enabled. I also saw the notes about UDP packet loss with firmware 1.9.1, (known issue) so that can account for the VoIP side, but Lync and...
View ArticleRe: Consistent Packet Loss
Ozwald wrote:Quick update: New router arrived yesterday, updated, loaded config. Same issue. Still dropping packets like a champ. I really like this platform and want it to work. But it doesn't....
View ArticleRe: Known Issues of EdgeMax Series
5 Offload a) 1V1.9.1B1 still crashes ERXs w/ HW offload and bi-directional iperf3 (Status: under investigation) , By itself, the bi-directional iperf3 crashing ERXs bug is probably not a...
View ArticleRe: Help needed with DNS on L2TP VPN
I've now done the following in the VPN client:In the IPv4 connection properties I've manually set the preferred DNS server to 192.168.0.1In the advanced TCPIP settings I've enabled "use default gateway...
View ArticleRe: Brand new EdgeRouter PRO bricked after firmware update
It seems like this is probably a hardware failure, so I'm RMAing it.
View ArticleRe: L2TP VPN - Clients can only access local interfaces, no LAN or WAN access
hey jackson, Have added a: listen-on l2tp0 to your dns forwarding? dc
View ArticleRe: Consistent Packet Loss
Thanks for the reply. The end game is, I've narrowed this down to the EdgeMax. The reason for the swtich was bandwidth, I have 1gb via AT&T fiber. My Soniwall was 100mb TZ, which ran fine, but...
View ArticleRe: Consistent Packet Loss
Ozwald wrote: I don't mind hacking away at this, but in the same breath, I just want something that works and with the ERL, Its eveident that to get the best performance you need to disable feature to...
View Articlein your opinion
Hi I am a beginner and i m trying to understand my erx (1.9.1) DNS forwarding seems to be out of order & and i would like to be sure about my configuration.VLAN10 (Guest connection can't to access...
View ArticleRe: in your opinion
firewall { all-ping enable broadcast-ping disable group { address-group CAM { address 192.168.11.70 address 192.168.11.71 address 192.168.11.72 address 192.168.11.73 description "Cam IP" }...
View ArticleRe: All updated....need port forwarding and config advice, please
I've got a few ER-Xs and until you mentioned it I hadn't even considered the smaller memory footprint.Have just checked a couple of them and luckily neither was using more than 60%, but I'll keep a...
View ArticleRe: Why does host file have empty permissions?( re: dnsmasq and permission...
This issue is still present in 1.9.1, happened to me this morning when I tripped the breaker on my UPS. Running an ER-X. It was also reported here:...
View ArticleRe: L2TP VPN - Clients can only access local interfaces, no LAN or WAN access
budcar wrote:hey jackson, Have added a: listen-on l2tp0 to your dns forwarding? dcNo, but DNS works regardless. DNS works when I query the listening address as well as any other interface that I add...
View ArticleRe: All updated....need port forwarding and config advice, please
I typed this like 2 times, then figured I was rambling too much.. lol Short answer: I have 3 Unifi APs (standard 2.4ghz)I also have 1 more of those in a box and a Unifi-AP-Lite as well. I plan to use...
View ArticleRe: L2TP VPN - Clients can only access local interfaces, no LAN or WAN access
goldlineIT wrote:Post your whole config, your VPN config doesn't make any sense at this pointI was hoping to avoid having to sanitize the whole config as it is quite large but I have included it below....
View ArticleRe: L2TP VPN - Clients can only access local interfaces, no LAN or WAN access
Part 2 protocols { bgp 65442 { neighbor <ISP IP> { password <pass> prefix-list { export EXPORT-AS65442 } remote-as <ISP ASN> soft-reconfiguration { inbound } update-source <public...
View ArticleRe: L2TP VPN - Clients can only access local interfaces, no LAN or WAN access
I see you're using zone based FW - as i am. You need to and the VPN interface to a zone-policy at the end of your config. For me, I just added the interface to the lan i most wanted my VPN users to...
View Article
More Pages to Explore .....