Re: UDP packet loss with EdgeRouter Lite
smtharrison - make sure that Traffic Analysis is disabled on the router. Turning that off made a big difference for me in the ERLite. Dramatically reduced the picture pixelation I was seeing.
View ArticleRe: UDP packet loss with EdgeRouter Lite
smtharrison wrote: Was this ever addressed?No, but the bug is unique to the ERLite. The ER-X has no issue with packet reordering, which is why I switched to it last year and never looked back. It has...
View ArticleEdge router DSL bonding
Hello, Is the edge router capable of DSL bonding? I want to bond multiple DSL connections, I am currently using a $50 mikrotik router which is working fine for about 60 subscribers. However, I do want...
View ArticleRe: OpenVPN and PPTP/L2TP clients on one router do not talk to each other ?
I have 3 Edgerouters which are connected together with 2 OpenVPN links. I use 10.0.x.x networks. Each router has 2 or 3 LAN networks. I have OSPF setup for routing. No static routes are defined, other...
View ArticleRe: ERX as core VPN router
Should be able to do that by creating a VTI for every ipsec tunnel and use OSPF for rounting on those tunnels.
View ArticleOpenVPN client tunnel help
Hello, What I an trying to do is route certain clients over the VPN tunnel. I would love to use the functionality of "detour"...
View ArticleRe: IPSec performance issue
Hello I have been looking for any solution of my one-way slow IPsec tunel and came across this thread.I am experiencing the very same troubles on my tunel established between ERL (v1.9.1) and Mikrotik...
View ArticleRe: mDNS repeater is killing my EdgeRouter Lites
In Router 1 I have: set interfaces vti vti0 address 10.0.10.1/24 and in Router 2 I have: set interfaces vti vti0 address 10.0.11.1/24 Is this right? Should the addresses be different at each end? Or...
View ArticleRe: UDP packet loss with EdgeRouter Lite
Rodney, that's all I'm doing with it, just very basic routing (a few static routes and that's it) and one masquerade NAT to an internet connection.The router is definitely reordering packets. When I...
View ArticleRe: OpenVPN and PPTP/L2TP clients on one router do not talk to each other ?
your pptp clients can talk to each other...because they are on the same subnet. pptp only negotiates the IP address, and uses classfull logic to determine what traffic to route onto the...
View ArticleDownload speed at a fraction of what it should be
Hello BackgroundI'm getting ridiculasly slow download + upload speeds on my Asus Aspire notebook; something like 3 Mbps down and 4 up. This is going through an Edge Switch Lite 24 and a Edge Router...
View ArticleRe: OpenVPN and PPTP/L2TP clients on one router do not talk to each other ?
@@GSTthis is exactly what I want to achieve, but still have not found the right way. Do you think you could share your settings with me? on my laptop I have both L2TP and OPENvpn clients that are both...
View ArticleRe: DNS Forwarding 100K+ Entries
So far so good. I've made a few changes with the DNS servers. Google DNS got entirely replaced with the OpenDNS servers. Just because after repeatedly running namebench from Google. The OpenDNS servers...
View ArticleRe: OpenVPN and PPTP/L2TP clients on one router do not talk to each other ?
If you would use 10.x.x.x IP addresses everywhere, you would be better of. that's class A, giving 10.0.0.0/8 route.Do you mean using 10.x.x.x on all VPN clients? I am using this, except for the...
View ArticleRe: Download speed at a fraction of what it should be
Are you shapping traffic with your router?
View ArticleRe: OpenVPN client tunnel help
Looking at your config, You haven't followed any of the installation instructions listed on github. So,,,,,,,you should probably start there.
View ArticleRe: OpenVPN and PPTP/L2TP clients on one router do not talk to each other ?
On your laptop connected using L2TP you should get an 192.168.33.x ip. I assume the router has the 192.168.33.1 IP? if so your gateway should be 192.168.33.1. You can try adding...
View ArticleRe: OpenVPN client tunnel help
I though it might be easier to read the config because I tried several things, so I delete them. But the problem was that the clients were in the VLAN. Once I put a client on ETH1 instead of vif 1.20,...
View ArticleRe: EdgeRouter ERPoe‑5 on firmware v1.9.1 crashes approximately every 36 hours
Seems to me the message log posted is from after the reboot.
View Article
More Pages to Explore .....