Re: MS PPTP client to far end PPTP server connects, but is very slow
I knew about the forwarding and NAT not being needed and I forgot to remove the NAT rules. I've removed those and will see if things are any better. As for PPTP, I shouldn't have to configure anything...
View ArticleRe: Discover Unifi AP over VPN. Config EdgeRouter
Fast way ...on the ER-L, forward the tcp 8080 to the controller's ip address, and 'tell' to the remote AP that the controller is at 192.16810.4Cheers,jonatha
View ArticleRe: MS PPTP client to far end PPTP server connects, but is very slow
Rylos wrote:As for PPTP, I shouldn't have to configure anything to use PPTP from my laptop connecting to my office, maybe I wasn't clear but throughput sucks over PPTP right now since switching to the...
View ArticleRe: Edgerouter X 1.9.1 - Allow chromecast on guest network
This turned out to be a config issue on the Unifi AP itself. I had to SSH to the controller and create a config.properties file.
View ArticleUBNT fiber modules at 100mbits?
Are the 1G UBNT SFP's capable of negotiating at 100 mbits? Specifically, if I install one in an ER-X-SFP and one in a media converter that has a 100baseFX SFP port, will they link up?
View ArticleRe: Discover Unifi AP over VPN. Config EdgeRouter
Hi Jonathaitried it. see jpg.dont work.
View ArticleRe: Wake on LAN no longer an available package?
Well after trial and error I found that there is a package called "etherwake" already installed on firmware 1.9.1. So I used the following command to send WOL packet. I have not yet confirmed if this...
View ArticleRe: Discover Unifi AP over VPN. Config EdgeRouter
yeahhh works. Wrong ip in Port forwarding. i write 10 but is 100, Tank you very much
View ArticleRe: UBNT fiber modules at 100mbits?
I have not used them but I doubt it. I've always had to buy 100FX GBICs for other brands.
View ArticleSecure guest VLAN and allow guest portal to main LAN
Hi all, I'm struggling to allow the unifi guest portal from the guest VLAN (vlan10), 10.190.22.0/24, router on 10.190.22.1 to reach the controller on the main LAN (default vlan1), 10.190.30.0/24,...
View ArticleRe: Secure guest VLAN and allow guest portal to main LAN
Don't use the switch0, rather than create the interface switch0.5, and use it as trusted network, seems that there are some routing issues if are used the switch0 and the switch0.X...
View ArticleRe: MS PPTP client to far end PPTP server connects, but is very slow
Can you try playing around with offload settings? disable it , only disable gre, or enable both gre and forwarding
View ArticleRe: UBNT fiber modules at 100mbits?
Thanks, Claude. Do you know if they will negotiate with a 100mbit GBIC at the other end of the line?
View ArticleWindows DHCP clients have to use FQDN to resolve local hosts
Hi, All of my DHCP clients running Windows (Vista, 10) require the FQDN to resolve. Here's my DHCP config: admin@ispd-gw# show service dhcp-server disabled false hostfile-update enable...
View ArticleRe: DNAT rule will not fire if inside/outside port numbers are different
Hello bumping this thread, im in the exactly same situacion but not saavy on the CLI I understand the theory but... how does the dnat rule look on the GUI? I havein DNATInbound interface, the proper...
View ArticleRe: DNS: resolv.conf not sync'd to hosts?
I have been doing the static host mapping via the GUI in the DHCP area, not in the CLI.
View ArticleRe: Load balancing 2 WANs, same isp
one thing is not clear for me: case 1: I hook up two modems or bridged routers from the same ISP and both give the USG public IP with same subnet/gateway. This does not work. case 2: I hook up two...
View ArticleRe: DNS: resolv.conf not sync'd to hosts?
that is static-mapping for dhcp clients. As far as I know dhcp doesn't update dns records on the edge router. But i could definitely be wrong.
View ArticleRe: Comcast dscp and VOIP QOS
On my side, I am a residential customer [actually my parents] using Comcast with a Motorola Surfboard SB6121. Comcast > SB6121 > ERX/ETH0 > ETH2 > LineLink ATA > DECT phone Let us know...
View ArticleRe: Understanding PVID and VID functionality
After a lot of struggling with muddy documentation, I found the tutorial below to be an outstanding resource for understanding PVID, VID, VLANs and 802.1q implementations along with some excellent...
View Article