Re: Firewall rules
configure edit firewall name ETH2_BLOCK set default-action acceptedit rule 10set action acceptset state established enableset state related enableupedit rule 20set action dropset state invalid...
View ArticleRe: EdgeRouter and AT&T Uverse optimization
Do you have offloading enabled? configure show system offload exit
View ArticleRe: IPv6 DNS server for Windows 10 computers
So it would be easy to add another subnet and I'll try that. But since the LAN ipv6 networks get dynamically assigned by comcast how would I make the dhcpv6 subnets match dynamically?
View ArticleRe: Dynamic DNS with AWS Route53
Thanks Tywin, this is really great! It works without any non-config customizations, an elegant and ideal solution.
View ArticleClik here to view.
Re: IPv6 DNS server for Windows 10 computers
This is my new dhcp code, still no joy dhcpv6-server { shared-network-name LAN1-IPv6 { name-server 2001:4860:4860::8888 subnet 2601:1c0:5902:a8c1::1/64 { name-server 2601:1c0:5902:a8c1::1 } }...
View ArticleEdgeRouter Lite and IPV6
Talk about frustrating, getting IPV6 working on an Edgerouter Lite is an unnecessarily draconian task. There is a checkoff or 2 in the V 1.9.1 firmware Setup Wizzard and I can get the Wan to pull a V6...
View ArticleRe: Firewall rules
Splendid, that worked thanks! If I wanted to change it later where I wanted eth3 thru 7 to only talk to eth0 an 1, e.g. eth7 would be blocked from communication with eth 5 and vice versa, do I just...
View ArticleRe: Known Issues of EdgeMax Series
ER3-LITE and EGEMAX SFP have a bug while creating a QOS with Basic QUEUE. Any configuration you set apply a default global configuration of 1000mbit/secWhile using HWNAT and mutiple VLAN with VLAN...
View ArticleRe: EdgeRouter and AT&T Uverse optimization
Thanks for the replies. I should probably follow suit and change the default IP of the modem. What I have is the Motorola Pace 5268AC FXN (I think). I have just Internet only for it, no TV. I also...
View ArticleRe: Firewall rules
First, if my post solved your problem, mark it as the solution from that post's Options menu. Kudos are nice too. Next, don't just run those rules. Take the time to understand them and learn as this is...
View ArticleRe: EdgeRouter and AT&T Uverse optimization
I don't have the Pro but I think it matches my ERL in this regard. Try configure set system offload ipv4 forwarding enable commit save exitI really recommend reading about CLI on the ER's. It may seem...
View ArticleClik here to view.
Re: EdgeRouter and AT&T Uverse optimization
Much appreciated. I added the offload command and saved. I am experienced with tab commands with linux and cisco so I can see the relation in Vyatta. I do try to figure these out on my own first but...
View ArticleRe: EdgeRouter and AT&T Uverse optimization
commit makes the offload commands take effect as far as I know but not 100% sure.
View ArticleRe: UDP packet loss with EdgeRouter Lite
Good afternoon guys, Was this ever addressed? I think I ran into the same problem here. I manage a network for a local TV station. They used to use a Cisco SB router for stuff. They recently moved,...
View ArticleRe: Why I can't ping the host on my LAN from router.
I can ping the IP address but not via the host name. For example: In a windows machine, I can ping either by name or by IP. C:\Users\Henry>ping PET20Pinging PET20.Dewitt22 [186.168.1.200] with 32...
View ArticleRe: Why I can't ping the host on my LAN from router.
So DNS from the router is failing. Try configure set system name-server 127.0.0.1 commit save exitwhich will make your router use the dns forwarder on the router for domain resolution.
View ArticleIPv6 PPPoe not working
Hello everyone My ISP (So-net, Japanese fiber optics based one) has a very peculiar setup: they require establishing two separate PPP sessions for IPv4 and IPv6 connectivity to the internet. I can...
View Article
