Re: EdgeRouter ERPoe‑5 on firmware v1.9.1 crashes approximately every 36 hours
Hi: I do log to syslog on my Linux server, and sadly, there's not much there either. I'll try to get the console cable set up to see if that provides anything additional when it barfs.
View ArticleRe: OpenVPN and PPTP/L2TP clients on one router do not talk to each other ?
Thank you for your help. I have not a problem with accessing (through OVPN clent) any of my local network and PC behind my routers, these routes work fine. The issue is that that I cannot access...
View ArticleRe: EdgeRouter X - Segregating IoT subnet from other subnets
I *think* what you are saying is you want the following: eth0 - WANeth2 - IoTeth1,3,4 - LAN If so, you want your switch-port like so: switch switch0 { address 192.168.2.1/24 description Local firewall...
View ArticleRe: Routing problem with OpenVPN
Opening post states:But if i add a route as follows on the computer i want to reach it works just fine. route add -net 172.17.0.0 netmask 255.255.0.0 gw 172.16.1.1Doublecheck: Hosts on both the...
View ArticleRe: Best way to segment a small/medium business network
goldlineIT wrote:Although I could be dead wrong, I am going to guess that you have never even come close to saturating 1Gb of that 4Gb LACP, although its cool its not necessary for your small business....
View ArticleRe: Routing problem with OpenVPN
16again wrote:Opening post states:But if i add a route as follows on the computer i want to reach it works just fine. route add -net 172.17.0.0 netmask 255.255.0.0 gw 172.16.1.1Doublecheck: Hosts on...
View ArticleRe: EdgeRouter X - Segregating IoT subnet from other subnets
I didn't have a chance to troubleshoot this earlier this morning, but there's something wrong with the configuration I posted above. I didn't notice it at first, but I could not get an address when...
View ArticleRe: Applying Firewall rules to IPsec with VTI
Maybe direction?VTI_IN is packets from remote, entering your sideVTI_OUT is packet you're sending through tunnel to remote Just tested, only VTI_OUT works.
View ArticleRe: Best way to segment a small/medium business network
You would set it up on the DNS so that depending on what subnet you are on it would give you the correct address. What are you going to be using for your name server windows?
View ArticleRe: Best way to segment a small/medium business network
goldlineIT wrote:You would set it up on the DNS so that depending on what subnet you are on it would give you the correct address. What are you going to be using for your name server windows?I wanted...
View ArticleRe: Best way to segment a small/medium business network
Hmm, you would have to test it out if your using the edgerouter, I am not sure if there would be a way to do what I am saying with the edge router DNS, Its best to leave that as just a router. I guess...
View ArticlePolicy Based Routing to sw0
Good afternoon everyone, I'm relatively new to this, and am currently trying to set up policy based routing to accomplish an end goal, but I'm not entirely sure if policy based routing is what I want...
View ArticleRe: Cellular failover
get a jetpack from verizon put it in dmz mode and plug the usb into the er-pro. In theory it will work. Though you would have to do some testing. refer to the thread about connecting 4g modems to the usb
View ArticleSyslog not sending messages to remote host
I cannot get any messages sent to my graylog server. There is very little for me to go on, as everything seems configured correctly, and there are no errors that I have encountered. The logs are...
View ArticleRe: Applying Firewall rules to IPsec with VTI
Still not working.Packets going right through. Router A is 10.0.0.0/24Rouber B is 192.168.1.0/24 On router A i have a Ruleset vti2/out default action drop.I've also went and created a rule Source...
View ArticleRe: Cellular failover
I just searched for the thread and couldn't find it. I'll post it if I run into it
View ArticleDirect VPN to an ER 8 Pro
Hican I make a VPN into an ER 8 Pro and should not use a radius server So you sit outside you Internet cell far far away and can you then access the ER 8 Pro via a direct VPN so you can access radios...
View ArticleRe: Direct VPN to an ER 8 Pro
Djursland01 wrote:Hican I make a VPN into an ER 8 Pro and should not use a radius server So you sit outside you Internet cell far far away and can you then access the ER 8 Pro via a direct VPN so you...
View ArticleAdding site to site tunnel with existing L2TP/Ipsec VPN
At our office I have an ER-5 PoE running with an L2TP/Ipsec VPN already configured (via CLI following guides here) for mobile users, no problems with that. We are adding a second remote office for our...
View ArticleRe: Applying Firewall rules to IPsec with VTI
Do you actually have the chain applied to the interface???? Post your config.
View Article
More Pages to Explore .....